Text preview for : Panel_SAMSUNG_SDI_S50HW-YB06_0_[DS].pdf part of . Various Panel SAMSUNG SDI S50HW-YB06 0 [DS] . Various LCD Panels Panel_SAMSUNG_SDI_S50HW-YB06_0_[DS].pdf
Back to : Panel_SAMSUNG_SDI_S50HW-Y | Home
Global LCD Panel Exchange Center www.panelook.com
CUSTOMER'S SPECIFICATIONS
(Approval)
126.9cm (50 Inch) Wide Plasma Display Module
MODEL : S50HW-YB06
(NTSC/PAL)
* This specification will be approved by both and Samsung SDI Co.,Ltd.
* Please return one of this specification with your signature for approval.
Proposed by: Approved by:
Signature Signature .
Manager. Lee Bong Kyu
PDP Quality Innovation Team
PDP Business Division,
Samsung SDI Co., Ltd
SAMSUNG SDI CO.,LTD.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
Revision History
No Date Description Of Changes Rev. no Approval
1 2010-08-17 Newly Established 00 Approval
SAMSUNG SDI - 2/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
TABLE OF CONTENTS
1. DESCRIPTION ......................................................................................................................... 5
2. FEATURES ............................................................................................................................... 5
3. PRODUCT NAME AND MODEL NUMBER ....................................................................... 5
4. FUNCTION OUTLINE ............................................................................................................ 5
5. BLOCK DIAGRAM ................................................................................................................. 6
6. DISPLAY CHARACTERISTICS ........................................................................................... 7
6.1 DISPLAY PERFORMANCE ........................................................................................................ 7
6.2 DISPLAY CELL ARRANGEMENT .............................................................................................. 8
6.3 LUMINANCE MEASUREMENT CONDITION ............................................................................... 9
6.4 CONTRAST MEASUREMENT CONDITION ............................................................................... 10
6.5 DISPLAY CELL DEFECT SPECIFICATION ................................................................................ 11
6.6 UNIFORMITY SPECIFICATIONS .............................................................................................. 12
6.7 POWER CONSUMPTION .......................................................................................................... 13
6.8 GAMMA CHARACTERISTICS .................................................................................................. 16
6.9 FILM FILTER.......................................................................................................................... 17
6.10 WHITE BLANCE .................................................................................................................. 19
7. SOUND PRESSURE LEVEL SPECIFICATION .............................................................. 20
7.1 MEASURING CONDITION ...................................................................................................... 20
7.2 SOUND PRESSURE LEVEL ..................................................................................................... 20
8. MECHANICAL CHARACTERISTICS .............................................................................. 21
8.1 MECHANICAL SPECIFICATIONS ............................................................................................. 21
8.2 MECHANICAL CHARACTERISTICS ......................................................................................... 21
9. ENVIRONMENTAL CONDITIONS ................................................................................... 22
9.1 OPERATIONAL ENVIRONMENTAL CONDITION ....................................................................... 22
9.2 STORAGE ENVIRONMENTAL CONDITION *1 .......................................................................... 22
9.3 PANEL SURFACE CONDITION ............................................................................................... 23
10. INTERFACE SIGNAL SPECIFICATIONS ...................................................................... 24
10.1 CONFIGURATION CONTEXT ................................................................................................ 24
10.2 INTERFACE FUNCTION SPECIFICATIONS (INPUT DATA AND DISPLAY PROCESSING) .............. 25
10.3 INPUT SIGNAL DEFINITION.................................................................................................. 25
10.4 LVDS SIGNAL DEFINITION AND FUNCTION ........................................................................ 26
10.5 LVDS SIGNAL PIN ASSIGNMENT........................................................................................ 27
10.6 VIDEO SIGNAL DEFINITION AND FUNCTION ........................................................................ 28
10.7 ELECTRICAL CONDITION OF INTERFACE SIGNAL................................................................. 29
10.8 VIDEO SIGNAL INTERFACE TIMING CONDITIONS ................................................................ 30
10.9 LVDS INTERFACE TIMING CONDITIONS ............................................................................. 31
10.10 LVDS CONNECTION SPECIFICATIONS .............................................................................. 32
10.11 I2C INTERFACE CONDITIONS ............................................................................................ 33
SAMSUNG SDI - 3/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
10.12 CONNECTOR SPECIFICATIONS ........................................................................................... 37
10.13.MODE CHANGE................................................................................................................. 38
11.ADDRESS MAP ..................................................................................................................... 39
12. INPUT POWER VOLTAGE SPECIFICATIONS ............................................................ 40
12.1 ELECTRICAL CHARACTERISTIC OVERVIEW ......................................................................... 40
12.2 PIN ASSIGNMENT OF CONNECTORS FOR POWER SUPPLY ..................................................... 40
12.3 POWER APPLYING SEQUENCE............................................................................................. 41
13. MECHANICAL DIMENSION DRAWING....................................................................... 46
13.1 FRONT SIDE ........................................................................................................................ 46
13.2 REAR SIDE ......................................................................................................................... 46
14. LABEL ................................................................................................................................... 47
14.1 LABEL TYPE ....................................................................................................................... 47
14.2 LABEL LOCATION ............................................................................................................... 48
15. PACKING .............................................................................................................................. 49
15.1 PACKING DIMENSION AND PARTS LIST ............................................................................... 49
15.2 PACKING ASSEMBLY DRAWING ......................................................................................... 49
16. RELIABLITY ....................................................................................................................... 50
16.1 MTBF VALUE .................................................................................................................... 50
16.2 EXPECTED SERVICE LIFE .................................................................................................... 50
16.3 DISCLAIMER ...................................................................................................................... 50
16.4 CERTIFICATE ...................................................................................................................... 50
17. WARNING / CAUTION / NOTICE ................................................................................... 51
17.1 WARNING ........................................................................................................................... 51
17.2 CAUTION ............................................................................................................................ 53
17.3 NOTICE............................................................................................................................... 54
SAMSUNG SDI - 4/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
1. DESCRIPTION
The S50HW-YB06 is a 50-inch wide full color plasma display Module with a resolution of
1365(H) 768(V) pixels. The display module includes the Plasma Display Panel,
the Panel Driving Electronics, the Logic Control Board.
2. FEATURES
x Wide aspect ratio(16:9) 50 inch diagonal display screen. The display area is 1105.65mm
wide and 622.08mm high.
x Slim and light weight. The display Module is 49.38mm in depth and weight only approx.
16.0kg(M1F).
x 1073.7 million colors(10Bit), or 16.77 million colors(8Bit) combination of R,G and B
digital data.(According to LVDS input selection)
x High Luminance, High contrast, Wide viewing angle. The screen has a white peak
Luminance of typical 675 cd/ (In Film transmissivity 45.0%, NTSC),
typical 630 cd/ (In Film transmissivity 45.0%, PAL)
contrast of typical 10,000:1(NTSC),5,000:1(PAL) .
And a viewing angle of greater than 160 comparable to that achieved
3. PRODUCT NAME AND MODEL NUMBER
x Product name : 50 inch Full Color Plasma Display Module1
(abbreviation : PDP Module)
x Model number : S50HW-YB06(Project name : U2P)
x Product Code : PL50HF010A
4. FUNCTION OUTLINE
x The plasma display module has an APC(Automatic Power Control) function which
restricts power consumption within the certain value with regard to each display load ratio.
x The plasma display module is operated by following digital video signals; Vertical
synchronous signal, Horizontal synchronous signal, Enable signal and 8~10bit data
signals of each R, G and B color. All signals are based on LVDS level.
x The plasma display module is operated at /60Hz/50Hz frame rate. An external frame rate
conversion is required in order to display the other formats.
x The plasma display module requires several types of input power voltages ; voltage for
logic IC, voltage for Gate Driver, voltage for Sustain and voltage for Address.
x The plasma display module is operated at progressive signal only.
An external progressive scan conversion is required in order to display the other formats.
SAMSUNG SDI - 5/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
5. BLOCK DIAGRAM
LVDS SIGNAL
LOGIC CONTROLLER
LVDS I/F CONTROLLER
DATA PROCESSOR
MEMORY CONTROLLER DRAM
DISPLAY DATA
DRIVING TIMING
DRIVING CIRCUIT AND PANEL
SUSTAIN PULSE
SCAN PULSE
DRIVER
DRIVER
PDP
1365 768 Pixels
DATA DRIVER
DRIVING VOLTAGE
POWER SUPPLY UNIT
Figure-1. Block Diagram of PDP module
SAMSUNG SDI - 6/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6. DISPLAY CHARACTERISTICS
6.1 Display Performance
No Item Rating
1 Display Pixels Horizontal 1365 Vertical 768 pixels
(1 pixel = 1 R,G,B cells)
2 Display Cells Horizontal 4,095 Vertical 768 cells
3 Pixel Pitch Horizontal 810 Vertical 810
R Horizontal 270 Vertical 810
4 Cell Size G Horizontal 270 Vertical 810
B Horizontal 270 Vertical 810
5 Pixel Type R, G, B Non stripe (refer to Figure-2)
6 Effective Display Horizontal 1105.65 Vertical 622.08
Size [ 43.51 inch 24.49 inch ]
7 Number of color 1073.7 million colors (10Bit)
16.77 million colors ( 8Bit)
Peak Luminance *1 NTSC: Typical 624 cd/ , Minimum 490 cd/
8 (peak algorithm on) PAL : Typical 582 cd/ , Minimum 450 cd/
Contrast Ratio *2 60Hz : Typical 10,000:1,Minimum 6,000:1
9 (in dark room,
peak algorithm on)
50Hz : Typical 5,000:1,Minimum 3,000:1
10 (30% Brightness
Load Brightness) Typical 157cd/ , Minimum 140 cd/
11 Viewing Angle *3 Over 160
(Note)
* 1. Luminance and Color Coordinates are the values that were measured with Full load
ratio white pattern. The condition for measurement is shown in Figure-3.
* 2. Contrast Ratio is calculated from the display Luminance and the non-display
Luminance value. Display condition is shown in Figure-4.
* 3. Viewing angle is a critical angle at which the Luminance is reduced to 50% to the
Luminance perpendicular to the PDP Module. The Luminance is measured by a non-
contact luminance meter MINOLTA CA-210Plus.
SAMSUNG SDI - 7/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.2 Display Cell Arrangement
1st 2nd 3rd 1363th 1364th 1365th
Pixel Pixel Pixel Pixel Pixel Pixel
Column Column Column Column Column Column
Pixel Pitch (Width): 0.810 mm
1st
Pixel Pixel
Row Pitch
2nd
Pixel
Row
767th
Pixel
Row
768th
Pixel
Row
Figure-2.Display Cell Arrangement
SAMSUNG SDI - 8/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.3 Luminance Measurement Condition
(1) Display Pattern
Effective Display Area
345
Effective Display Area
78
345
614 138 614
Unit : Pixels(=lines)
marked area : White display area by maximum gradation setting
marked area : Black color (non-display area)
Figure-3. Display Pattern for Brightness & Contrast Ratio Measurement
(2) Display Area ratio : 1% white window
(3) Vsync : 16.7ms
(4) Measuring equipment : MINOLTA CA-100Plus
Pattern Generator(VG-828, LVDS Output).
(5) Ambient Temperature : Room Temperature
(6) Ambient Luminance : Dark Room (<2 lux)
[ Note]
1. Measurement is done within 30 seconds after Power On. The temperature of panel
before measurement is room temperature (25 ).
2. Measurement is done within 3 seconds after Display Pattern(
SAMSUNG SDI - 9/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.4 Contrast Measurement Condition
(1) Measuring point
Figure-4. Measurement point
(2) Vsync : 16.7 ms
(3) Measuring Equipment : MINOLTA CA-100Plus
Pattern Generator(VG-828, LVDS Output).
(4) Contrast Calculation formula
Luminance of 1% white window Area at the center of the screen
Contrast ratio =
Luminance of Black Area *1
Note
Note
1. For mass production test purposes, it is recommended to measure just 1 point, P1 of
Figure 4 on display pattern of Figure 3.
2. Measuring point _P1 is that minimum luminance point from among effective display
area
(5) Ambient Light : Dark Room (<2 lux)
SAMSUNG SDI - 10/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.5 Display Cell Defect Specification
In some cases, a panel may have defective cells that cannot be controlled.
These defective cells can be categorized into three types;
(1) Non-lighting cell defect : defect in which the cell is always off
(2) Non-extinguishing cell defect : defect in which the cell is always on.
(3) Flickering cell defect : defect in which the cell is flickering.
(4) High intensity cell defect : defect in which the cell is brighter than other cells
(5) Test Pattern : Full White, Full Red, Full Green and Full Blue with 1024 gray level.
The display cell defect specifications define the allowed limits for display cell defects and
are used as the criteria in determining whether a panel should be shipped.
Figure-5. Measurement Area
Specification
Item
Number of cell defects Distance between cell defects
Zone A: 4 and less
Non-lighting
Zone B: 12 and less
cell defect
A+B Total : 16 and less
Non- Zone A: 2 Regardless of A and B zone,
extinguishing Zone B: 3 and less
cell defect Total : 3 and less 1 Cell Defect in an area of 20mm*20mm
Flickering Zone A: 1
cell defect Zone B: 2 and less
Zone A : 1
3 Continuous Regardless of A and B zone,
Zone B : 3
Cell 1 Cell Defect in an area of 20mm*20mm
Total : 4
SAMSUNG SDI - 11/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.6 Uniformity Specifications
The color-PDP uses ultraviolet light produced by gas discharge to illuminate phosphor.
Uneven phosphor coating and inconsistent discharge characteristics cause slight difference
in brightness among the sections in a panel.
Item Definition Specification
The brightness is measured at 9 points (A1~A9 of
Full white
Fig-6) on full white pattern. 20% and less
brightness
The full white brightness variation as then calculated
variation
from the following equations.
Max x x Min
Equation u 100% u 100%
x & x
The brightness variation specifications define the allowed limits for brightness differences
and the criteria in determining whether a panel is shipped.
W : Effective Display Area
A1 A2 A3 H * 0.1
H : Effective Display Area
A4 A5 A6
A7 A8 A9
H * 0.1
W * 0.1 W * 0.1
Figure-6. Measuring areas
SAMSUNG SDI - 12/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.7 Power consumption
6.7.1 APC (Automatic Power Control) Function
The PDP has an APC (Automatic Power Control) function for the panel driver power source.
When the total display load ratio exceeds approximately 10%, total power consumption is
limited within a specified level (=Lower Power Limit) by APC function.
The operation behavior of APC function is called as SLOW-APC. When the display load-
ratio changes from low to high value, the power-consumption rises instantly to "Upper
Power Limit" and gradually decreases until it reaches to the "Lower Power Limit."
[Note] Number of steps may vary as a function of the load ratio.
Power
Upper Power
Limit
Power
Load-ratio
Time for transition between 2 setps = 8 frames
Lower Power (This could be controlled by R HOLD TIME)
Limit
t
Figure 7. Slow APC Behavior
6.7.2 Brightness and Power Mode Control
This PDP module offsers two methods for Brightness and Power mode control.
One is APCO(APC Offset) for Peak-Brightness control, and the others are PUG and PLG
for power mode control. APCO, PUG and PLG are registers controllable through I2C
communication from image B'd. For a detailed address and data bits of these registers ,
refer to the Chapter 11. Address Map.
(1) Peak-Brightness Control( APCO)
- controls the max.sustain number
- APCO variable range : 0010h~01FFh (cf. 00C8h~01F4h @3D Mode)
Sustain
number
Max. Sustain
Normal Bright Mode (APCO=0010h)
2/3 Peak-bright Mode (APCO=00F0h)
1/3 Peak-bright Mode (APCO=1A4h)
Min. Sustain
Figure-8. APCO Behavior
0 Cmax load ratio 100%
SAMSUNG SDI - 13/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
(2) ASLG ( Power-Mode Control using ASL gain function)
- ASLG variable range : 80~FFh
- Maximum available power decrease by increasing ASLG above 80h(NTSC)
Sustain
number ASLG < ASLG'
Max. Sustain ASLG' = 60h@NTSC(50h@PAL)
ASLG > ASLG' High-Power Mode
Normal Mode
load at F/W pattern Power-Save Mode
Min. Sustain
Saturated at Min. Sustain
0 Load-ratio 100%
Figure-9. ASLG Behavior
(3) Power-Mode Control (PLG)
- PLG(Power Lower Gain control register)
- Variable range : 00h ~ FFh(Tentative) , Default Value : 80h
- PLG is for lower power level.
- PLG value : smaller than the default in order to make less power consumption.
Max(Guarantee Stress) : 280W
Typical : 265W
Figure-10. APCL Behavior(PLG Adjust,F/W Pattern)
SAMSUNG SDI - 14/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
(5) SAPC_Timer
The module is equipped with the Sustain APC Timer function to reduce the amount of
image retention. If the input image is not varying for at least 30sec, the fuction starts to
operate and reduce the intial APC level one step down to a predefined target level in
every three seconds. The fuction is immediately turned off when the input image starts
varying.
SAMSUNG SDI - 15/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.8 Gamma characteristics
6.8.1 Basis of Gamma Curve
This PDP module is normally applied to the 2.2 gamma curve (refer to Figure-12)
But this specification could be modified on the request of the customer.
Figure-12. Default Gamma Curve
SAMSUNG SDI - 16/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.9 Film filter
6.9.1 Structure of the PDP FF
Hard coating layer
Color PSA
Film transmissivity 45%
6.9.2 Characteristics of the PDP FF
(1) Attached with a Hard coating film on the View side..
(2) Attached with a Near Infrared (NIR) cut off function in the Color PSA to shield them..
6.9.3 Dimension Specifications
SAMSUNG SDI - 17/60 - Rev.01 10/1/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SAMSUNG SDI Corporation Plasma Display Panel
6.9.4 Film Filter Defect specifications
Items Specification
Allow Defects
Point Defects Size (mm)
Area A Area B
<0.5
Point unlimited
0.5<1.0
Defects
1.01.5 2 3
1.5<