Text preview for : Ux108S-GENERAL.pdf part of Sharp UX108-118S SHARP UX108-118S FAX Machine.part5



Back to : SHARP UX108-118S.part5.ra | Home

UX-108H UX-178H

CHAPTER 1. GENERAL DESCRIPTION
[1] Specifications
Automatic dialing: Fax paper: Rapid Key Dialing: 10 numbers Speed Dialing: 20 numbers Initial starter roll (included with fax machine): 10 m roll Recommended replacement roll: FO-40PR6(R) 50 m roll Automatic document feeder: 10 sheets max. Paper cutting method: Modem speed: Transmission time* : Display: Reception modes: Resolution: UX-108: Tear off by hand UX-178: Automatic cutter 9600 bps with automatic fallback to 7200, 4800, or 2400 bps Approx. 15 seconds 16-digit LCD display FAX, TEL, TEL/FAX, A.M. Horizontal: 8 dots/mm Vertical: Standard: 3.85 lines/mm Fine/Halftone: 7.7 lines/mm Super fine (transmission only) : 15.4 lines/mm Thermal recording 64 levels/16 levels Public switched telephone network/PBX ITU-T (CCITT) G3 mode Half-duplex, desktop transceiver Modified Huffman and Sharp special mode (MR/MH/UNIQUE) Sheet-feeder CIS (Contact Image Sensor) 210 mm max. Automatic feeding: Width 148 to 216 mm Length 140 to 297 mm Manual feeding: Width 148 to 216 mm Length 140 to 600 mm Dimensions: Effective scanning width: Contrast control: Copy function: Telephone function: 210 mm max. Automatic/Dark selectable Standard Standard (cannot be used for incoming/outgoing calls if power fails) 230 V AC, 50 Hz 5 to 35°C Maximum: 85 % Stand-by: 5.5 W Maximum: 120 W Width: 308 mm Depth: 256 mm Height: 138 mm Weight: * UX-108: Approx. 2.5 kg UX-178: Approx. 2.6 kg

Power requirements: Operating environment: Humidity: Power consumption:

Based on ITU-T (CCITT) Test Chart #1 at standard resolution in Sharp special mode, excluding time for protocol signals (i.e., ITU-T phase C time only).

Recording system: Halftone (grayscale): Applicable telephone line: Compatibility: Configuration: Compression scheme: Scanning method: Effective recording width: Input document size:

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for procduct improvement without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some deviation from these values in individual units.

1­1