Text preview for : pxs.pdf part of SMD pxs . Electronic Components Datasheets Passive components capacitors Datasheets UCC SMD pxs.pdf
Back to : pxs.pdf | Home
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount
@Super low ESR, high ripple current capability PXS
@Longer life (5,000 hours at 105C)
@Rated voltage range : 4 to 16Vdc, Capacitance : 22 to 560MF
Longer life
@Case size : F5B5.8L to F8B6.7L
@Suitable for DC-DC converters, voltage regulators and decoupling applications PXA/PXE
for computer motherboards etc.
@RoHS Compliant
?SPECIFICATIONS
Items Characteristics
Category
Temperature Range -55 to +105C
Rated Voltage Range 4 to 16Vdc
Capacitance Tolerance P20% (M) (at 20C, 120Hz)
Surge Voltage Rated voltageB1.15 (at 105C)
Leakage Current I=0.2CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc) (at 20C after 2 minutes)
Dissipation Factor
(tane) 0.12 max.
(at 20C, 120Hz)
Low Temperature
Characteristics Z(-25C)/Z(+20C)[1.15
(Max. Impedance Ratio) Z(-55C)/Z(+20C)[1.25
(at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours
at 105C.
Appearance No significant damage
Capacitance change [P20% of the initial value
DF (tanE) [150% of the initial specified value
ESR [150% of the initial specified value
Leakage current [The initial specified value
Bias Humidity The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to the DC rated voltage at
60C, 90 to 95% RH for 1,000 hours.
Appearance No significant damage
Capacitance change [P20% of the initial value
DF (tanE) [150% of the initial specified value
ESR [150% of the initial specified value
Leakage current [The initial specified value
Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.
Appearance No significant damage
Capacitance change [P20% of the initial value
DF (tanE) [150% of the initial specified value
ESR [150% of the initial specified value
Leakage current [The initial specified value
Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105C)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C.
?DIMENSIONS [mm] ?MARKING
@Terminal Code : A EX) 6.3V390MF
W
S69A
390
FDP0.5
CP0.2
BP0.2
Size Code fD L A B C W P
P
E61 5.0 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4 6.3V
F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
H70 8.0 6.7 8.3 8.3 9.0 0.7 to 1.1 3.1
0.3max. AP0.2
LP0.3
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
A PXS AAA A RA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47MF:470, 150MF:151)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 10V:100)
Series code
Category
Please refer to "Product code guide (conductive polymer type)"
(1/2) CAT. No. E1001K
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount
?STANDARD RATINGS
WV Cap Size ESR Rated ripple current
Part No.
(Vdc) (mF) code (momax/20c, 100k to 300kHz) (mArms/105c, 100kHz)
150 E61 25 2,150 APXS4R0ARA151ME61G
4
560 H70 22 3,220 APXS4R0ARA561MH70G
47 E61 30 1,970 APXS6R3ARA470ME61G
100 E61 25 2,150 APXS6R3ARA101ME61G
6.3 120 F61 22 2,570 APXS6R3ARA121MF61G
220 F61 22 2,570 APXS6R3ARA221MF61G
390 H70 22 3,220 APXS6R3ARA391MH70G
33 E61 70 1,100 APXS100ARA330ME61G
68 E61 30 1,970 APXS100ARA680ME61G
10
120 F61 27 2,320 APXS100ARA121MF61G
150 H70 30 2,760 APXS100ARA151MH70G
22 E61 90 1,060 APXS160ARA220ME61G
39 E61 35 1,820 APXS160ARA390ME61G
39 F61 37 2,050 APXS160ARA390MF61G
16
68 F61 30 2,200 APXS160ARA680MF61G
82 H70 30 2,760 APXS160ARA820MH70G
120 H70 27 2,900 APXS160ARA121MH70G
(2/2) CAT. No. E1001K