Text preview for : 7jsmtm1.pdf part of panasonic 7jsmtm1 panasonic Audio SA-PTX7EB MD0704019CE doc 7jsmtm1.pdf
Back to : 7jsmtm1.pdf | Home
Item Key Operation
FL Display
Mode Name Description Front Key
Service mode To enter into service mode. (Display 1) In STOP (no disc) mode,
entering select DVD/CD and press
[STOP] button on the main
unit, followed by [ 10] button
and [0] button on the remote
(Display 2) control unit.
Error code Error code check In SERVICE mode, press [1]
check The latest error code stored in the button on the remote control
EEPROM IC is displayed. unit. Error code will be shown
on the FL Display.
To clear the error code,
Error code Error code no. press [0] for 5 seconds
record or more.
By pressing the up/down key on the remote
control. You can view the next or previous
Note: Refer to "Section 10.3 DVD Self error codes present.
Diagnostic Function-Error Code" for When there is no error present, the FL
more detailed information on the error display shows as below:
codes.
To exit, press [POWER]
button on main unit or
remote control.
Micro-processor Micro-processor firmware version (Display 1) In SERVICE mode, press [2]
firmware version display & EEPROM checksum display. button on the remote control
display & EEPROM checksum is only available unit.
EEPROM due to existence of EEPROM IC.
checksum
display. FL Display sequence:
Display 1 2 3 4 5 6 7. Main
micro-processor
firmware version no.
(Display 2)
Press [FL Display] button on
remote control unit for next
page. (FL Display)
Sub micro-processor IC (Digital P.C.B.)
firmware version no. for YYY. ZZ is for
the checksum no. if EEPROM IC
is present.
(Display 3)
Kernel firmware version
(Display 4)
Miniboot version no.
(Display 5)
Fs version no.
(Display 6)
DSP MICRO-PROCESSOR IC
FIRMWARE VERSION
(Display 7)
To exit, press [POWER]
button on main unit or
remote control.
Misty key no.