Text preview for : hfe_creek_4240_en.pdf part of CREEK hfe creek 4240 en . Rare and Ancient Equipment CREEK 4240 hfe_creek_4240_en.pdf
Back to : hfe_creek_4240_en.pdf | Home
AUDIO LIMITED
OPERATING INSTRUCTIONS FOR THE CREEK 4240
( Line and Phono Input Version )
Thank you for purchasing the 4240 amplifier. You are now in possession of a State of the Art Integrated
Amplifier. The functions and operation of the 4240 are extremely simple. However, the following notes are
provided to explain all aspects of its design and use.
MAINS CONNECTION
When unpacking the amplifier please keep the packing material in a safe place for possible future use. In
the pack there is a separate mains cable suitable for connecting to the mains supply in the country of use.
The IEC socket end of the cable should be firmly inserted into the connector on the rear panel marked
"Mains Input". Remember, do not overload the mains wall socket with too many plugs or adapters. The high
quality performance of the amplifier will be impaired if the electrical supply to it is in poor condition. If in
doubt, consult a qualified electrician or your dealer. The "Mains Input" connection is also fitted with a fuse,
specifically suited to the supply voltage of the country of use. The correct value is clearly marked on the rear
panel next to the Mains Input. Should it be necessary to replace the fuse, ensure that you use the same
type as specified on the rear panel. i.e. 5 x 20mm cartridge type 1