Text preview for : 7jhmect.pdf part of panasonic 7jhmect panasonic Audio SA-PTX7EB MD0704019CE doc 7jhmect.pdf
Back to : 7jhmect.pdf | Home
Error
Diagnosis Contents Description of error Automatic FL Display Remarks
Code
U702 HDMI/DVI I2C The communication error of I2C Press [ STOP] on
communication error when connecting it with HDMI/ main unit for next error.
DVI. For instance, when EDID
information to which information on the
TV set side has been described
cannot be read, it is generated.
U703 HDMI/DVI attestation When attestation (HDCP) with the TV Press [ STOP] on
error side fails when connecting it with main unit for next error.
HDMI/DVI, it is generated.
U704 HDMI/DVI SRM It is generated at the equipment to Press [ STOP] on
Riborcerar which the TV set is Riborced when main unit for next error.
connecting it with HDMI/DVI.
U705 HDMI/DVI SRM disk It is generated at the time of it is time Press [ STOP] on
falsification check when illegal the SRM data of the main unit for next error.
error reproducing disk (verify error), when
connecting it with HDMI/DVI.
F740 HDMI device key I2C error when writing HDMI Key Press [ STOP] on
device into transmitter. main unit for next error.
F893 FLASH ROM IC data Firmware error, DV5 LSI IC (IC8651) Press [ STOP] on
falsification error error. main unit for next error.
F894 EEPROM IC When failing in the access to Press [ STOP] on
abnormality error EEPROM IC located in the DVD main unit for next error.
(HDMI) Module P.C.B. (IC8611)
F895 Language area Firmware version agreement check for Press [ STOP] on
abnormal factory preset setting failure main unit for next error.
prevention.
F896 No existence model Firmware version agreement check for Press [ STOP] on
factory preset setting failure main unit for next error.
prevention.
F897 Initialization Incomplete initialization after writing of Press [ STOP] on
error new firmware (Factory preset setting main unit for next error.
failure prevention)
F898 Disagreement of Unsuitable combination of AV Decoder, Press [ STOP] on
hardware and SDRAM & FLASH ROM IC (firmware). main unit for next error.
software
F899 The communication Unsuitable combination of number of Press [ STOP] on
specification system com and panel com used. main unit for next error.
disagreement (Frimware)
between
micro-processor