Text preview for : sra.pdf part of UCC sra . Electronic Components Datasheets Passive components capacitors Datasheets UCC sra.pdf



Back to : sra.pdf | Home

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 7mm height, 85C


SRG


@7mm height Downsized
@Endurance : 1,000 hours at 85C
@Non solvent resistant type SRA
@RoHS Compliant

?SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +85C

Rated Voltage Range 4 to 63Vdc
Capacitance Tolerance P20% (M) (at 20C, 120Hz)
Leakage Current I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes)
Dissipation Factor Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V
(tane) tanE (Max.) 0.35 0.24 0.20 0.16 0.14 0.12 0.10 0.08 (at 20C, 120Hz)
Low Temperature Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V
Characteristics Z(-25C)/Z(+20C) 4 4 3 2 2 2 2 2
(Max. Impedance Ratio)
Z(-40C)/Z(+20C) 10 10 8 6 4 3 3 3 (at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 1,000 hours
at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 85C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value

?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET : Black)
FP0.5




FP0.5




fD 4 5 6.3 8
Fd




fd 0.45 0.45 0.45 0.45
F 1.5 2.0 2.5 3.5
FD'




or fD' FD+0.5max.
L' L+1.0max.
L' 15min. 4min. Gas escape end seal


?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

E SRA AAA E AA AAA M AAA D
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 1.0MF:1R0,100MF:101)
Lead forming