Sharp_repair_tips.txt part of Sharp Sharp repair tips Sharp_repair_tips.txt, Sharp Monitor Sharp_repair

Text preview for : Sharp_repair_tips.txt part of Sharp Sharp repair tips Sharp Monitor Sharp_repair_tips.txt

Back to : Sharp_repair_tips.txt | Home

================================================================================
MODEL: LC-32SD1E and probably other LC-xxSD1E where xx is screen size (in)
--------------------------------------------------------------------------------
FAULT: Red, green or blue tinting in dark areas
--------------------------------------------------------------------------------
DIAGNOSIS: None
--------------------------------------------------------------------------------
FIX: With the set in STANDBY (RED LED lit) press and hold on the top
controls CH- and INPUT.

Then press POWER switch down and wait 10 seconds. Release CH- and
input. The set will them power up normally. A small "K" will shortly
appear in the top corner of the screen.

Then press VOL- and CH- on the top controls, the service menu should
come up.

Scan through the menu pages using the UP and DOWN d-pad controls.
Scan through until you find the page with "EEP CLEARB". Select it
using the channel buttons. Do not select "EEP CLEAR"; it must be the
"B" variant. Press volume up to select and then enter, wait a few
seconds and it should be done.

Then scroll through the rest of the menus and select "FACTORY INI";
select Euro for European version, haven't tried other things yet.
Execute the option and wait about 10 seconds. Then power off the TV,
and power it back on again. You'll need to retune it, but it should
work fine.
================================================================================