Text preview for : dl1740_dl1720_service_manual.pdf part of Yokogawa dl1740 dl1720 service manual . Rare and Ancient Equipment Yokogawa dl1700 dl1740_dl1720_service_manual.pdf
Back to : dl1740_dl1720_service_man | Home
Service
Manual
DL1720/DL1740
Digital Oscilloscope
SM 701710-01E
SM 701710-01E
4th Edition
Important Notice to the User
This manual contains information for servicing YOKOGAWA's DL1720 and DL1740
Digital Oscilloscopes, in particular the DL1740. Check the serial number to confirm that
this is the correct service manual for the instrument to be serviced. Do not use the
wrong manual.
Before any maintenance and servicing, read all safety precautions carefully.
Only properly trained personnel may carry out the maintenance and servicing described
in this service manual.
Do not disassemble the instrument or its parts, unless otherwise clearly permitted by this
service manual.
Do not replace any part or assembly, unless otherwise clearly permitted by this service
manual.
In principle, Yokogawa Electric Corporation (YOKOGAWA) does not supply parts other
than those listed in the customer maintenance parts list in this service manual (mainly
modules and assemblies). Therefore if an assembly fails, the user should replace the
whole assembly and not components within the assembly (see "Note"). If the user
attempts to repair the instrument by replacing individual components within the
assembly, YOKOGAWA assumes no responsibility for any consequences such as
defects in instrument accuracy, functionality, reliability, or user safety hazards.
YOKOGAWA does not offer more detailed maintenance and service information than
that contained in this service manual.
All reasonable efforts have been made to assure the accuracy of the content of this
service manual. However, there may still be errors such as clerical errors or omissions.
YOKOGAWA assumes no responsibility of any kind concerning the accuracy or contents
of this service manual, nor for the consequences of any errors.
All rights reserved. No part of this service manual may be reproduced in any form or by
any means without the express written prior permission of YOKOGAWA. The contents
of this manual are subject to change without notice.
Note
YOKOGAWA instruments have been designed in a way that the replacement of electronic
parts can be done on an assembly (module) basis by the user. YOKOGAWA instruments
have also been designed in a way that troubleshooting and replacement of any faulty
assembly can be done easily and quickly. Therefore, YOKOGAWA strongly recommends
replacing the entire assembly over replacing parts or components within the assembly. The
reasons are as follows: