Text preview for : DISASSY.PDF part of Nokia 3210 3210 part#1



Back to : 3210_1.zip | Home

PAMS Technical Documentation NSE­8/9 Series Transceivers

Disassembly

Issue 1 07/99

NSE­8/9 Disassembly

PAMS Technical Documentation

CONTENTS Page No
Dis­assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the B cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the A­cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the antenna and the D­cover . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the microphone, bottom­connector and PCB . . . . . . . . . . . . Removing the dome­sheet, display and multi­gasket . . . . . . . . . . . . . . 3 3 4 5 6 8 9

Page 2

Issue 1 07/99

PAMS Technical Documentation

NSE­8/9 Disassembly

Dis­assembly
Removing the B cover

STEP 1 Remove the B­cover Push down Release­button 1 Slide B­cover approx.: 5 mm in direction 2 Lift the B­cover up 3.

Issue 1 07/99

Page 3

NSE­8/9 Disassembly

PAMS Technical Documentation

Removing Battery

STEP 2 Remove the battery by pushing the snap 1,

Rotate around the end of the battery and remove it upwards according to 3.

Page 4

Issue 1 07/99

PAMS Technical Documentation

NSE­8/9 Disassembly

Removing the A­cover

STEP 3 Remove the A­cover

Issue 1 07/99

Page 5

NSE­8/9 Disassembly

PAMS Technical Documentation

Removing the antenna and the D­cover

STEP 4 Remove the antenna, one side at a time Only use angled tweezers. 1.Carefully push the end in between the side of the Antenna and the D­cover. 2.Bend out the side of the antenna carefully and lift the antenna out of the snap fit.

Page 6

Issue 1 07/99

PAMS Technical Documentation

NSE­8/9 Disassembly

STEP 5 Remove the screws (4x). When assembling, screw torque should be 30Ncm. with a Screwdriver speed 500­600rpm

STEP 6 Remove the D­cover ! Snap Fitting ! Open one side at the time Push a screwdriver in under the D­cover side flap 1 and bend out the side of the C­cover in the direction shown, 2.

Issue 1 07/99

Page 7

NSE­8/9 Disassembly

PAMS Technical Documentation

Removing the microphone, bottom­connector and PCB

STEP 7 Remove the Microphone and boot, by pulling straight up.

STEP 8 Remove the bottom­connector

Page 8

Issue 1 07/99

PAMS Technical Documentation

NSE­8/9 Disassembly

STEP 9 Lift up the PCB

Removing the dome­sheet, display and multi­gasket

STEP 10 Remove the dome­sheet

Issue 1 07/99

Page 9

NSE­8/9 Disassembly

PAMS Technical Documentation

STEP 11 Remove the display assembly

STEP 12 Remove the multi­gasket

Page 10

Issue 1 07/99