Text preview for : kma.pdf part of UCC kma . Electronic Components Datasheets Passive components capacitors Datasheets UCC kma.pdf



Back to : kma.pdf | Home

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 7mm height, 105C



KMA
@7mm height
105C
@Endurance : 1,000 hours at 105C
@Solvent resistant type (see PRECAUTIONS AND GUIDELINES) SRA
@RoHS Compliant

?SPECIFICATIONS
Items Characteristics
Category
Temperature Range -55 to +105C

Rated Voltage Range 4 to 63Vdc
Capacitance Tolerance P20% (M) (at 20C, 120Hz)
Leakage Current I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes)
Dissipation Factor Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V
(tane) tanE (Max.) 0.35 0.22 0.19 0.16 0.14 0.12 0.10 0.08 (at 20C, 120Hz)
Low Temperature Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V
Characteristics Z(-25C)/Z(+20C) 4 3 2 2 2 2 2 2
(Max. Impedance Ratio)
Z(-40C)/Z(+20C) 10 6 5 3 3 3 3 3 (at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 1,000 hours
at 105C.
Rated voltage 4 to 16Vdc 25 to 63Vdc
Capacitance change [P25% of the initial value [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage 4 to 16Vdc 25 to 63Vdc
Capacitance change [P25% of the initial value [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value


?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET : Brown)
FP0.5




FP0.5
Fd




fD 4 5 6.3
fd 0.45 0.45 0.45
FD'




or F 1.5 2.0 2.5
fD' FD+0.5max.
L' 15min. 4min. L' L+1.0max.
Gas escape end seal



?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

E KMA A A A E A A A A A M A A A D
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 10MF:100,100MF:101)
Lead forming