Text preview for : 1SS355.pdf part of Various 1SS355 . Electronic Components Datasheets Various 1SS355.pdf



Back to : 1SS355.pdf | Home

1SS355

FAST SWITCHING DIODE
VOLTAGE 80 Volts CURRENT 150 mAmperes


FEATURES
* Flat Lead SOD-323 Small Outline Plastic Package
* Surface Device Type Mounting
* Fast Switching Device (Trr<4.0nS)
* Moisture Sensitivity Level 1
* General Purpose Diodes
* Clip Bonding Construction,Good Thermal Capability
SOD-323
* Pb Free Version and ROHS Compliant
* Matte Tin(Sn) Lead Finish with Nicke(Ni) Underplate
* Band Indicates Cathode
.071 (1.8)
.063 (1.6)


.016 (0.40) .053 (1.35)

.010 (0.25) .045 (1.15)




.043 (1.10)
.010 (0.25)
.031 (0.80)
.002 (0.05)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.106 (2.7)
Ratings at 25 o C ambient temperature unless otherwise specified. .091 (2.3)
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

Dimensions in inches and (millimeters)




Absolute Maximum Ratings (@ TA=25 OC unless otherwise noted)
RATINGS SYMBOL 1SS355 UNITS
Reverse Voltage VR 80 Volts
Repetitive Peak Reverse Voltage VRM 90 Volts
Continuous Forward Current IO 150 mAmps
Forward Current I FM 0.25 Amps
Repetitive Peak Forward Current I FRM 0.5 Amps
Power Dissipation PD 200 mW
O
Operating Junction Temperature TJ +150 C
O
Storage Temperature Range TSTG -65 to + 150 C
These ratings are limiting values above which the serviceability of the diode may be impaired.


ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
1SS355
CHARACTERISTICS SYMBOL UNITS
Min. Max.
Forward Voltage @IF=100mA VF 1.2 Volts
Reverse Leakage Current @VR=80V IR 100 nAmps
Breakdown Voltage @IR=100uA VR 80 Volts
Reverse Recovery Time (I F=10mA,V R=6V,R L=100W) Trr 4 nS
Capacitance (V R=0.5V,f=1MHz) C 4 pF
VB 2007-9
RATING AND CHARACTERISTICS CURVES ( 1SS355 )




CAPACITANCE BETWEEN TERMINALS, (pF)
100 10 10
O
TA=125 C f= 1MHz
FORWARD CURRENT, (mA)




REVERSE CURRENT, (uA)
O
TA=125 C 1 O
TA= 75 C
10
TA=75OC 0.1 O
TA=25OC TA= 25 C
1
0.01 TA= -25 C
O
O
1 TA=-25 C

0.001


1.0 0.0001 0.1
0 0.2 0.4 0.6 0.8 1.0 1.2 0 20 40 60 80 100 120 0 10 20 30
FORWARD VOLTAGE, (mV) REVERSE VOLTAGE, (V) REVERSE VOLTAGE, (V)
FIG.1 VF-IF CHARACTERISTICS FIG.2 VR-IR CHARACTERISTICS FIG.3 VR-Ct CHARACTERISTICS




TRANSIENT THAERMAL IMPEDANCE, (OC/W)
PEAK SURGE FORWARD CURRENT, (A)




PEAK SURGE FORWARD CURRENT, (A)




20
100 1000
8.3mS Single Half Sine-Wave 8.3mS Single Half Sine-Wave Rth (j-a)
(JEDEC Method) (JEDEC Method)
15
100
Rth (j-c)
10 10 Mounted on epoxy board

10 IM=1mA IF=10mA
5
1mS time

300uS
0 1 1
0.1 1 10 100 0.1 1 10 100 0.001 0.01 0.1 1 10 100 1000

NUMBER OF CYCLES TIME, (nS) TIME, (S)
FIG.4 IFSM-CYCLE CHARACTERISTICS FIG.5 IFSM-t CHARACTERISTICS FIG.6 Rth-t CHARACTERISTICS
AVERAGE RECTIFIER FORWARD CURRENT, (A)




AVERAGE RECTIFIER FORWARD CURRENT, (A)
REVERSE POWER DISSIPATION, (W)




0.001 0.20 0.20
DC DC

0.15 0.15
D= 1/2
D= 1/2
Sin(=180)

0.0005 0.10 0.10
Sin(=180)
D= 1/2
DC 0A IO 0A IO
Sin(=180) 0.05 0.05
0V VR 0V VR
t t D= t/T
D= t/T
VR= 40V VR= 40V
T Tj= 125OC T Tj= 125OC
0 0 0
0 20 40 60 80 100 120 0 25 50 75 100 125 0 25 50 75 100 125
REVERSE VOLTAGE, (V) AMBIENT TEMPERATURE, (OC) CASE TEMPERATURE, (OC)
FIG.7 VR-PR CHARACTERISTICS FIG.8 IO-TA CHARACTERISTICS FIG.9 IO-TC CHARACTERISTICS
DISCLAIMER NOTICE




Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.


Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.