Text preview for : Sharp AR-M350, 450 Service Manual.pdf part of Sharp AR-M350 LASER PRINTER
AR-M350, AR-M450 Service Manual
Back to : Sharp AR-M350, 450 Servic | Home
CODE : 00ZARM350/A1E
LASER PRINTER
MODEL
OPTIONS
AR-M350 AR-M450
AR-EF1 / AR-M11 / AR-RK1
CONTENTS
[ 1 ] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 [ 2 ] CONFIGURATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1 [ 3 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1 [ 4 ] CONSUMABLE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1 [ 5 ] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . 5 - 1 [ 6 ] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 6 - 1 [ 7 ] DISASSEMBLY AND ASSEMBLY, MAINTENANCE . . . . . . . . . 7 - 1 [ 8 ] MACHINE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1 [ 9 ] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1 [10] SIMULATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1 [11] TROUBLE CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1 [12] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 1
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used for after sales service only. The contents are subject to change without notice.
CAUTION
Cautions on laser
Wave length Pulse times 785 nm +10 nm -15 nm North America: 35 cpm model: (4.1 µs ± 4.1 ns)/7 mm 45 cpm model: (5.7 µs ± 5.7 ns)/7 mm Europe: 35 cpm model: (3.8 µs ± 3.8 ns)/7 mm 45 cpm model: (4.4 µs ± 4.4 ns)/7 mm 0.2 mW - 0.4 mW At the production line, the output power of the scanner unit is adjusted to 0.4 MILLIWATT PLUS 8 % and is maintained constant by the operation of the Automatic Power Control (APC). Caution This product contains a low power laser device. To ensure safety do not remove any cover or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
Output power
For North America:
SAFETY PRECAUTIONS This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the equipment does not produce hazardous laser radiation. For your safety, observe the precautions below.
q q
For Europe:
CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT
Do not remove the cabinet, operation panel or any other covers. The equipment's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots.
Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
CAUTION INVISIBLE LASER RADIATION WHEN OPEN INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VORSICHT UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UND SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT. NICHT DEM STRAHL AUSSETZEN. ADVARSEL USYNLIG LASERSTRÅLNING VED ÅBNING, NÅR SIKKERHEDSBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING. VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
Laserstrahl
CAUTION VORSICHT ADVARSEL ADVERSEL VARNING VARO!
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UND SICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN. USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING. USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN.
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRRAR ÄR URKOPPLADE. STRÅLEN ÄR FARLIG. BETRAKTA EJ STRÅLEN.
CLASS 1 LASER PRODUCT
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTÖNT LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
LASER KLASSE 1
VARNING OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
CONTENTS
[1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 [2] CONFIGURATION 1. System Configurations . . . . . . . . . . . . . . . . . . . . . . . . . .2-1 2. Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1 3. List of combination of peripheral devices . . . . . . . . . . . .2-2 [3] SPECIFICATIONS 1. Basic Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1 2. Specific Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 3. B/W Scanner Module (DSPF) . . . . . . . . . . . . . . . . . . . .3-5 4. Rack for Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6 [4] CONSUMABLE PARTS 1. Supply system table . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1 2. Production number identification . . . . . . . . . . . . . . . . . .4-5 3. Environmental conditions . . . . . . . . . . . . . . . . . . . . . . . .4-5 [5] EXTERNAL VIEWS AND INTERNAL STRUCTURES 1. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1 2. Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2 3. Touch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3 4. Cross sectional view . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 5. Switch, Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 6. PWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7 7. Motor, Clutch, Solenoid . . . . . . . . . . . . . . . . . . . . . . . . .5-7 [6] UNPACKING AND INSTALLATION 1. Installing procedure flowchart . . . . . . . . . . . . . . . . . . . .6-1 2. Note for installation place . . . . . . . . . . . . . . . . . . . . . . . .6-2 3. Unpacking procedure . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2 4. Machine installing procedure . . . . . . . . . . . . . . . . . . . . .6-2 5. AR-EF1 / AR-RK1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6 6. Automatic developer adjustment . . . . . . . . . . . . . . . . . .6-8 7. Adjustment of distortion . . . . . . . . . . . . . . . . . . . . . . . . .6-8 8. AR-M11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9
[7] DISASSEMBLY AND ASSEMBLY, MAINTENANCE 1. Self print of set values. . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 2. Maintenance System Table . . . . . . . . . . . . . . . . . . . . . . 7-1 3. Disassembly and assembly . . . . . . . . . . . . . . . . . . . . . 7-4 [8] MACHINE OPERATION 1. Acceptable originals . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 2. Standard original setting orientation . . . . . . . . . . . . . . . 8-1 3. Automatic copy image rotation - rotation copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 4. Adjustment values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 5. Key operator program . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 [9] ADJUSTMENTS 1. Process section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 2. Engine section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 3. Scanner section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 [10] SIMULATIONS 1. Entering the simulation mode . . . . . . . . . . . . . . . . . . . . 10-1 2. Switching the simulation mode . . . . . . . . . . . . . . . . . . . 10-1 3. Canceling the simulation mode. . . . . . . . . . . . . . . . . . . 10-1 4. Simulation list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 5. Details of simulations . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9 [11] TROUBLE CODES 1. Trouble codes list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1 2. Details of trouble codes . . . . . . . . . . . . . . . . . . . . . . . . 11-2 3. Network communication error . . . . . . . . . . . . . . . . . . . . 11-10 4. Fatal / Non-Fatal Error Table . . . . . . . . . . . . . . . . . . . . . 11-11 [12] ELECTRICAL SECTION 1. Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1 2. Circuit Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2
[1] PRODUCT OUTLINE
* For the items which are not specified in this Service Manual, refer to the AR-P350/P450 Service Manual.
A. Scanner unit with duplex SPF (AR-EF1)
This unit is an option scanner unit for the laser printer AR-P350/P450/ M350/M450. By installing this unit to the above laser printer (installation of the AR-RK1 is also required), the printer can work as a digital multi-function device with the following functions: 1) Copy function 2) Network scanner function (The AR-NS2, network scanner kit, is required.) 3) Fax function (The AR-FX5, fax extending kit, is required.)
B. Multi-function controller (AR-M11)
This unit is a multi-function controller for the laser printer AR-P350/P450. When installing the AR-EF1 to the above laser printer, the printer controller must be replaced with this multi-function controller.
C. Scanner rack (AR-RK1)
This rack is required when installing the scanner unit (AR-EF1) with duplex DSPF to the laser printer AR-P350/P450/M350/M450. To install this rack, the machine must be equipped with the large capacity paper feed desk (AR-D13) or the 3 stage paper feed desk (AR-D14).
D. AR-M350/M450
This machine is a version of the AR-P350/P450, and is equipped with the multi-function controller as standard equipments. To install this model, the large capacity paper feed desk (AR-D13) or the 3 stage paper feed desk (AR-D14) is required.
AR-M350 PRODUCT OUTLINE 1-1
[2] CONFIGURATION
1.System Configurations
Exit tray (AR-TE3 or AR-DU4 Standard) B/W scanner module/DSPF(AR-EF1)
Duplex module/bypass tray(AR-DU4)
Upper exit tray extension (AR-TE4)
Finisher (AR-FN6)
Duplex module (AR-DU3)
Saddle stitch finisher (AR-FN7)
Mail-bin stacker (AR-MS1)
Multi purpose drawer (AR-MU1) Stand/3 x 500 sheet paper drawer (AR-D14)
Simultaneous installation not allowed
Stand/MPD & 2000 sheet paper drawer (AR-D13)
2. Standard
Category Model Name Other options required for the installation/mounting. (Options must be ordered separately.) Remarks Printer model (35ppm) AR-P350 ·Multi Purpose Drawer (AR-MU1), or Stand/MPD&2000 Sheet Paper Drawer (AR-D13), or Three Printer model (45ppm) AR-P450 paper drawer stand (AR-D14) ·Power Supply Unit (AR-DC1) is required for Stand/MPD&2000 Sheet Paper Drawer (AR-D13) and Three paper drawer stand (AR-D14) MFP model (35ppm) MFP model (45ppm) AR-M350 ·B/W Scanner module/DSPF (AR-EF1) (Standard) AR-M450 ·Scanner Rack(AR-RK1) (Standard) ·Stand/MPD&2000 sheet paper drawer (AR-D13) or Three paper drawer stand (AR-D14) ·Power supply unit (AR-DC1)
AR-M350 CONFIGURATION 2-1
3. List of combination of peripheral devices
As shown in the table below, some other peripheral devices ( B ) may be needed for installation of a peripheral device ( A ) and some peripheral devices cannot be installed together.
B
Stand/3 x 500 sheet paper drawer Multi-function controller board B/W scanner module/DSPF Network scanner expansion kit Duplex module/bypass tray
Stand/MPD & 2000 sheet
Upper exit tray extension
Facsimile expansion kit Fax memory (8 MB)
Multi purpose drawer
Saddle stitch finisher
PS3 expansion kit
Power supply unit
Print server card
Mail-bin stacker
Related for scanner feature B/W scanner module/DSPF *3 AR-EF1 *3 AR-RK1 Scanner rack Related for paper feed unit Multi purpose drawer Stand/3 x 500 sheet paper drawer Stand/MPD & 2000 sheet paper drawer AR-MU1 AR-D14 AR-D13
*
1
*1 *1
Duplex module/bypass tray AR-DU4 Duplex module Output units Saddle stitch finisher Finisher AR-FN7 AR-FN6 AR-MS1 *4 AR-TE3 AR-TE4 AR-PN1 AR-DU3
*1 *1
*2 *2
*1 *1 *1 *1 *1
A
Mail-bin stacker Exit tray Upper exit tray extension Punch unit Related for extension of functions and others PS3 expansion kit Network scanner expansion kit Facsimile expansion kit Fax memory (8 MB) Power supply unit Hard disk drive
AR-PK1 AR-NS2 AR-FX5 AR-MM9 AR-DC1 AR-HD3 *1 *1 *1 *1 *1 *1 *1 *1
Multi-function controller *3 AR-M11 board Print server card AR-NC5J
= Must be installed together. *1 = Any of the units must be installed together. 2 * = Must be installed for installation of the stand/3 x 500 sheet paper drawer or the stand/MPD & 2000 sheet paper drawer. = Cannot be installed together. *3 = Standard *4 = AR-DU4 Standard
AR-M350 CONFIGURATION 2-2
Hard disk drive
Duplex module
Scanner rack
Punch unit
Exit tray
Finisher
[3] SPECIFICATIONS
1. Basic Specification
A. Base Engine (AR-M350/M450)
(1) Form
AR-M350/AR-M450 Console type
(in mm) Paper size A3 B4 A4 B5 A5 Japanese postcard AR-M450 45ppm 45ppm 45ppm 22ppm 20ppm Ledger Legal Foolscap Letter Executive Invoice Com-10(envelope) C5(envelope) Monarch(envelope) DL(envelope) ISO B5(envelope) A 297 257 210 182 148 100 279 216 216 216 184 140 105 162 98 110 176 B 420 364 297 257 210 148 432 356 330 279 267 216 241 229 191 220 250 C 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 D 289 242 202 168 140 92 271 208 208 208 183 132 97 154 90 102 168 E 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
(2) Engine speed
Paper size A4, 8.5" x 11" A5R/5.5" x 8.5"R B5 B4/8.5" x 14 A3/11" x 17" AR-M350 35ppm 35ppm 35ppm 20ppm 17ppm
(3) Engine composition
Photoconductor type Record method Development method Charge method Transfer method Cleaning method Fusing method Used toner disposal Resolution Smoothing Gradation OPC (diameter of photoconductor : ø30mm) Electrophotograph (laser) Dry-type dual-component magnetic brush development Charged saw-tooth method Transfer roller Counter blade Heat roller Toner recycling system
(6) Warm-up
Warm-up time Pre-heat requirement Jam recovery time less than 80 seconds Required Target: about 30 seconds (Under standard condition of 60 seconds left after side cover opening, polygon motor halt) 100V system 200V system 100-127V 220-240V 50/60Hz 50/60Hz
(4) Engine resolution
Write :600dpi Write :1200dpi equivalent Write :2 levels
(7) Power source
Voltage Frequency Power cord
(5) Printable area
The print area of this product is shown below.
E
(8) Power consumption
AR-M350 AR-M450 1350W 1200W
C
C
Max. Power consump. Average waiting mode
1350W 1200W
(9) Energy Star benchmark
AR-M350 AR-M450 75W 60min Low power mode Transition time to Low power mode 40W 60min
B
(10) Noise
AR-M350 At working At waiting mode * less than 6.7B less than 4.8B AR-M450 less than 6.7B less than 4.8B
Showing noise benchmark in each model as a whole system. 428x552x469 (Only main unit) (mm) 16.9"x21.7"x18.5" 963x685 (mm) *1 25.7"x22.3" Approx.39kg (Only main unit) Approx.99kg *1
E
D A Paper size Printable area
(11) Dimensions
External dimensions (WxDxH) Occupied space dimensions (WxD) Weight *1:
If a printer driver for Windows or Macintosh is used for printing, the printable area will be smaller. The actual printable area depends on the printer driver to be used.
with B/W scanner module/DSPF, Scanner rack, Large capacity paper feed desk, Power supply unit and Upper exit tray extension
AR-M350 SPECIFICATIONS 3-1
B. Document Feeding Equipment
(1) One-drawer tray (included in the base engine)
Paper feed method Sizes to be fed Paper capacity Media available for paper feeding Paper type Paper size switching One-drawer tray A4, B5, 8.5" x 11" 500 sheets (at 80g/m²) Plain paper 60 - 105g/m², 16 - 28lbs Plain, recycled, pre-printed, pre-punched, color, letter head To be switched by user (paper size to be entered from the operation panel). Not provided Provided (paper empty and 3 steps) 100V system 200V system 8.5" x 11" A4 Provided
(4) Print Function
a. General When an optional PS3 expansion kit is installed Function Copies Orientation Duplex print Saddle stitch Binding edge N-up N-up direction N-up border line b. Paper input When an optional PS3 expansion kit is installed Function Paper size Custom paper size Source selection Different first page PCL5e/ PCL6 Yes 1 size Yes Yes PS Yes 1 size Yes Yes Yes PPD (Windows) Yes 3 sizes*3*5 Yes N/A N/A PPD (Macintosh) Yes N/A Yes Yes Yes PCL5e/ PCL6 1 - 999 Yes Yes Yes Left/top/ right 2/4/6/8 Fixed Yes PS 1 - 999 Yes Yes Yes Left/top/ right 2/4/6/8 Fixed Yes PPD (Windows) 1 - 999 Yes Yes No Long/short 2/4*3*4 Fixed PPD (Macintosh) 1 - 999 Yes Yes N/A Long/short 2/4/6/9/16 Selectable
Dehumidification heater Balance detection Default size setting
Yes(always) Yes
Mounting/demounting of the tray
C. Output Equipment
(1) Face-down Exit Tray (included in the base engine)
Output position/ method Output paper capacity Output paper size Face-down output at the upper side of main unit 400 sheets (80g/m² sheet) A3, B4, A4, A4R, B5, B5R, A5R 11 " x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11 ", 8.5" x 11 "R, 5.5" x 8.5"R Executive, postal card, Monarch (98 x 191) Com-10 (105 x 241), DL (110 x 220), C5 (162 x 229), ISO B5 (176 x 250) Tracing paper : 52 ~ 59g/m² / 14 ~ 15lbs Plain paper : 60 ~ 128g/m² / 16 ~ 34lbs Index paper : 176g/m² / 47lbs Cover paper : 205g/m² / 54 ~ 55lbs Transparency firm Not provided Provided
Transparency inserts Yes c. Paper output
Spec of media for paper output
When an optional PS3 expansion kit is installed Function PCL5e/ PCL6 Yes Yes Yes Yes PS Yes Yes Yes Yes Yes PPD (Windows) Yes Yes Yes Yes Yes PPD (Macintosh) Yes Yes Yes Yes Yes
Output tray selection Yes Mail bin Staple Offset Punch
Remaining paper detection Exit tray full detection
2. Specific Function
A. Printer Function
(1) Platform
IBM PC/AT (Include compatible machine) Macintosh (680x0), Power Macintosh, iMac, G3Macintosh * For Macintosh OS, the AR-PK1 is required. Windows 95/98/Me Windows NT 4.0 Windows 2000 Mac OS 7.6 to Mac OS 9 Windows 95/98/Me Windows NT 4.0 Windows 2000 Windows 95/98/Me Windows NT 4.0 Windows 2000 Mac OS 8.5.1 - Mac OS 9
d. Graphic When an optional PS3 expansion kit is installed Function Resolution Halftone Graphic mode Smoothing Toner save Photo enhancement Negative image Mirror image Zoom Fit to page PCL5e/ PCL6 600/300 dpi N/A Yes Yes Yes Yes*8 N/A N/A N/A Yes PS 600 dpi Yes N/A Yes Yes Yes Yes Horizontal/ vertical N/A Yes PPD PPD (Windows) (Macintosh) 600 dpi Yes N/A Yes Yes N/A Yes 600 dpi N/A N/A Yes Yes N/A Yes
(2) Support OS
Custom PS
Custom PCL5e/6(XL) SPDL PPD
Horizontal Yes Yes N/A Yes N/A
*
For Macintosh OS, the AR-PK1 is required.
(3) PDL emulation
PCL6 compatible, PCL5e compatible, PostScript Level 2 compatible, PostScript 3 compatible
AR-M350 SPECIFICATIONS 3-2
e. Font When an optional PS3 expansion kit is installed Function Resident font Download font PCL5e/ PCL6 45 fonts Bitmap TrueType, Graphic PS 136 fonts Bitmap Type1 TrueType PPD PPD (Windows) (Macintosh) 136 fonts*6 Bitmap Type1 TrueType 35 fonts N/A
B. Expanded RAM
Installation of an expanded RAM will avoid the following status. 1) Time out error reduction 2) Spool time reduction 3) Avoidance of VM error / memory full Use a commercially available RAM of the following specifications. If a RAM which does not meet the specifications is installed, it may cause a trouble such as that it is not recognized or its capacity is not correctly recognized. DIMM TYPE DIMM capacity CAS LATENCY SPD Parity ECC 168pin 3.3V Unbuffered SDRAM DIMM Non-ECC 64MByte, 128MByte, 256MByte CL=2 Supporting Not support Not support
f. Others When an optional PS3 expansion kit is installed Function Watermark*7 Overlay Job retention*1 PCL5e/ PCL6 Yes Yes Yes PS Yes Yes Yes Yes Yes Yes Yes PPD PPD (Windows) (Macintosh) Yes N/A N/A N/A N/A N/A N/A Yes N/A Yes Yes N/A Yes N/A
SDRAM CLOCK For PC100, PC133
Account control Yes Custom settings Yes Automatic configuration*2 Job end notification Yes Yes
(As of March / 2001) Manufacture Capacity Kingston Technology 128MB 128MB 256MB Viking 64MB Compornents 64MB 128MB 128MB Model name KVR133X64C3/ 128 KVR133X64C3 -128 KVR133X64C3 -256 VIK8641CL2 VIK8641CL2 VIK6642CL2 VIK6642CL2 VIK2642CL2 RAM CHIP name HYB39S64800BT -7.5 D456821G-A75 -9JF HY57V28820AT-H µPD456841G5 -A80-9JF D456841G5-A80 -9JF TC59SM708FT-80 D4564841G5-A80 -9JF TC59SM708FT-80 Note
* 1 In the models without a hard disk drive, an optional hard disk drive must be installed . * 2 Functions when peripheral devices are installed. * 3 Not supported in the Windows NT 4.0 environment. * 4 2/4/6/9/16 is supported in the Windows 2000 environment. * 5 Only one size is supported in the Windows 2000 environment. * 6 Only 35 fonts are supported in the Windows NT 4.0 environment. * 7 This function is limited for PPD. * 8 PCL6 only
(5) Compatibility
PCL 5e compatibility Target for PCL5e is to be compatible with HP LaserJet 4000. Small margin difference, rendering difference by different font family, default and transfer function difference are not to be included in the compatibility. All the PJL commands are not necessarily included in the compatibility. Target for PCL6 is to be compatible with HP LaserJet 4000. Small margin difference, rendering difference by different font family, default and transfer function difference are not to be included in the compatibility. All the PJL commands are not necessarily included in the compatibility. Roman PostScript is targeted to be compatible with Adobe PostScript as performed in HP LaserJet 4000. Small margin difference, rendering difference by different font family, default and transfer function difference are not to be included in the compatibility. 256MB Memory Card 64MB Technology 128MB
DM864VS65804X GM72V66841XT75 -7G DM1665VS65804 HY57V64820HG X-7G
C. Scanner function
(1) Scanner function
Scanner mode Scan to E-mail (Internet FAX) Scan to Server (Client PC) SMTP server FTP server TCP/IP TIFF, PDF, TIFF-F Uncompressed, G3(1-dimension) *1, G4 *2 *1 G3 (1-dimension) = MH (Modified Huffman) *2 G4 = MMR (Modified MR)
PCL6 compatibility
(2) Support System
Embedded server Protocol
PostScript Compatibility
(3) Support Image
Format Compression method
(4) Transmission Mode
DSPF/OC O transmission switching (Switching during the reading is not feasible)
AR-M350 SPECIFICATIONS 3-3
(5) Image Process
Half tone reproduction Exposure adjustment Quality selection Resolution* Equivalent to 256 levels Light / Auto / Dark Half-tone ON/OFF Normal ( 200x200dpi ) Fine ( 300x300dpi ) Super fine ( 400x400dpi ) Ultra fine ( 600x600dpi ) Varies with the file type/transmission method Commonly use ERDH area of memory. Special : As per ERDH memory Specifying by one-touch or group Max. 500 destinations (in conjunction with the one-touch dial of FAX) Max. 100 destinations can be registered for FTP and Desktop. To be registered in one-touch O
D. Copy function
(1) Copy Speed
AR-M350 A4, 8.5"x11" A4R, 8.5"x11"R A5R, 5.5"x8.5"R, Invoice-R B5 B5R, Exective-R B4, 8.5"x14" A3, 11"x17" Extra, Envelope 35 25 35 35 25 35 35 25 35 45 30 45 AR-M450 45 30 45 45 30 45 Actual Reduction Enlargement Actual Reduction Enlargement
(6) Original Memory
Standard Memory expansion Specified destination One-touch*
(7) Specified Destination
35 25 20 17 17
35 25 20 17 17
35 25 20 17 17
45 30 22 20 20
45 30 22 20 20
45 30 22 20 20
Group* Program
(8) Specified Multiple Destinations
Specified destination Specifying by one-touch or group No. of registration Max. 300 items (in conjunction with those of FAX) Sequential O( broadcasting E-mail only. It is not available for FTP/Desktop.) Simultaneous FAX O (Specifying multiple destinations of FAX, E-mail or transmission FTP and broadcasting by a single scan) O : Available
Japan P/C In case of printing on post card, engine speed can vary with system configuration, because next paper is fed after machine completely output previous page. * Figures in reduction/enlargement are represented by those at the ratio to show slowest speed
(2) First Copy Time
Conditions: A4 or 8.5"x11"P from front tray of PPC, without HDD and with polygon motor running.
(9) Functions
Transmitting Rotating transmission functions Long length original transmission Verification stamp function Report/list Transmit/receive record functions Transmit/receive result Address/phone directory list Group list ID/sender list Program list O (to be matched with FAX specification) X Option O O O O O O
AR-M350 Document glass *1 DSPF *1
AR-M450
Less than 5.3 seconds Less than 4.6 seconds Less than 6.0 seconds Less than 5.3 seconds
During OC/high-speed mode AR-M350 AR-M450 42 cpm (93%) 40 cpm (88%) 40 cpm (88%)
(3) Job Speed
S S D S D D *1 *2 *3
33 cpm (94%) 32 cpm (91%) 32 cpm (91%)
*1 S *2 S *3 D
S : A4 / 8.5" x 11"P D : A4 / 8.5" x 11"P D : A4 / 8.5" x 11"P
original 5 sheets copy 5sets original 10 sheets copy 5sets original 5 sheets (10 pages) copy 5sets
Note: First copy time has been factored into calculation resulting in reduced CPM.
(4) Continuous Copy
Max. multiple number 999 pages
(5) Copy Ratio
Copy ratio AB series : 25%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 400% Inch series : 25%, 64%, 77%, 100%, 121%, 129%, 400% Zoom 25 - 400% 25 - 200% (Copy from DSPF) Independent Not provided scaling
(6) Exposure/Copy Quality Process
Exposure mode Manual steps Smoothing Toner save mode Binary: Text(auto/manual), Text/photo, Photo 256 levels: Not provided 9 steps Standard Standard
AR-M350 SPECIFICATIONS 3-4
(7) Copy Function
Function APS AMS Paper type select O O O By type setting Auto tray switching O Rotation copy O Electronic sort O Rotation sort X Reserved copy O Prior tray setting X Recall/register of program O Proof copy X Preheat function O To be set up by key operator Auto power shut-off function O To be set up by the key operator program Account control O 100 accounts Communication support (RIC) O Card counter support Only provided the connector Coin vendor support Only provided the connector Margin shift O Edge erase / Center erase O Dual page copying O Covers X Transparency insert X Centering X Multi shot (N in 1) O (2 in 1 / 4 in 1) Pamphlet copy O 2-sided copy orientation change O Large capacity original mode 0 (Max. 140 pages) B/W reverse X Shading X Mirror image X Repeat X Date stamp X Stamp X Page stamp X Zaurus print X
3. B/W Scanner Module (DSPF)
(1) Form
Scanner (Document glass) / DSPF standard Operation panel integral type (common hardware for all the destinations)
(2) Destination judgment
When connected with a base engine, the type (Japan domestic 100V, overseas 100V or overseas 200V systems) is detected and the settings will accordingly be changed.
(3) Resolution / Gradation
Reading resolution (dpi) Copy mode Magnification 25~99 100 OC 600x600 600x600 600x600 600x300 OC (High speed): DSPF/ 600x300 600x300 SPF(standard) DSPF/SPF 600x600 600x600 (high quality) FAX transmit mode Selection mode Standard Fine 600x391.2 600x391.2 Input resolution: OC Input 600x300 600x300 resolution: DSPF Transmitting 203.2x97.8 203.2x195.6 resolution Scanner mode Selection mode Standard Fine Input 600x391.2 600x391.2 resolution: OC Input 600x300 600x300 resolution: DSPF Transmitting 200x200 300x300 resolution 256 tones 101~200 201~400 600x600 600x600 600x600 600x600 600x600 600x600 -
Input and transmitting resolution (dpi)
Super fine Ultra fine 600x391.2 600x391.2 600x300 600x300
Special function
203.2x391 406.4x391
Super fine Ultra fine 600x391.2 600x600 600x300 600x300
400x400
600x600
Reading level Electrodeless xenon lamp Exposure lamp Output level Binary
O : Standard Function X : Not provided
(4) Document Glass
Reading area Original alignment Original size detection Sizes to be detected 297x431.8(mm) 11.7"x17" Left edge / Rear corner alignment Provided (Standard size only) Automatic (one detection unit to be used with software modification by destination) Inch-1 11"x17", 8.5"x14", 8.5"x11", (Default at overseas 8.5"x11"R, 5.5"x8.5" 100V base engine) Inch-2 11"x17", 8.5"x13", 8.5"x11", 8.5"x11"R, 5.5"x8.5" AB-1(Default at Japan A3, B4, A4, A4R, B5, B5R, domestic 100V / A5A3, B4, A4, A4R, A5 overseas 200V base engines) AB-2 A3, A4R, A5, 216x330 mm
AR-M350 SPECIFICATIONS 3-5
(6) Power Source
OR guide display Rear left side (Print display) Left side OR guide (Print display) Original reference position " " Supplied from the main unit
(From the Interior side) [5-1/2]·[A5E]·[B5E]·[A4E/A5]· [8.5"]·[B4/B5]·[11"]·[A3/A4] Interior side OR guide (From the left side) (Print display) [5-1/2]·[A5]·[B5]·[A4/A5E]· [8-1/2]·[B5E]·[11"]·[A4E]·[13"]· [14"]·[B4]·[A3]·[17"] Interior side OR guide Book marks are at A4 and 8-1/2 positions. The position available to attach the staple position guide label when the optional finisher (desktop console type) is equipped.
(7) Dimensions
External dimensions (WxDxH) Occupied space dimensions (WxD) Weight Type Display dot number LCD operating dimension LCD back-light LCD brightness adjustment 808 x 619x180 mm 945 x 619 mm (When the tray is extended) Approx. 19.5 kg Dot map LCD, touch panel 640 x 240 dots (dot pitch 0.24x0.24 mm) 153.5 x 57.5 mm Fluorescent tube method Provided
(8) Display device at scanner part
(5) DSPF/SPF
Type DSPF One-scan-dual-side scanning method DSPF with OC integrated 45 opm 22.5 opm
(9) Key
Mode selection area Job status key Printer mode key (online display LED/data in-memory display LED) Scan/Fax mode key (busy display LED/data in-memory display LED) Copy mode key User definition key Basic input area Start key CA key 10-key Clear key * key # key
Scan speed Standard mode High quality mode Original Center alignment alignment Original size A3, B4, A4, A4R, B5, B5R, A5, A5R11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 8.5"x11"R,5.5"x8.5", 5.5"x8.5"R (in Fax mode : long-length paper up to 800mm is applicable) Original 50~128g/m², 15~34lbs paper weight Original Max. 50 sheets stack (max. 30 sheets for A3, B4,11"x17",8.5"x14") capacity (When, however, exceeding 105g/m² and A3, B4,11"x17",8.5"x14", max. 15 sheets) or, Total thickness less than 6.5mm (at 50~80g/m², 15~21lbs) 5.0mm (at 80~128g/m², 21~34lbs) Transparency film, secondary original paper, Not transportable tracing paper, carbon paper, thermal paper, original type original with crumple/crimp/rip, original with attachment/clipping, original with many punch holes (with 2 or 3 holes acceptable), original preprinted with ink-ribbon. Original size Provided detection Sizes to be Automatic (one detection unit to be used with software detected modification by destination) Inch-1 11"x17", 8.5"x14", 8.5"x11", (Default at overseas 8.5"x11"R, 5.5"x8.5" 100V base engine) Inch-2 11"x17", 8.5"x13", 8.5"x11", 8.5"x11"R, 5.5"x8.5" A3, B4, A4, A4R, B5, B5R, A5, A3, AB-1(Default at B4, A4, A4R, A5, Japan domestic 8.5"x11", 216x330 mm 100V / overseas 200V base engines) AB-2 A3, B4, A4, A4R, A5, B5, B5R, 216x330 mm, 8.5"x11" Original tray Center of the tray Original reference position " " guide (inscribeddisplay) Original face-down placement display indication " " Original Guide (From Center) (inscribed display) [B5E]·[A4E/A5]·[8.5"]·[B4/B5]· [11"]·[A3/A4] The position available to attach the staple position guide label when the optional finisher (desktop console type) is equipped.
(10) Touch sense method
Resistive film method
(11) Used character in the LCD
Dot 8 x 16 , 16 x 16 dots Bold display O
4. Rack for Scanner
(1) Dimensions
Strength External dimensions (WxDxH) Occupied space dimensions (WxD) Weight 60 kg 30 x 415 x 860 mm (Single goods) 575 x 415 mm (State of installation) (2pieces) Approx.5 kg (2pieces)
* For the items which are not specified in this Service Manual, refer to the AR-P350/P450 Service Manual.
AR-M350 SPECIFICATIONS 3-6
[4] CONSUMABLE PARTS
1.Supply system table
A.USA
NO Name 1 Toner CA(Black) 2 3 4 Developer Drum 50K maintenance kit Content Toner(Toner : Net Weight 814g) Developer(Developer : Net Weight 450g) Drum Cleaner blade Drum separation pawl Screen grid Toner reception seal Side malt F Side malt R Charging plate Transfer roller Discharging plate Paper dust removing unit DV blade DV side seal F DV side seal R Upper heat roller Fusing separation pawl (Upper) Lower heat roller Fusing separation pawl (Lower) Cleaner blade Cleaning roller Bearing Staple cartridge Staple cartridge Life 27K 100K 50K 50K Product name Remark AR-450NT *Life setup is based on A4 6% (*1 AR-450NT-J) AR-450ND AR-450DR AR-450KC1
5
100K maintenance kit
6 7 8 9
Upper heat roller kit Lower heat roller kit Cleaner blade Cleaning roller
10 Staple cartridge 11 Staple cartridge
x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x4 x1 x2 x10 x10 x20 x3 x3
100K
AR-450KA1
200K 200K
AR-450UH AR-450LH AR-450CB=(AR-450BL)x10 AR-450CR=(AR-450RC)x10 Common with cartridge for AR-FN4 & AR-FN6 Common with cartridge for AR-FN7
50K(x10) AR-450CB 200K(x10) AR-450CR 3000x3 5000x3 AR-SC1 AR-SC2
*1: For USA Government Note1: Print on Master/individual carton:Toner/Developer in 2 languages (English/French), DR in 4 languages (English/French/German/Spanish). Note2: Packed with machine: DR 50K/Developer UN/Process UN Note3: The other maintenance parts which are not listed above are registered as service parts.
B.CANADA/Latin America
NO 1 2 3 4 Name Toner CA(Black) Developer Drum 50K PM kit Content Toner(Toner : Net Weight 814g) Developer(Developer : Net Weight 450g) Drum Cleaner blade Drum separation pawl Screen grid Toner reception seal Side malt F Side malt R Charging plate Transfer roller Discharging plate Paper dust removing unit DV blade DV side seal F DV side seal R Upper heat roller Lower heat roller Fusing separation pawl (Upper ) Fusing separation pawl (Lower) Cleaning roller Bearing Staple cartridge Staple cartridge Life 27K 100K 50K 50K Product name AR-450NT AR-450ND AR-450DR AR-450KC Remark *Life setup is based on A4 6%
5
100K PM kit
6
200K PM kit
7 8
Staple cartridge Staple cartridge
x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x4 x2 x1 x2 x3 x3
100K
AR-450KA
200K
AR-450KB
3000x3 5000x3
AR-SC1 AR-SC2
Common with cartridge for AR-FN4 & AR-FN6 Common with cartridge for AR-FN7
Note1: Print on Master/individual carton:Toner/Developer in 2 languages (English/French), DR in 4 languages (English/French/German/Spanish). Note2: Packed with machine: DR 50K/Developer UN/Process UN Note3: The other maintenance parts which are not listed above are registered as service parts.
AR-M350 CONSUMABLE PARTS 4-1
C.Europe/Australia/New Zealand
NO 1 2 3 4 Name Toner CA(Black) Developer Drum 50K PM kit Content Toner(Toner : Net Weight 814g) Developer(Developer : Net Weight 450g) Drum Cleaner blade Drum separation pawl Screen grid Toner reception seal Side malt F Side malt R Charging plate Transfer roller Discharging plate Paper dust removing unit DV blade DV side seal F DV side seal R Upper heat roller Lower heat roller Fusing separation pawl (Upper ) Fusing separation pawl (Lower) Cleaning roller Bearing Staple cartridge Staple cartridge Life 27K 100K 50K 50K Product name AR-450T AR-450DV AR-450DM AR-450KC Remark *Life setup is based on A4 6%
5
100K PM kit
6
200K PM kit
7 8
Staple cartridge Staple cartridge
x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x4 x2 x1 x2 x3 x3
100K
AR-450KA
200K
AR-450KB
3000x3 5000x3
AR-SC1 AR-SC2
Common with cartridge for AR-FN4 & AR-FN6 Common with cartridge for AR-FN7
Note1: Print on Master/individual carton:4 languages (English/French/German/Spanish). Note2: Packed with machine: DR 50K/Developer UN/Process UN Note3: The other maintenance parts which are not listed above are registered as service parts.
D.Middle East/ Africa
NO 1 2 3 4 Name Toner CA(Black) Developer Drum 50K PM kit Content Toner(Toner : Net Weight 814g) Developer(Developer : Net Weight 450g) Drum Cleaner blade Drum separation pawl Screen grid Toner reception seal Side malt F Side malt R Charging plate Transfer roller Discharging plate Paper dust removing unit DV blade DV side seal F DV side seal R Upper heat roller Lower heat roller Fusing separation pawl (Upper ) Fusing separation pawl (Lower) Cleaning roller Bearing Staple cartridge Staple cartridge Life 27K 100K 50K 50K Product name AR-450FT AR-450SD AR-450DR AR-450KC Remark *Life setup is based on A4 6%
5
100K PM kit
6
200K PM kit
7 8
Staple cartridge Staple cartridge
x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x4 x2 x1 x2 x3 x3
100K
AR-450KA
200K
AR-450KB
3000x3 5000x3
AR-SC1 AR-SC2
Common with cartridge for AR-FN4 & AR-FN6 Common with cartridge for AR-FN7
Note1: Print on Master/individual carton:4 languages (English/French/German/Spanish). Note2: Packed with machine: DR 50K/Developer UN/Process UN Note3: The other maintenance parts which are not listed above are registered as service parts.
AR-M350 CONSUMABLE PARTS 4-2
E.Israel/Russia/CIS/Philippines
NO 1 2 3 4 Name Toner CA(Black) Developer Drum 50K PM kit Content Toner(Toner : Net Weight 814g) Developer(Developer : Net Weight 450g) Drum Cleaner blade Drum separation pawl Screen grid Toner reception seal Side malt F Side malt R Charging plate Transfer roller Discharging plate Paper dust removing unit DV blade DV side seal F DV side seal R Upper heat roller Lower heat roller Fusing separation pawl (Upper ) Fusing separation pawl (Lower) Cleaning roller Bearing Staple cartridge Staple cartridge Life 27K 100K 50K 50K Product name AR-450FT AR-450SD AR-450DR AR-450KC Remark *Life setup is based on A4 6%
5
100K PM kit
6
200K PM kit
7 8
Staple cartridge Staple cartridge
x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x4 x2 x1 x2 x3 x3
100K
AR-450KA
200K
AR-450KB
3000x3 5000x3
AR-SC1 AR-SC2
Common with cartridge for AR-FN4 & AR-FN6 Common with cartridge for AR-FN7
Note1: Print on Master/individual carton:4 languages (English/French/German/Spanish). Note2: Packed with machine: DR 50K/Developer UN/Process UN Note3: The other maintenance parts which are not listed above are registered as service parts.
F.Asia
NO 1 2 3 4 Name Toner CA(Black) Developer Drum 50K PM kit Content Toner(Toner : Net Weight 814g) Developer(Developer : Net Weight 450g) Drum Cleaner blade Drum separation pawl Screen grid Toner reception seal Side malt F Side malt R Charging plate Transfer roller Discharging plate Paper dust removing unit DV blade DV side seal F DV side seal R Upper heat roller Lower heat roller Fusing separation pawl (Upper ) Fusing separation pawl (Lower) Cleaning roller Bearing Staple cartridge Staple cartridge Life 27K 100K 50K 50K Product name AR-450ST AR-450SD AR-450DR AR-450KC Remark *Life setup is based on A4 6%
5
100K PM kit
6
200K PM kit
7 8
Staple cartridge Staple cartridge
x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x4 x2 x1 x2 x3 x3
100K
AR-450KA
200K
AR-450KB
3000x3 5000x3
AR-SC1 AR-SC2
Common with cartridge for AR-FN4 & AR-FN6 Common with cartridge for AR-FN7
Note1: Print on Master/individual carton:4 languages (English/French/German/Spanish). Note2: Packed with machine: DR 50K/Developer UN/Process UN Note3: The other maintenance parts which are not listed above are registered as service parts.
AR-M350 CONSUMABLE PARTS 4-3
G.Hong kong
NO 1 2 3 4 Name Toner CA(Black) Developer Drum 50K PM kit Content Toner(Toner : Net Weight 814g) Developer(Developer : Net Weight 450g) Drum Cleaner blade Drum separation pawl Screen grid Toner reception seal Side malt F Side malt R Charging plate Transfer roller Discharging plate Paper dust removing unit DV blade DV side seal F DV side seal R Upper heat roller Lower heat roller Fusing separation pawl (Upper ) Fusing separation pawl (Lower) Cleaning roller Bearing Staple cartridge Staple cartridge Life 27K 100K 50K 50K Product name AR-450ST-C AR-450SD-C AR-450DR-C AR-450KC Remark *Life setup is based on A4 6%
5
100K PM kit
6
200K PM kit
7 8
Staple cartridge Staple cartridge
x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x4 x2 x1 x2 x3 x3
100K
AR-450KA
200K
AR-450KB
3000x3 5000x3
AR-SC1 AR-SC2
Common with cartridge for AR-FN4 & AR-FN6 Common with cartridge for AR-FN7
Note1: Print on Master/individual carton:2 languages (English/Chinease). Note2: Packed with machine: DR 50K/Developer UN/Process UN Note3: The other maintenance parts which are not listed above are registered as service parts.
H.Taiwan
NO 1 2 3 4 Name Toner CA(Black) Developer Drum 50K PM kit Content Toner(Toner : Net Weight 814g) Developer(Developer : Net Weight 450g) Drum Cleaner blade Drum separation pawl Screen grid Toner reception seal Side malt F Side malt R Charging plate Transfer roller Discharging plate Paper dust removing unit DV blade DV side seal F DV side seal R Upper heat roller Lower heat roller Fusing separation pawl (Upper ) Fusing separation pawl (Lower) Cleaning roller Bearing Staple cartridge Staple cartridge Life 27K 100K 50K 50K Product name AR-450FT-T AR-450SD-C AR-450DR-C AR-450KC Remark *Life setup is based on A4 6%
5
100K PM kit
6
200K PM kit
7 8
Staple cartridge Staple cartridge
x1 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x4 x2 x1 x2 x3 x3
100K
AR-450KA
200K
AR-450KB
3000x3 5000x3
AR-SC1 AR-SC2
Common with cartridge for AR-FN4 & AR-FN6 Common with cartridge for AR-FN7
Note1: Print on Master/individual carton:4 languages (English/French/German/Spanish). Note2: Packed with machine: DR 50K/Developer UN/Process UN Note3: The other maintenance parts which are not listed above are registered as service parts.
AR-M350 CONSUMABLE PARTS 4-4
2.Production number identification
A. Drum cartridge
The lot number, printed on the front side flange, is composed of 10 digits, each digit showing the following content: 1 1 2 3 4 2 3 4 5 6 7 8 9 10 1 2 3 4
C. Developer cartridge
The lot number is composed of 10 digits each digit indicates the following. The lot number is printed on the bag. 1 2 3 4 5 6 7 8 9 10
5/6 7
8/9 10
Number For this model, this digit is 2. Letter Indicates the model conformity code. T for this model. Number Indicates the end digit of the production year. Number or X, Y, Z Indicates the production month. X stands for October, Y November, and Z December. Number Indicates the production day on the month. Number or X, Y, Z Indicates the month of packing. X stands for October, Y November, and Z December. Number Indicates the day of the month of packing. Letter Indicates the production factory. "A" for Nara Plant.
5/6 7
8/9 10
Number For this model, this digit is 2. Letter Indicates the model conformity code. T for this model. Number Indicates the end digit of the production year. Number or X, Y, Z Indicates the production month. X stands for October, Y November, and Z December. Number Indicates the production day on the month. Number or X, Y, Z Indicates the month of packing. X stands for October, Y November, and Z December. Number Indicates the day of the month of packing. Letter Indicates the production factory. "A" for Nara Plant.
B. Toner cartridge
The lot number is composed of 7 digits each digit indicates the following. The lot number shall be printed in the position shown below. 1 1 2 3 4 5,6 7 2 3 4 5 6 7
3. Environmental conditions
A. Operating conditions
30 85%
85
Version number (A - sequentially revised) Numeral figure Indicates the end digit of the production year. Letter Indicates the production factory. (B for SOCC) Destination code Numeral figures Indicates the production day. Numeral figure or X, Y, Z Indicates the production month. X stands for October, Y November, and Z December.
Humidity (%)
35
60%
20 10
Temperature
35
(Without dew condensation)
Lot No. Location
B. Storage conditions
90
Lot No. Location
Humidity (%)
20
Heat seal
-10
Temperature
40
(Without dew condensation)
Aluminum bag
AR-M350 CONSUMABLE PARTS 4-5
[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance
!
" #
$
%
1 2 3 4 5 6 7 8 DSPF exit area Document feeding area cover Original guides Document feeder tray Operation panel Document cover Document scanning windows Document glass
&
Scanned originals are deposited here. Open to remove misfeed originals in this area. Adjust to the size of the originals. Set the originals here for automatic feeding. Use for operation of copier, network scanner, and facsimile features and for printer configuration operations. Sheet type originals are scanned here. All originals which cannot be copied from the document feeder tray must be copied here.
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-1
2. Operation panel
When the printer is equipped with a scanner module, the operation panel on the main unit will become inoperative and the panel on the scanner module must be used. The operation panel on the printer engine side does not function.
!
"#
$
1 2 3 Touch panel
%
&
'
!
The machine status, messages and touch keys are displayed on the panel. The display will change to show the status of print, copy, network scan or fax according to which of those modes is selected. Mode select keys and indicators Use to switch the display mode of the touch panel. [PRINT] key/ Press to enter the print mode. READY indicator/ ·READY indicator DATA indicator Print data can be received when this indicator is lit. ·DATA indicator Lights up or blinks when print data is being received. Also lights up or blinks when printing is being performed. Press to enter the network scan/fax mode. ·LINE indicator During sending or receiving FAX data or scan data, this lamp is lighted. ·DATA indicator Lights up or blinks when FAX data is being received. Also lights up or blinks when printing is being performed. Press to select the copy mode and display the basic screen of the copy mode. Even when the machine is busy in another mode, the basic copy mode screen will appear when the [COPY] key is pressed. If this key is pressed and held while the basic screen of the copy mode is displayed, the total output count and the quantity of toner remaining (percentage) will be displayed. Press to display the current job status. Use to adjust the contrast of the touch panel or to set key operator programs. Use to enter number values for various settings. If the auditing mode has been set, press this key to close an open account after finishing a copy, facsimile scanning or network scanning job. Press to select the job memory mode. Press to clear a copy quantity entry. If this key is pressed while the automatic document feeder is being used, any originals in progress will be automatically output. When the indicator is lit, copying, facsimile scanning and network scanning jobs can be started. Press to start copying. Press to clear all selected settings and return the machine to the initial settings for the currently selected mode. Before starting a copy operation, press the [CA] key first.
4
[IMAGE SEND] key/ LINE indicator/ DATA indicator
5
[COPY] key
6 7 8 9 10 11
[JOB STATUS] key [CUSTOM SETTINGS] key Numeric keys [*] key ([ACC.#-C] key) [#/P] key* [C] key*
12 13
Start key* [CA] key*
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-2
3. Touch Panel
A. Basic screen of copy mode
When the copy mode key is pressed, this display screen will appear showing the basic copy mode selections.
!
READY TO SCAN FOR COPY. SPECIAL MODES 2-SIDED COPY OUTPUT ORIGINAL A4 AUTO EXPOSURE AUTO A4 PAPER SELECT
1. A4 2. A4 3. A3 4. A4R
'
A4
100% COPY RATIO
"
1 2 Message display
#
$
%
&
Basic status messages are displayed here. When interrupt copy is available, the [INTERRUPT] key will be displayed here. When an interrupt copy job is being run, a [CANCEL] key will be displayed here to be used for canceling the interrupt copy job. Displays the selected number of copies before the [START] key is pressed or the number of completed copies after the [START] key is pressed. A single copy can be made when "0" displayed. Touch to display the duplex copy mode setting screen. A highlighted selection on the screen will indicate the currently selected mode. The setting screen can be closed by touching the [OK] key on the setting screen whether or not a selection change was made. Touch to display the output mode setting screen. A highlighted selection on the screen will indicate the currently selected mode. The setting screen can be closed by touching the [OK] key on the setting screen whether or not a selection change was made. Touch to display the special modes selection screen. The display shows the location of the paper trays, the size of the paper in the trays and the approximate amount of paper loaded in each tray. The approximate amount of paper in a tray is indicated by . The original paper size will be displayed when originals are placed on the document glass or in the document feeder. A touch of the [EXPOSURE] key will open the exposure selection window. A highlighted key on the exposure window indicates which exposure mode (AUTO, TEXT, TEXT/PHOTO or PHOTO) is currently selected. When an exposure mode other than AUTO is selected, an exposure level scale will also appear in the window. Displays the selected paper size. When the auto paper select mode has been selected, "AUTO" will be displayed.A touch of the [PAPER SELECT] key will open the paper selection window. When a selection is made, the selection window will close. To close the window without making a selection touch the key again Displays the selected copy ratio. Touch to display the reduction and enlargement copy ratio selection screen.
[INTERRUPT] key display area
3
Copy quantity display
4
[2-SIDED COPY] key
5
[OUTPUT] key
6 7 8 9
[SPECIAL MODES] key Paper size display Original size display Exposure display and [EXPOSURE] key
10
Paper select display and [PAPER SELECT] key Copy ratio display and [COPY RATIO] key
11
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-3
B. Print mode screen
This screen is displayed when the print mode is selected. (The display varies with the mode. For the display in other modes)
SELECT JOB. PRINT HOLD JOB LIST Sharp 005 Microsoft Word - Test001 Sharp 006 EXCEL1 CONDITION SETTINGS
1/1
! "
1 2 3 Message display Job status screen Print hold job list
#
4 5
A message is displayed in this column. Refer to the text. If the job retention function is used, the list of stored print jobs is displayed here (up to 100 jobs). The job retention function can be used only if the printer is equipped with a hard disk drive unit. If the main switch is turned off, stored print data will be cleared. Display scroll keys Use these keys to view the job hold list when it is contained on more than one screen. [CONDITION SETTINGS] key Use to switch the display to the printer configuration menu.
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-4
C. Job status screen (common to print, copy, network scan, and fax modes)
This screen is displayed when the [JOB STATUS] key on the operation panel is pressed. A job list showing the current job at the top of the job queue or a list showing completed jobs can be displayed. The contents of the jobs can be viewed, moved up to the highest priority in the job queue or deleted from the queue.
JOB QUEUE COPY SHARP001 054234 SETS / PROGRESS 003 / 000 003 / 000 010 / 000 STATUS COPYING PAPER EMPTY* DETAIL WAITING PRIORITY STOP/DELETE PRINT JOB E-MAIL/FTP FAX JOB JOB QUEUE 1/1 COMPLETE
!
1 Job list
"
#
$
%
&
'
A job list which indicates the current job and reserved jobs or a job list which indicates completed jobs is displayed. The icons to the left of the jobs in queue represent the job mode. Print mode Network scan mode Fax mode (transmission job) Fax mode (reception job) When a job list which indicates the current job and reserved jobs is displayed, the displayed jobs themselves are operation keys. To cancel printing or to give a job the highest print priority, touch the relevant job key to select the job and execute the desired operation using the keys described in 7,8, and 9 Use to switch the job list between "JOB QUEUE" and "COMPLETE". "JOB QUEUE": Displays the list of the current job and the reserved jobs. "COMPLETE": Displays the list of completed jobs. Use to display the print job list for all modes (print, copy, network scan, and fax). Use to display the list of jobs that use the network for sending e-mail by SNMP protocol or sending to an ftp site or desktop by ftp protocol. Use to display the fax communication status and the reserved transmission job status. Use to switch the page of the displayed job list. Use to cancel or delete the current job or delete the selected reserved job. Received fax print jobs that have been reserved, however, cannot be deleted. If you select a job among the reserved jobs in the "JOB QUEUE" job list to which you wish to give the highest priority and touch this key, the job will move to the highest priority reserved job. Use to display the detailed information of the selected job. The paper size for printing can be changed from the specified size.This function, however, cannot be used when a fax reception print job is selected. Copy mode
2
Mode switching key
3 4 5 6 7 8 9
[PRINT JOB] key [E-MAIL/FTP] key [FAX JOB] key Display switching keys [STOP/DELETE] key [PRIORITY] key [DETAIL] key
* "PAPER EMPTY" in the job status display When a job status display indicates "PAPER EMPTY", the specified size paper is not loaded in any tray to run that job. In this case, printing is suspended for that job until the required paper is loaded. Until the required paper is loaded another reserved job data will be printed if possible. (If paper runs out during printing, another job will not be printed.) If you wish to change the paper size because you do not have the specified size paper, you can change the size by touching the current job key to select it and touch the [DETAIL] key described in 9
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-5
4. Cross sectional view
3 SPSD
1
2
4 SDD 5
6
7
16
15
14
No. 1 2 3 4 5 6 7 8 CIS unit (AR-EF1 only) Original resist roller Original resist front sensor (SPSD) Original set sensor Original take-up roller Original length sensor 1 (SLD1) Original length sensor 2 (SLD2) CCD/lens unit Name
13
12 11 10
9
No. 9 10 11 12 13 14 15 16 Original feed roller Copy lamp base unit No. 1 mirror Copy lamp (Xenon) Mirror base unit No. 3 mirror No. 2 mirror Original exit roller
8
Name
5. Switch, Sensor
4 3 2 1 8 5 6 7
12 11 10
Code 1 2 3 4 5 6 7 8 9 10 11 12 SSET SPOD MHPS SLD1 SLD2 SPSD SCOV SDD SOCD SPF original resist front sensor SPF paper feed cover sensor SPF original set sensor OC open/close sensor Original size sensor PWB (Light emitting side) SPF original length sensor 1 SPF original length sensor SPF original width detection volume PWB Original size sensor PWB (Light receiving side) SPF open/close sensor SPF original exit sensor Mirror home position sensor --Name
9
Active condition
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-6
6. PWB
2 1 14 4 3
5 13 12 11 10 9
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 SPF control PWB Original size detection PWB (Light emitting side) CCD PWB (in lens unit) (The lens unit cannot be disassembled.) SPF original width detection volume PWB MFP operation PWB LCD inverter PWB LVDS PWB Original size sensor (Light receiving side) CIS unit (in CIS unit) (The CIS unit cannot be disassembled.) Scanner interface PWB CIS control PWB CL inverter PWB Scanner control PWB Name SPF control Original size detection when using the table glass Image scan (Table glass/SPF surface) SPF original width detection Panel operation control Inverter for LCD backlight LCD signal relay Original size detection when using the table glass Image scan (SPF back surface) Scanner unit and connection of scanner control PWB CIS unit control and image process Inverter for copy lamp Scanner unit control Function/Operation
6 7 8
CIS interface PWB (in CIS unit) (The CIS unit cannot be disassembled.) CIS signal AD conversion process
7. Motor, Clutch, Solenoid
# ! "
% $
No. 1 2 3 4 5 6 7 SPFM SPSC SPFC SDSS MIRM SPFS STMPS SPF motor SPF original resist clutch SPF original feed clutch SPF original stopper solenoid Mirror motor SPF original feed solenoid Stamp solenoid Name Function/Operation Original transport in SPF scan SPF original scan timing adjustment SPF original feed roller drive SPF original stopper gate drive Mirror base copy lamp base drive SPF original feed unit drive Finish stamp drive (Option AR-SU1 required) AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-7
[6] UNPACKING AND INSTALLATION
1. Installing procedure flowchart
There are many combinations between this machine and option units. For installing option units, observe the following procedures for efficiency. To install the devices effciently, follow the procedure below. Some peripheral devices may have been installed as standard devices depending on the main unit model. Part of descriptions and illustrations may be different.
Scanner/document feeder device Finishing device Finishing device Duplex/bypass device
Main unit
Finishing device
Main unit
Duplex device
Paper feeding device
Paper feeding device
Start of installation
Main unit.
unit,
paper
feeding
Install controller board, facsimile unit or other electric Controller board, facsimile unit or other electric devices installed? No devices. Yes
AR-M11 AR-NC5J AR-HD3 AR-FX5/AR-MM9 AR-PK1 AR-NS2 AR-NC5J
device, and power supply
AR-MU1/AR-DC1 AR-D13 /AR-DC1 AR-D14 /AR-DC1
Main unit
[Electrical setting/adjustment] Install duplex/pypass device. Duplex/bypass device installed? Yes AR-DU3 AR-DU4 1) Installation of driver software, setting, and operation check Main unit/AR-EF1/AR-M11/AR-NC5J/AR-HD3/ AR-FX5/AR-PK1/AR-NS2 No 2) Paper guide position adjustment/off center adjustment Install finishing device. Finishing device installed? Yes AR-MS1/AR-DC1 AR-FN6 /AR-DC1 AR-FN7 AR-PN1A / B / C / D No End
AR-MU1/AR-D13/AR-D14/ AR-DU3/AR-DU4
Extended memory
Scanner/document feeder installed?
Yes
Install scanner/document feeder.
* AR-M350/M450 only
When installing a paper feeding device, an optional power supply unit or a duplex/bypass device, be sure to reattach the rear cabinet, the AC inlet cover, and the harness cover of the main unit at the end of installation as needed. When installing a controller board, a facsimile unit, and other electric devices, be sure to install them at a time. Only off center adjustment is needed for AR-DU3.
4 For the FAX/scanner options, AR-M350/M450 only.
AR-EF1 /AR-RK1
No
*
For installation of an option unit, refer to the Service Manual of the option unit.
AR-M350 UNPACKING AND INSTALLATION 6-1
2. Note for installation place
Improper installation may damage this product. Please note the following during initial installation and whenever the machine is moved. 1) The machine should be installed near an accessible power outlet for easy connection. 2) Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. ·For the power supply requirements, see the name plate of the main unit. 3) Do not install your machine in areas that are: ·damp, humid, or very dusty ·exposed to direct sunlight ·poorly ventilated ·subject to extreme temperature or humidity changes, e.g., near an air conditioner or heater. 4) Be sure to allow the required space around the machine for servicing and proper ventilation.
4. Machine installing procedure
Note: In advance to installation of the machine, the paper feed option units (AR-D13 or AR-D14) should have been installed.
A. Removal of the machine
1) Remove the cushioning materials from the right and left of the front side.
11-13/16" (30cm) 31-1/2" (80cm) 23-5/8" (60cm)
2) Remove the locking tape from the right and left sidesof the tray. Then,Remove the top of the carton and lower the plastic bag covering the machine while the machine is still on the carton base.
3) Remove the packing tape from the paper tray, pull out the paper tray until it stops and remove it by tilting it upward.
23-5/8" (60cm)
3. Unpacking procedure
2 3 3
4) One person must lift by the empty front tray pocket with the right hand and steady the machine with the left hand placed at the upper left of the machine. The other person must lift with the right hand by using the lifting recess in the rear of the machine and also steady the machine with the left hand as shown in the illustration.
Front side
1 1 1 4
1 4
Check the following items are included in the package. Developer Toner cartridge for installation CD-ROM for AR-350/450 series printers Operating Manual Counter kit contract Note: The center of gravity of the machine lies in the left side when viewed from the Back of machine. When lifting the machine, be careful not to drop it.
1
Rear side
AR-M350 UNPACKING AND INSTALLATION 6-2
B. Installation of paper feed options to the machine
Note: Before use of this machine, one of the paper feed option units (AR-D13/AR-D14) should be installed to the machine for safety reasons. Refer to the drawing of the AR-MU1 in this manual. 1) Put the machine on the previously installed option unit. Be sure to check that the boss of the option unit is securely engaged with the machine and that the external lines (front and left sides) of the option unit and those of the machine are aligned completely.
<3>Reattach the paper tray of the main unit.
3) Remove the rear cabinet of the stand/paper drawer and remove the AC inlet cover. <1>Remove the four screws that fix the rear cabinet and then remove the rear cabinet.
Rear cabinet
Caution: For installation of the main unit, it must be held by two persons and installed without haste. 2) Connect the main unit to the stand/paper drawer. <1>Attach the rear mounting plates using a supplied screw for each.
Rear mounting plate
<2>Remove the screw that fixes the AC inlet cover and then remove the AC inlet cover. <3>Process the AC inlet cover as shown in the illustration.
Cut out.
Screw Rear mounting plate
Screw
AC inlet cover
Mounting plate
Desk frame
Caution: Insert the rear mounting plates under the desk frame. <2>Pull out the upper paper tray of the stand/paper drawer until it stops and attach the front mounting plates using a supplied screw for each. Then, remove the lock of the paper tray and close the tray. Remove the locks of the middle tray and the lower tray similarly.
4) Attach the power supply unit (AR-DC1). Attach the power supply unit to the hanging portions and secure it using the three supplied screws.
Hanging portion Hanging portion
Front mounting plate
Screw
Screws
Screws Power supply unit
Front mounting plate
Screw
AR-M350 UNPACKING AND INSTALLATION 6-3
5) Connect the power supply unit harness to the PCU PWB of the main unit of the printer. <1>Remove the screw that fixes the harness cover of the main unit of the printer and slide the harness cover up to remove it. Process the harness cover as shown in the illustration.
Screw
7) Attach the rear cabinet of the stand/paper drawer. <1>Pass the cord of the power supply unit through the hole of the rear cabinet and attach the rear cabinet to the stand/paper drawer.
Cut out.
Rear cabinet
Harness cover
<2>Connect the optional power supply harness connector to CN11 (red connector) of the PCU PWB of the main unit of the printer.
<2>Attach the AC inlet cover to the rear cabinet of the stand/paper drawer and fix it with the removed screw.
Connector
CN11
AC inlet cover
<3>Reattach the harness cover to its original position and fix it with the removed screw. At this time, ensure that the optional power supply unit harness is arranged as shown in the illustration. ·Fix the harness securely to the wire saddle.
Screw
Screw Optional power supply harness
8) Connect the AC cord of the power supply unit to the main unit of the printer. Connect the AC cord of the power supply unit to the outlet connector of the main unit of the printer at the location shown in the illustration.
Harness cover Wire saddle Wire saddle
AC cord
6) Connect the relay harness of the stand/paper drawer to the power supply unit. Connect the relay harness of the stand/paper drawer to the connector of the power supply unit.
Connector of the power supply connector
Relay harness of the stand/paper drawer
AR-M350 UNPACKING AND INSTALLATION 6-4
C. Setting related to process
1) Open the left door and the front door.
D. Toner cartridge settings
1) Remove a new toner cartridge from the package and shake it horizontally five or six times.
2) Remove the developer cartridge from the machine. 2) Insert a new toner cartridge. Push the cartridge in until it locks securely into place.
3) Remove the top cover of the developer cartridge. 3) Gently remove the sealing tape from the cartridge.
4) Return the cartridge lock lever. 4) While rotating the MG roller, supply developer into the developer cartridge evenly.B Note: Before opening the developer seal, shake it 4 or 5 times.
5) Attach the top cover to the developer cartridge and install the cartridge to the machine.
AR-M350 UNPACKING AND INSTALLATION 6-5
E. Setting related to fusing
1) Put down the right and the left levers of the fusing unit in the arrow direction.
5. AR-EF1 / AR-RK1
·For installation, an MFP control board (AR-M11) is needed.
Parts included for the rack
Cam A securing screw (M3 x 12) (1 pc.) Racks A (2 pcs.) Shaft (1 pc.)
Parts