Text preview for : 7jbhdd2.pdf part of panasonic 7jbhdd2 panasonic Audio SA-PTX7EB MD0704019CE doc 7jbhdd2.pdf
Back to : 7jbhdd2.pdf | Home
To cancel backup
Backing up data recorded to the HDD 1 Press and hold [ ] during backup.
Backup
Cautions about backup data: This function will pause and the po wer will turn off
immediatel y.
Be careful not to perform any of the following: Do you want to contin ue?
Do not open backup data with applications or software, Yes No
and do not change the contents. ENTER
Do not compress the backup data.
Do not change the backup data file name or change the 2 Press [ ] to select "Yes" and press [ENTER].
This unit turns off and backup canceled.
saved location.
To continue a previously canceled backup
Perform "Preparation" and "Settings to check on the PC" as 1 After backup is canceled, press [ ] to turn the unit on
described on OI page 81. again.
The following message is displayed.
1 Press [SETUP]. Incomplete Bac kup
2 Press [ ] to select "Other Setup" and press Backup is incomplete .
Do you want to resume Bac kup?
[ENTER].
Yes No
3 Press [ ] to select "Maintenance" and press [ ]. ENTER
4 Press [ ] to select "Backup/Restore" and press 2 Press [ ] and select "Yes", then press [ENTER].
[ENTER]. Follow the steps given on screen, and start backup again.
5 Press [ ] to select "Backup" and press [ENTER].
Backup Note
PC Name When the backup is canceled partway through, the data
User Name becomes unusable. Finish the backup as soon as possible.
The settings for the Power Off Mode for this unit will enter
C
Passwo rd
Backup Cancel
"Power-Save Mode" ( OI page 88) until the backup is
complete.
ENTER When performing a backup, all timer settings will be set to
Cancel
"Off". If you use a timer, you will need to set to "On" again
( OI page 79).
6 Press [ ] to select "PC Name" and press [ENTER].
When the PC name is displayed If the backup aborted due to critical errors or abnormal
The PC name and other information that was used when termination
previous backups and imports ( OI page 44) were After the message is displayed on the unit, this unit will
performed may be displayed. In this case, check the PC automatically turn off.
name again, and if necessary, follow the steps below to In this situation, turn the power on again and continue the
make changes. backup.
7 Enter the characters ( OI page 62).
Input the "User Name" and "Password" in steps 6 and 7 in A note about the second (and subsequent) backups
the same manner. Only newly added tracks and changes made since the
previous backup was created will be backed up, therefore the
8 Press [ ] to select "Backup" and press backup will take less time to finish than the first time.
[ENTER].
Backup begins.
A message will be displayed, indicating that backup is
complete. The unit will briefly stay this way, and then it will
turn off automatically shortly after.
To return to the previous screen
Press [RETURN].