Text preview for : Xerox DocuPrint n2025, n2825 Service Manual.pdf part of Ricoh Afficio 1018/1018D/1015 Service Manual
Back to : Xerox DocuPrint n2025, n2 | Home
XEROX
Xerox DocuPrint N2025/N2825 Network Laser Printer Service Manual
CAUTION
These components are susceptible to electrostatic discharge. Observe all ESD procedures to avoid damage.
721P52440 February 2000
This Service Manual contains information that applies to the DocuPrint N2025/N2825 Laser Printer.
Copyright
This Service Manual contains information that applies to the DocuPrint N2025/N2825 Electronic Laser Printer.
Copyright 2000 by Xerox Corporation. Xerox, DocuPrint N2025/N2825 are registered trademarks of Xerox Corporation. Copyright 2000 Xerox Corporation. All rights reserved. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. Xerox, and all product names and product numbers mentioned in this publication are trademarks. Adobe and PostScript are trademarks of Adobe Systems Incorporated. PCL, HP LaserJet, and Intellifont are trademarks of Hewlett-Packard Company. IBM is a trademark of International Business Machines Corporation. Microsoft, Microsoft Windows, Microsoft Word, MS, and MS-DOS are trademarks of Microsoft Corporation. Univers is a trademark of Linotype AG or its subsidiaries. WordPerfect is a trademark of WordPerfect Corporation. Centronics is a trademark of Centronics Corporation. Macintosh and TrueType are trademarks of Apple Computer, Incorporated. All other product names are trademarks/ tradenames of their respective owners. PCL, PCL 5e, and PCL 6 are trademarks of Hewlett Packard Company. This printer contains an emulation of the Hewlett Packard PCL 5e or PCL 6 command language, recognizes HP PCL 5e or HP PCL 6 commands, and processes these commands in a manner compatible with Hewlett Packard LaserJet printer products.
NOTICE
This manual is for use by Xerox Technicians and Xerox trained technicians only.
NOTICE
While every care has been taken in the preparation of this manual, no liability will be accepted by Xerox arising out of any inaccuracies or omissions. All service documentation is supplied to Xerox external customers for informational purposes only. Xerox service documentation is intended for use by certified, product trained service personnel only. Xerox does not warrant or represent that such documentation is complete. Nor does Xerox represent or warrant that it will notify or provide to such customer any future changes to this documentation. Customer's service of equipment, or modules, components, or parts of such equipment may void any otherwise applicable Xerox warranties. If Customer services such equipment, modules, components, or parts thereof, Customer releases Xerox from any and all liability for Customer's actions, and Customer agrees to indemnify, defend, and hold Xerox harmless from any third party claims which arise directly or indirectly from such service. Prepared by: Maak 1 105 Loudoun Street S.W. Leesburg, VA. 20175-2910 Prepared for: Network Printers Business Unit Customer and Marketing Focus 701 South Aviation Blvd. El Segundo, California 90245
XL is a trademark of Xiontics.
Warning
This equipment complies with the requirements in Part 15 of FCC rules for a class A computing device. Operation of the equipment in a residential area may cause unacceptable interference to radio and TV reception, requiring the operator to take whatever steps are necessary to correct the interference.
Copyright
02/2000 ii
Initial Issue
DocuPrint N2025/N2825
Electrostatic Discharge
This caution indicates that there are components which are sensitive to damage caused by electrostatic discharge.
Class 1 LASER Product
The DocuPrint N2025/N2825 laser printers are certified to comply with Laser Product Performance Standards set by the U.S. Department of Health and Human Services as a Class 1 Laser Product. This means that this is a class of laser product that does not emit hazardous laser radiation; this is possible only because the laser beam is totally enclosed during all modes of customer operation. The laser and output of the laser scanner unit produces a beam that, if looked into, could cause eye damage. Service procedures must be followed exactly as written without change. When servicing the machine or laser module, follow the procedures specified in the manual and there will be no hazards from the laser. Laser (FDA): Any laser label visible to service must be reproduced in the service manual with location shown or indicated. Safe working procedures and clear warnings concerning precautions to avoid possible exposure must also be included. The Laser contained in the DocuPrint N2025/N2825 meets the following standard: Laser class 3B, maximum 5mW, wavelength 780nm. The following LASER symbol will be displayed at the start of any procedure where possible exposure to the laser beam exists.
CAUTION
These components are susceptible to electrostatic discharge. Observe all ESD procedures to avoid damage.
Shock Hazard This symbol indicates the presence of potentially hazardous voltages.
FM_001
Fuser Hazard This symbol indicates the presence of extreme heat from the Fuser Assembly.
LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT
Initial Issue
DocuPrint N2025/N2825
02/2000 iii
Electrostatic Discharge
Table of Contents
Title - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Page Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - iv Organization - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - v Revision Control List - - - - - - - - - - - - - - - - - - - - - - - - - - viii Service Call Procedures - - - - - - - - - - - - - - - - - - - - - - - - 1-1
Section Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1
Introduction
The DocuPrint N2025/N2825 Service Manual is the primary document used for repairing and maintaining the DocuPrint N2025/N2825 Laser Printers. This manual contains Service Call Procedures, Diagnostic Procedures, General Information, Repair Analysis Procedures, Image Quality Analysis Procedures, Wiring Data, and Parts Lists that will enable the Service Representative to repair DocuPrint N2025/N2825 failures.
Repair Analysis Procedures - - - - - - - - - - - - - - - - - - - - - 2-1
Section Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1
Image Quality Repair Procedures - - - - - - - - - - - - - - - - - 3-1
Section Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1
Repair/Adjustments - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1
Section Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1
Parts List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1
Section Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1
General Procedures - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1
Section Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1
Wiring Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-1
Section Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-1
Table of Contents
02/2000 iv
Initial Issue
DocuPrint N2025/N2825
Organization
This manual is divided into seven sections. The title and description of each section of the manual is as follows:
Section 7 - Wiring Data
This section contains sensor, connector, and PWB location drawings; power distribution diagrams, interconect diagrams, interconnect diagrams and pin assignment information. This information is not specific to individual procedures but is provided for general reference.
Section 1 - Service Call Procedures
This section is used to identify a suspected problem. It contains Machine Orientation, Call Flow, Initial Actions, Corrective Actions, and Final Actions. This part of the service manual should always be used to start the service call.
Section 2 - Repair Analysis Procedures
This section is used to isolate and identify problems to a faulty component or subassembly. It contains the introduction, display message table, error code tables and the Repair Analysis Procedures (RAPs).
Section 3 - Image Quality
This section contains image quality repair procedures to assist in correcting image quality defects. These procedures provide defect samples and definitions to help identify the type of defect that exists, the test pattern to use, and actions required to correct the defects.
Section 4 - Repair / Adjustment
This section contains the instructions for removal, replacement, and adjustment of the spared parts within the machine.
Section 5 - Parts Lists
This section contains illustrations of disassembled subsystems and a listing of the spared parts. Part names are listed in this section of the manual even if the part itself is not spared. All the parts that are spared will have the part number listed. Parts that are not spared will not have a number listed.
Section 6 - General Procedures
This section includes the Operations Menu Map and the Service Mode Menu Map. It includes all unique service operations, supplemental tools and supplies. Initial Issue
DocuPrint N2025/N2825
02/2000 v
Organization
Terminology and Symbols
The following is the terminology and symbols that are used in this manual for Warnings, Electrostatic Device or General Cautions, and Notes.
Shock Hazard
This symbol indicates the presence of potentially hazardous voltages.
Warning
This equipment complies with the requirements in Part 15 of FCC rules for a class A computing device. Operation of the equipment in a residential area may cause unacceptable interference to radio and TV reception, requiring the operator to take whatever steps are necessary to correct the interference.
FM_001
Fuser Hazard
This symbol indicates the presence of extreme heat from the Fuser Assembly.
Electrostatic Discharge
The following symbols indicates that there are components which are sensitive to damage caused by electrostatic discharge.
Terminology and Symbols
02/2000 vi
Initial Issue
DocuPrint N2025/N2825
Laser Product Certification
CAUTION
Use of controls or adjustments other than those specified in this manual may result in an exposure to dangerous laser radiation. The DocuPrint N2025/N2825 is certified to comply with Laser Product Performance Standards set by the United States Department of Health and Human Services as a Class 1 product. This means that it is a laser product that does not emit dangerous laser radiation during any mode of customer operation. During servicing, the laser beam could cause eye damage if looked at directly. Service procedures must be followed exactly as written without change.
CAUTION
These components are susceptible to electrostatic discharge. Observe all ESD procedures to avoid damage.
Initial Issue
DocuPrint N2025/N2825
02/2000 vii
Laser Product Certification
Product: DocuPrint N2025/N2825 Laser Printer
Title: Xerox DocuPrint N2025/N2825 Network Laser Printer Service Manual
Part Number: 721P52440
Page
Revision
Page 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27 2-28 2-29 2-30 2-31 2-32 2-33 2-34 2-35 2-36 2-37 2-38 2-39 2-40 2-41 2-42 2-43 2-44 2-45 2-46 2-47 2-48 2-49 2-50
Revision - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000
Page
Revision
Page
Revision 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000
Page
Revision 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000
Page 4-62 4-63 4-64 4-65 4-66 4-67 4-68 4-69 4-70 4-71 4-72 4-73 4-74 4-75 4-76 4-77 4-78 4-79 4-80 4-81 4-82 4-83 4-84 4-85 4-86 4-87 4-88 4-89 4-90 4-91 4-92 4-93 4-94 4-95 4-96
Revision ----------------------------------------------------------------------2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000
Title - - - -2/2000 ii - - - - - - -2/2000 iii - - - - - -2/2000 iv - - - - - -2/2000 v - - - - - - -2/2000 vi - - - - - -2/2000 vii - - - - - -2/2000 viii- - - - - -2/2000 ix - - - - - -2/2000 x - - - - - - -2/2000 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 - - - - -2/2000 - - - - -2/2000 - - - - -2/2000 - - - - -2/2000 - - - - -2/2000 - - - - -2/2000 - - - - -2/2000 - - - - -2/2000
2-51 - - - - 2/2000 2-52 - - - - 2/2000 2-53 - - - - 2/2000 2-54 - - - - 2/2000 2-55 - - - - 2/2000 2-56 - - - - 2/2000 2-57 - - - - 2/2000 2-58 - - - - 2/2000 2-59 - - - - 2/2000 2-60 - - - - 2/2000 2-61 - - - - 2/2000 2-62 - - - - 2/2000 2-63 - - - - 2/2000 2-64 - - - - 2/2000 2-65 - - - - 2/2000 2-66 - - - - 2/2000 3-1 - - - - - 2/2000 3-2 - - - - - 2/2000 3-3 - - - - - 2/2000 3-4 - - - - - 2/2000 3-5 - - - - - 2/2000 3-6 - - - - - 2/2000 3-7 - - - - - 2/2000 3-8 - - - - - 2/2000 3-9 - - - - - 2/2000 3-10 - - - - 2/2000 3-11 - - - - 2/2000 3-12 - - - - 2/2000 3-13 - - - - 2/2000 3-14 - - - - 2/2000 3-15 - - - - 2/2000 3-16 - - - - 2/2000 3-17 - - - - 2/2000 3-18 - - - - 2/2000
02/2000 viii
3-19 - - - 3-20 - - - 3-21 - - - 3-22 - - - 3-23 - - - 3-24 - - - 3-25 - - - 3-26 - - - 4-1- - - - 4-2- - - - 4-3- - - - 4-4- - - - 4-5- - - - 4-6- - - - 4-7- - - - 4-8- - - - 4-9- - - - 4-10 - - - 4-11 - - - 4-12 - - - 4-13 - - - 4-14 - - - 4-15 - - - 4-16 - - - 4-17 - - - 4-18 - - - 4-19 - - - 4-20 - - - 4-21 - - - 4-22 - - - 4-23 - - - 4-24 - - - 4-25 - - - 4-26 - - - -
2-1 - - - - -2/2000 2-2 - - - - -2/2000 2-3 - - - - -2/2000 2-4 - - - - -2/2000 2-5 - - - - -2/2000 2-6 - - - - -2/2000 2-7 - - - - -2/2000 2-8 - - - - -2/2000 2-9 - - - - -2/2000 2-10 - - - -2/2000 2-11 - - - -2/2000 2-12 - - - -2/2000 2-13 - - - -2/2000 2-14 - - - -2/2000 2-15 - - - -2/2000 Initial Issue
DocuPrint N2025/N2825
4-27- - - 4-28- - - 4-29- - - 4-30- - - 4-31- - - 4-32- - - 4-33- - - 4-34- - - 4-35- - - 4-36- - - 4-37- - - 4-38- - - 4-39- - - 4-40- - - 4-41- - - 4-42- - - 4-43- - - 4-44- - - 4-45- - - 4-46- - - 4-47- - - 4-48- - - 4-49- - - 4-50- - - 4-51- - - 4-52- - - 4-53- - - 4-54- - - 4-55- - - 4-56- - - 4-57- - - 4-58- - - 4-59- - - 4-60- - - 4-61- - - -
Revision Control List
Page
Revision
Page 6-13 6-14 6-15 6-16 6-17 6-18 6-19 6-20 6-21 6-22 6-23 6-24 6-25 6-26 6-27 6-28 6-29 6-30 6-31 6-32 6-33 6-34 6-35 6-36 6-37 6-38 6-39 6-40 6-41 6-42 6-43 6-44 6-45 6-46 6-47 6-48 6-49 6-50 6-51 6-52
Revision - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000 - - - - 2/2000
Page
Revision
Page
Revision 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000
Page 7-34- - - 7-35- - - 7-36- - - 7-37- - - 7-38- - - 7-39- - - 7-40- - - 7-41- - - 7-42- - - 7-43- - - 7-44- - - 7-45- - - 7-46- - - 7-47- - - 7-48- - - -
Revision 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000 2/2000
Page
Revision
5-1 - - - - -2/2000 5-2 - - - - -2/2000 5-3 - - - - -2/2000 5-4 - - - - -2/2000 5-5 - - - - -2/2000 5-6 - - - - -2/2000 5-7 - - - - -2/2000 5-8 - - - - -2/2000 5-9 - - - - -2/2000 5-10 - - - -2/2000 5-11 - - - -2/2000 5-12 - - - -2/2000 5-13 - - - -2/2000 5-14 - - - -2/2000 5-15 - - - -2/2000 5-16 - - - -2/2000 5-17 - - - -2/2000 5-18 - - - -2/2000 5-19 - - - -2/2000 5-20 - - - -2/2000 5-21 - - - -2/2000 5-22 - - - -2/2000 5-23 - - - -2/2000 5-24 - - - -2/2000 5-25 - - - -2/2000 5-26 - - - -2/2000 6-1 - - - - -2/2000 6-2 - - - - -2/2000 6-3 - - - - -2/2000 6-4 - - - - -2/2000 6-5 - - - - -2/2000 6-6 - - - - -2/2000 6-7 - - - - -2/2000 6-8 - - - - -2/2000 6-9 - - - - -2/2000 6-10 - - - -2/2000 6-11 - - - -2/2000 6-12 - - - -2/2000
6-53 - - - - 2/2000 6-54 - - - - 2/2000 6-55 - - - - 2/2000 6-56 - - - - 2/2000 6-57 - - - - 2/2000 6-58 - - - - 2/2000 6-59 - - - - 2/2000 6-60 - - - - 2/2000 6-61 - - - - 2/2000 6-62 - - - - 2/2000 6-63 - - - - 2/2000 6-64 - - - - 2/2000 6-65 - - - - 2/2000 6-66 - - - - 2/2000 6-67 - - - - 2/2000 6-68 - - - - 2/2000 6-69 - - - - 2/2000 6-70 - - - - 2/2000 6-71 - - - - 2/2000 6-72 - - - - 2/2000 6-73 - - - - 2/2000 6-74 - - - - 2/2000 6-75 - - - - 2/2000 6-76 - - - - 2/2000 6-77 - - - - 2/2000 6-78 - - - - 2/2000 6-79 - - - - 2/2000 6-80 - - - - 2/2000 6-81 - - - - 2/2000 6-82 - - - - 2/2000 6-83 - - - - 2/2000 6-84 - - - - 2/2000 6-85 - - - - 2/2000 6-86 - - - - 2/2000 6-87 - - - - 2/2000 6-88 - - - - 2/2000 6-89 - - - - 2/2000 6-90 - - - - 2/2000 6-91 - - - - 2/2000 6-92 - - - - 2/2000
02/2000 ix
6-93 - - - 6-94 - - - 6-95 - - - 6-96 - - - 6-97 - - - 6-98 - - - 7-1- - - - 7-2- - - - 7-3- - - - 7-4- - - - 7-5- - - - 7-6- - - - 7-7- - - - 7-8- - - - 7-9- - - - 7-10 - - - 7-11 - - - 7-12 - - - 7-13 - - - 7-14 - - - 7-15 - - - 7-16 - - - 7-17 - - - 7-18 - - - 7-19 - - - 7-20 - - - 7-21 - - - 7-22 - - - 7-23 - - - 7-24 - - - 7-25 - - - 7-26 - - - 7-27 - - - 7-28 - - - 7-29 - - - 7-30 - - - 7-31 - - - 7-32 - - - 7-33 - - - -
Initial Issue
DocuPrint N2025/N2825
Revision Control List
Page
Revision
Page
Revision
Page
Revision
Page
Revision
Page
Revision
Page
Revision
Initial Issue
DocuPrint N2025/N2825
02/2000 x
Revision Control List
1 Service Call Procedures
1.0 Introduction ............................................................................................................... 1.1 Machine Orientation .................................................................................................. 1.2 Call Flow ................................................................................................................... 1.3 Initial Actions ............................................................................................................. 1.4 Corrective Actions ..................................................................................................... 1.5 Final Actions.............................................................................................................. 1-3 1-3 1-4 1-5 1-5 1-8
Initial Issue DocuPrint N2025/N2825
02/2000 1-1
Service Call Procedures
Service Call Procedures
02/2000 1-2
Initial Issue DocuPrint N2025/N2825
1.0 Introduction
The Service Call Procedures section is used to identify a suspected problem. This section contains Call Flow, Initial Actions, Corrective Actions, and Final Actions. Call Flow illustrates the normal activities and flow of a service call. Initial Actions are used to gather information regarding the performance of the machine and prepare the product for servicing. Corrective Actions are used to verify the normal operation of the machine. In the Y/N (Yes/No) steps of the corrective actions, a Yes response will lead you to the next step. A No response will indicate the next step to perform or will direct you to a Repair Analysis Procedure (RAP). RAPs will provide the instructions to isolate the faulty part or provide a list of suspect parts, when isolation is not appropriate. Wire harnesses are not included in the repair actions and problems with loose connections or damaged harnesses should be isolated using visual inspection and the wiring data in section 7. Final Actions are used to evaluate the total operation of the system and to identify the actions required to complete the service call.
1.1 Machine Orientation
For servicing the DocuPrint N2025/N2825, all references to machine orientation are as illustrated in Figure 1.
Figure 1 Machine Orientation
Initial Issue DocuPrint N2025/N2825
02/2000 1-3
Service Call Procedures
1.0, 1.1
1.2 Call Flow
The call flow diagram shows the relationship of actions during a typical service call Figure 1. The functions in Call Flow correspond to service manual sections as follows: Section 1 - Initial Actions, Corrective Actions, and Final Actions Section 2 - Status Indicator Repair Analysis Procedures (RAPs) Section 3 - Image Quality Repair Analysis Procedures (IQ RAPs) Section 4 - Repair / Adjustment (REPs) Section 5 - Parts Lists (PLs) Section 6 - General Procedures Section 7 - Wiring All service calls start with Initial Actions and all service calls end with Final Actions.
Figure 1 Call Flow Diagram
Service Call Procedures
1.2
02/2000 1-4
Initial Issue DocuPrint N2025/N2825
1.3 Initial Actions
Initial Actions are used to gather information from the operator concerning problems at the local machine. Make note of symptoms, error messages, error codes or other information concerning the problem that the operator may provide. This information may help identify an intermittent or unusual problem. Procedure 1. 2. 3. 4. 5. 6. 7. 8. 9. Ensure that the power cord is connected to the wall outlet and to the machine. Check for paper or other objects in the paper path. Remove all paper from the output tray(s). The Rear Cover and Top Cover are closed. The paper is loaded correctly in the Paper Tray(s). Ask the operator to describe, or if possible, demonstrate the problem. If the problem is the result of incorrect operator action, refer the operator to the User documentation or to another customer support function. Refer to Section 2 if an error message is displayed. If possible, print the "Configuration Sheet". To print the Configuration Sheet, press and release [1] or [5] until "Print Menu" is displayed. Then press and release [2] or [6] until "Config Sheet" is displayed. Press Enter [4] to print the sheet. If the sheet is blank, go to IQ RAP 2.
1.4 Corrective Actions
Procedure
Ensure that Initial Conditions are met and that the Initial Actions have been completed. Switch the main power off, wait 10 seconds, then switch the main power on. The Main Drive Motor runs. Y N Perform RAP 2. The display indicates an upper row of 16 solid squares that remain on for 1 second (Figure 1). The display is correct. Y N If machine indicates an error message, see the Error Code Table in section 2. If the display is blank or has garbled text, perform RAP 25. The Main Drive Motor runs for 8 seconds, then stops. Y N Perform RAP 16. The Fuser Fan runs at high speed for 5 seconds, then switches to low speed. Y N Perform RAP 20. The LCD Panel will come on again and display "Power On" and the Power On Diagnostic (POD) software "Version x.xxx" (Figure 2). The display is correct. Y N Perform RAP 25/ RAP 26. The Control Panel LEDs 1, 2, 3, and 4 turn on momentarily then turn off (blink). Y N Perform RAP 25/ RAP 26. The display comes on and (*) shows in the upper row (Figure 3). The display is correct. Y N Perform RAP 25/ RAP 26. A row of (*) (16) form across the top of the display (Figure 4). The display indications are correct. Y N Perform RAP 25/ RAP 26. A second row of (*) (16) form across the bottom of the display (Figure 5). The display indications are correct. Y N Perform RAP 25/ RAP 26. Control Panel LED 1 comes on and remains on. Y N Perform RAP 25/ RAP 26. The LCD Panel now displays the Controller Software and Version level (x.xx-xx) (Figure 6). The display indications are correct.
10. Determine that the configuration settings are correct. 11. If possible, print the "Fault History". To print the "Fault History" press and release [1] or [5] until "Print Menu" is displayed. Then press and release [2] or [6] until "Fault History" is displayed. Next, press Enter [4] to print the sheet. The Fault History will list the error codes and the meter count when the event happened. Use the Fault History to determine the frequency of a problem. Access the Error Code Tables (Table 1 or Table 2) and perform the corrective action as instructed. 12. If the Fault History can not be printed, the fault history can be displayed on the Control Panel. To display the "Fault History" press and release [1] or [5] until "Print Menu" is displayed. Then press and release [2] or [6] until "Display Faults" is displayed. Next, press press [3] to display the last fault that occurred. Continue to press and release [3] to display the error codes in order from the newest to the oldest. Pressing and releasing the [4] key will display the codes in order from the oldest to the newest. The Display Faults will display the error code and the meter count when the event happened. An example of the display "E9-2 #820", where E9-2 is the error code and #820 is the meter count. 13. Proceed to Corrective Actions.
Initial Issue DocuPrint N2025/N2825
02/2000 1-5
Service Call Procedures
1.3, 1.4
Y
N Perform RAP 25/ RAP 26.
The Controller Software Version switches off and the display shows "Initializing . . ." (Figure 7). The display is correct. Y N Perform RAP 25/ RAP 26. The display now shows "Copyright Xerox Corp." (Figure 8). The display is correct. Y N Perform RAP 25/ RAP 26. Next, "1996-1999 All Rights Reserved" is displayed on the LCD Panel (Figure 9). The display is correct. Y N Perform RAP 25/ RAP 26. Next, "Processing. . ." is displayed on the LCD Panel(Figure 10). The display is correct. Y N Perform RAP 25/ RAP 26. The final display is "Ready". The display is correct. Y N Perform RAP 25/ RAP 26. Press [1] twice to select "Print Menu", then press and release [2] until "Menu Map" is displayed. Press Enter [4] to print the "Menu Map". First, "Processing Menu Map" is displayed, immediately followed by "Processing Tray X". The display is correct. Y N Perform RAP 25/ RAP 26. When the Main Driver Motor runs, the motor and all drive gears sound normal. Y N Perform RAP 29. Paper is fed from the paper tray to the Registration Roller and is undamaged. Y N Perform RAP 8. The paper feeds out of the machine and is undamaged. Y N Perform RAP 10/ RAP 11. The print contains readable text. Y N If the print is black or blank perform IQ RAP 10 or IQ RAP 2. If the text is garbled, Perform RAP 44.
A Enter Diagnostics and select "Print Menu". Scroll to "Test Print". Feed at least 5 test prints from all available trays to the Standard output tray. Test prints were successfully delivered from each tray. Y N If the failure occurred with: MBF. Go to RAP 41. Tray 1. Go to RAP 49. Tray 2/3. Go to RAP 7. 2000 Sheet Feeder. Go to RAP 62. If the Duplex Assembly is installed, select "Duplex On" press Enter [4]. Run at least 5 duplexed prints. If a Duplex Assembly is not installed, follow the "Y" path. The prints were delivered successfully. Y N Go to RAP 56. If a Offset Catch Tray (OCT) is installed, select "OCT" and run at least 5 prints to the OCT. If an OCT is not installed, follow the "Y" path. Prints were successfully delivered to the OCT. Y N Go to RAP 68. Ensure that all normal printer conditions are set i.e. paper loaded, machine in Ready condition, internet cable connected. Have the customer send a document to the printer. The print is successful. Y N Try a sending a document from a different application. The print was successful. Y N There may be a problem with the print drivers. Have the customer contact Xerox Customer Support. There may be a problem with the application software. Have the customer contact Xerox Customer Support. Go to Final Actions.
Figure 1
Figure 2 The print quality of the Menu Map is acceptable. Y N Perform Image Quality Checkout. A Service Call Procedures
1.4
02/2000 1-6
Initial Issue DocuPrint N2025/N2825
Figure 3
Figure 9
Figure 4
Figure 10
Figure 5
Figure 11
Figure 6
Figure 7
Figure 12
Figure 8
Initial Issue DocuPrint N2025/N2825
02/2000 1-7
Service Call Procedures
1.4
1.5 Final Actions
Procedure 1. 2. 3. 4. 5. 6. 7. 8. Switch the main power off. Update the tag matrix as required. Reinstall all the covers removed during the service call and complete all required administrative tasks. Clean the covers and ensure all labels are readable. Switch the printer power on. If any of the customer selections were changed return them to the customer's preferred settings. Run final prints and verify image quality. For Image Quality problems, go to section 3. Clean the general area. Communicate with the customer to inform them of actions taken and to ensure all problems have been solved.
Service Call Procedures
1.5
02/2000 1-8
Initial Issue DocuPrint N2025/N2825
2 Status Indicator Repair Analysis Procedures
Introduction ..................................................................................................................... Measurements ................................................................................................................ 2-3 2-3 2-5 2-11 2-12 2-13 2-14 2-15 2-16 2-16 2-17 2-18 2-18 2-19 2-20 2-21 2-21 2-22 2-22 2-23 2-23 2-24 2-24 2-25 2-25 2-26 2-27 2-28 2-29 2-29 2-30 2-31 2-32 2-33 2-34 2-34 2-35 2-36 2-37 2-38 2-39 2-40 2-41 2-41
Error Code Table
Error Code Table.............................................................................................................
Base Printer
RAP 1 AC Power............................................................................................................. RAP 2 DC Power ............................................................................................................ RAP 3 DC Power Loading............................................................................................... RAP 4 C3: Tray Error / Insert Tray 1,2,3......................................................................... RAP 5 C5: Add Paper To MBF, Tray 1, 2 or 3)............................................................... RAP 6 C5: Top Tray Full ................................................................................................. RAP 7 E1: Paper Jam / Tray To Registration. ................................................................ RAP 8 E2-1: Paper Jam / Misfeed .................................................................................. RAP 9 E2-2: Paper Jam/ Misfeed Duplex ....................................................................... RAP 10 E3: Paper Jam / Registration To Fuser ............................................................. RAP 11 E4: Paper Jam / Exit .......................................................................................... RAP 12 System Controller Isolation................................................................................ RAP 13 J3: Print Cartridge Not In Position - Install/reset Print Cartridge........................ RAP 14 J5: Toner Low .................................................................................................... RAP 15 P1: Fuser Pause ................................................................................................ RAP 16 U1: Motor Fail / Power Off Then On .................................................................. RAP 17 U2: ROS Fail / Power Off Then On.................................................................... RAP 18 U4: Fuser Failure / Power Off / On .................................................................... RAP 19 U6: NVM Fail / Power Off Then On ................................................................... RAP 20 Fan Abnormal .................................................................................................... RAP 21 Low Paper Tray 1/2/3 ........................................................................................ RAP 22 Paper Size Error ................................................................................................ RAP 23 J5 Toner Low ..................................................................................................... RAP 24 Inoperative Printer ............................................................................................. RAP 25 Malfunctioning LCD/LED ................................................................................... RAP 26 Inoperative Keypad............................................................................................ RAP 27 Erratic Printer Operation .................................................................................... RAP 28 Power Supply..................................................................................................... RAP 29 Main Motor Assembly ........................................................................................ RAP 30 Laser Assembly ................................................................................................. RAP 31 Fuser Assembly ................................................................................................. RAP 32 Registration Sensor ........................................................................................... RAP 33 MBF No Paper Sensor....................................................................................... RAP 34 Tray 1 No Paper Sensor .................................................................................... RAP 35 Stack Full Sensor............................................................................................... RAP 36 E5: MBF Extended / Insert MBF ........................................................................ RAP 37 Size Switch ........................................................................................................ RAP 38 Registration Clutch ............................................................................................ RAP 39 Turn Roll Clutch Assembly ................................................................................ RAP 40 Tray 1 Feed Solenoid ........................................................................................ RAP 41 MBF Feed Solenoid ...........................................................................................
RAP 42 Toner Sensor Assembly..................................................................................... RAP 43 HVPS Assembly................................................................................................. RAP 44 Electrical Noise .................................................................................................. RAP 45 0101 - DIMM 1 ................................................................................................... RAP 46 0102 - DIMM 2 ................................................................................................... RAP 47 0101 - DIMM 3 ...................................................................................................
2-42 2-42 2-43 2-44 2-45 2-45 2-47 2-47 2-48 2-49 2-50 2-51 2-52 2-52 2-53 2-55 2-56 2-56 2-57 2-59 2-59 2-60 2-60 2-61 2-61 2-62 2-63 2-64 2-64 2-65 2-65 2-66
500 Sheet Feeder
RAP 48 Exit Sensor......................................................................................................... RAP 49 E2-1: Paper Jam / Misfeed 500 Sheet Feeder................................................... RAP 50 Low Paper Tray 2 (or Tray 3) 500 Sheet Feeder ............................................... RAP 51 500 Sheet Feeder Feed Solenoid ...................................................................... RAP 52 500 Sheet Feeder Assembly Not Recognized ................................................... RAP 53 500 Sheet Feeder Feed Motor........................................................................... RAP 54 C3: Tray Out / Install Tray 2 (or Tray 3) ............................................................. RAP 55 Pre-Registration Sensor..................................................................................... RAP 56 C5: Add Paper To Tray 2 (or Tray 3) .................................................................
Duplex Unit
RAP 57 E7: Duplex Jam.................................................................................................. RAP 58 E5: Top/R Cover ................................................................................................ RAP 59 C5: Output Tray Full........................................................................................... RAP 60 Duplex Fail .........................................................................................................
2000 Sheet Feeder
RAP 61 C5: Wrong Size For Duplex ............................................................................... RAP 62 E2-1:Paper Jam/Misfeed 2000 Sheet Feeder.................................................... RAP 63 C3: 2000 Sheet Feeder Carriage Not In Position .............................................. RAP 64 C5: Add Paper To 2000 Sheet Feeder .............................................................. RAP 65 E5: 2000 Sheet Feeder CVR Open / Please Close CVR................................... RAP 66 E9:HCF Fail (2000 Sheet Feeder) ..................................................................... RAP 67 C5: OCT Tray Full..............................................................................................
Offsetting Catch Tray
RAP 68 E8: OCT Jam ..................................................................................................... RAP 69 E5: OCT CVR Open / Please Close CVR.......................................................... RAP 70 OCT Motor Assembly......................................................................................... RAP 71 E9: OCT Fail ...................................................................................................... RAP 72 Offset Operation Not Performed ........................................................................ RAP 73 OCT Sensor .......................................................................................................
Initial Issue DocuPrint N2025/N2825
02/2000 2-1
Status Indicator Repair Analysis Procedures
Status Indicator Repair Analysis Procedures
02/2000 2-2
Initial Issue DocuPrint N2025/N2825
Introduction
The Repair Analysis Procedures section is used to isolate and identify problems to a faulty component or subassembly. It contains the Introduction, display message table, error code table and the Repair Analysis Procedures (RAPs). Use the Display Messages and Error Codes tables when messages are displayed or error codes are printed in a report. The Repair Analysis Procedures (RAPs) are accessed from Section 1, system checks or additional checks. There are two types of RAPs: Status Indicator (SI) RAPs, contained in this section, and Image Quality (IQ) RAPs, located in Section 3. RAPs will normally isolate a problem to a specific component or subassembly, excluding the wire harnesses. In the Y/N (Yes/No) steps of the RAPs, a Yes/No response will either lead you to the next step or will indicate a corrective action. When the indicated corrective action has been completed, go to Section 1 and restart the System Check to verify that the problem has been corrected.
Measurements
Power and signal grounds are connected to frame ground, therefore all circuit troubleshooting can be performed using the metal frame (chassis) as the grounding point. If more information is needed to locate connectors or test points, refer to section 7. Unless otherwise specified, the following voltage tolerances are used within this section: Table 1 Table 1 Voltage Measurements Stated +3.3 VDC +5.0 VDC +24.0 VDC 0.0 VDC Measured +3.0 to 3.6 VDC +4.8 to +5.2 VDC +21.6 to +26.4 VDC Less than +0.5 VDC
Initial Issue DocuPrint N2025/N2825
02/2000 2-3
Status Indicator Repair Analysis Procedures
Introduction, Measurements
Status Indicator Repair Analysis Procedures
Introduction, Measurements
02/2000 2-4
Initial Issue DocuPrint N2025/N2825
Error Code Table
Table 1 Error Code Table Comments On LIne Message IOT NVM Fail Power Off/On Fault History Entry U6 Diagnostic Message U6: NVM Fail Error Description 1. 2. Motor Failure Power Off/On Laser Failure Power Off/On U1 U2 U1: Motor Fail U2: ROS Fail A read error is detected during power on. A write error is detected during write to the Nonvolatile Memory. Power Off and On Go to RAP 16 Action Power Off and On Go to RAP 19
Motor Fail signal is declared 0.75 seconds after start of Main Motor. 1.
Laser Signal intervals are longer Power Off and On than the Ready time interval 20 sec- Go to RAP 17 onds after the start of Laser warm up. The laser power does not reach the value in NVM when the laser diode is switched on after the start of Laser warm up. Laser signal intervals become longer than the Fail time interval after Laser warm up is completed. Fuser temperature drops below the Power Off and On set temperature after the Fuser Go to RAP 18 warm up is complete. Fuser warm up does not complete within 110 seconds. Thermistor circuit is detected to be open. Fuser temperature rises above the set temperature. Heat rod is on for 10 seconds when the Main Drive Motor is stopped, after the Fuser warm up is completed. Fuser Fan has failed. LVPS Fan has failed. Check the Fuser Fan and the LVPS Fan. Power Off and On Go to RAP 20 Close OCT rear door Go to RAP 69 Close 2000 sheet feeder rear cover Go to RAP 65 Close 2000 sheet feeder rear cover Go to RAP 65
2.
3.
Fuser Failure Power Off/On
U4: Fuser Fail
1.
2. 3. 4. 5.
Fan Failure Power Off Now
U5
U5: Fan Fail
1. 2.
Close Offset Door 2000 Sheet Feeder Close Tray 2 installed as Tray 2 Rear 2000 Sheet Feeder Close Tray 3 installed as Tray 3 Rear
E5: OCT Rear Door E5: HCF Cover
OCT rear door interlock switch is open. 2000 Sheet Feeder rear cover interlock switch is open 2000 Sheet Feeder rear cover interlock switch is open
E5: HCF Cover
Initial Issue DocuPrint N2025/N2825
02/2000 2-5
Status Indicator Repair Analysis Procedures
Error Code Table
Table 1 Error Code Table Comments On LIne Message Close Covers Fault History Entry Diagnostic Message E5: Top/R Cover Error Description 1. 2. Insert MBF Install Print Cartridge E5: MBF Extend J3: EP Cartridge Top cover interlock is open. Rear cover interlock is open. Action Close Top Cover Close Rear Cover Go to RAP 58 Close MBF Install the Print Cartridge, or replace with the correct Print Cartridge Go to RAP 13
MBF Assy. is not closed. 1. 2. Print Cartridge is not installed The installed Print Cartridge is not the correct one.
Duplex Jam Open Rear Cover Clear Paper Path
E7-1
E7: Duplex Jam
1.
Duplex Sensor is not actuated Open the Rear Cover and within the time after the start of the remove any paper. Duplex drive motor in reverse. Go to RAP 57 Duplex sensor is being actuated at power up. Duplex Sensor is on when the interlock is closed. Exit sensor is not deactuated within Open Top Cover, remove EP time after it is actuated. Cartridge and remove any paper. Exit sensor is being actuated at Go to RAP 11 power up. Exit Sensor is ON when the interlock is closed. Exit Sensor turns from OFF to ON at Erase Cycle. Open Top Cover, remove EP Cartridge and remove any paper. Go to RAP 10 Open Top Cover or Feeder and remove the sheets. Then close the cover. Go to RAP 8
2. 3. Exit Jam-Open Rear & Top Cover Remove Print Cartridge Clear Paper Path E4-0 E-4: Exit Jam 1. 2. 3. 4. Paper Jam Open Top Cover Remove Print Cartridge Clear Paper Path MBF misfeed Paper Jam Open Top Cover Lift /Extend MBF Remove All Paper E3-1 E3: Reg. Jam
Exit Sensor did not actuate within time after the Registration clutch is actuated.
E2-1M
E2-1 Misfeed Jam
1.
Simplex printing: Reg. Sensor is OFF when the specified time has passed timing from Feed Roll ON. Printing from 2000 Sheet Feeder: Reg. Sensor is OFF when the timing is after receiving Feed_Run status. Simplex printing: Reg. Sensor is OFF when the specified time has passed timing from Feed Roll ON. Printing from 2000 Sheet Feeder: Reg. Sensor is OFF when the timing is after receiving Feed_Run status.
2.
Tray 1 Misfeed
Tray 1 Jam Open Tray 1 Lift/Extend MBF Open Top Cover Remove Printery Clear Paper Path
E2-11
E2-1 Misfeed Jam
1.
2.
Open Top Cover or Feeder and remove the sheets. Then close the cover. Go to RAP 8
Status Indicator Repair Analysis Procedures
Error Code Table
02/2000 2-6
Initial Issue DocuPrint N2025/N2825
Table 1 Error Code Table Comments On LIne Message Fault History Entry E2-12 Diagnostic Message E2-1 Misfeed Jam Error Description 1. Simplex printing: Reg. Sensor is OFF when the specified time has passed timing from Feed Roll ON. Printing from 2000 Sheet Feeder: Reg. Sensor is OFF when the timing is after receiving Feed_Run status. Simplex printing: Reg. Sensor is OFF when the specified time has passed timing from Feed Roll ON. Printing from 2000 Sheet Feeder: Reg. Sensor is OFF when the timing is after receiving Feed_Run status. Simplex printing: Reg. Sensor is OFF when the specified time has passed timing from Feed Roll ON. Printing from 2000 Sheet Feeder: Reg. Sensor is OFF when the timing is after receiving Feed_Run status. Simplex printing: Reg. Sensor is OFF when the specified time has passed timing from Feed Roll ON. Printing from 2000 Sheet Feeder: Reg. Sensor is OFF when the timing is after receiving Feed_Run status. Action Open Top Cover or Feeder and remove the sheets. Then close the cover. Go to RAP 49
Tray 2 misfeed with Tray 2 Jam 500 Sheet Feeder Open Tray 2 installed as Tray 2 Lift/Extend MBF Open Top Cover Remove PrintCart Clear Paper Path Tray 3 Misfeed with Tray 3 Jam 500 Sheet Feeder Open Tray 3 installed as Tray 3 Lift/Extend MBF Open Top Cover Remove PrintCart Clear Paper Path Tray 2 misfeed with Tray 2 Jam 2000 Sheet Feeder Open Tray 2 installed as Tray 2 Open Rear Trader Clear Paper Path
2.
E2-13
E2-1 Misfeed Jam
1.
2.
Open Top Cover or Feeder and remove the sheets. Then close the cover. Go to RAP 49
E2-12
E2-1 Misfeed Jam
1.
2.
Open Top Cover or Feeder and remove the sheets. Then close the cover. Go to RAP 62
Tray 3 misfeed with Tray 3 Jam 2000 Sheet Feeder Open Tray 3 installed as Tray 3 Open Rear TrayDr Clear Paper Path
E2-13
E2-1 Misfeed Jam
1.
2.
Open Top Cover or Feeder and remove the sheets. Then close the cover. Go to RAP 62
Duplex Jam Open Rear Cover Clear Paper Path Jam in the OCT Offset Jam Open Rear Cover Open Offset Door Clear Paper Path
E2-D
E2-2: Misfeed Jam
Registration Sensor did not actuate within time after the actuation of the Duplex Motor in reverse. 1. OCT sensor did not actuate within time after the actutation of the Exit sensor. OCT sensor is not deactuated within time after actuation of OCT Sensor. OCT sensor is actuated at power on.
Open Rear Cover and remove any paper. Go to RAP 9 Open OCT rear door and remove any paper. Open Rear cover and remove any paper. Go to RAP 68
E8-1
E8-OCT Jam
2.
3. Paper Jam Open Top Cover Lift/Extend MBF Remove PrintCart Clear Paper Path E1-1 E1: Reg. Jam 1.
2. 3.
Registration Sensor did not deactu- Open Top Cover, remove EP ate within time after actuation of Cartridge, Lift and Extend MBF Registration sensor. assy and remove any paper. Go to RAP 7 Registration sensor is actuated at power on. Registration is actuated during warm up cycle or an erase cycle. Status Indicator Repair Analysis Procedures
Initial Issue DocuPrint N2025/N2825
02/2000 2-7
Error Code Table
Table 1 Error Code Table Comments On LIne Message Duplex Unit Fail or Removed Offset Bin Fail Power Off/On 2000 Sheet Feeder Tray 2 Failure installed as Tray 2 Power Off/On 2000 Sheet Feeder Tray 3 Failure installed as Tray 3 Power Off/On Fault History Entry E9-1 E9-2 E9-3 E9-3 Diagnostic Message E9:Duplex Fail E-9:OCT Fail E-9:HCF Fail E-9:HCF Fail EO:HCF Elevator Error Description Duplex module removed while power is on. OCT removed while power is on. Action Reinstall Duplex Module Go to RAP 60 Reinstall OCT Go to RAP 71
2000 Sheet Feeder removed while power Reinstall HCF is on. Go to RAP 66 2000 Sheet Feeder removed while power Reinstall HCF is on. Go to RAP 66 1. 2000 Sheet Feeder elevator did not Open and close 2000 Sheet reach home position within the pre- Feeder paper tray. scribed time. Paper level sensor on when 2000 Sheet Feeder Tray is Opened. Correct the mismatch Go to RAP 22
2. Paper Size Jam Open Rear Cover PSE-1 Paper Size Error
There is a conflict between the size of the paper, which is detected by the Size Switches, and the length of paper the printer detects by the length of time the Registration Sensor is actuated.
Insert Tray 1 Insert Tray 2 Insert Tray 3 Load Tray 1 Load Tray 2 Load Tray 3 Load MBF Remove Output from St. Bin Remove Output from Offset Bin Toner Low
C3:Tray 1 Error C3: Tray 2 Error C3: Tray 3 Error C5:Tray 1 Empty C5:Tray 2 Empty C5:Tray 3 Empty C5:MBF Empty C5: Top Tray Full
Tray 1 is not detected in printer. (all paper Install Tray 1 size switches not actuated) Go to RAP 4 Tray 2 is not detected in printer. (all paper Install Tray 2 size switches not actuated) Go to RAP 4 Tray 3 is not detected in printer. (all paper Install Tray 3 size switches not actuated) Go to RAP 4 Tray 1 is out of paper Tray 2 is out of paper Tray 3 is out of paper MBF is out of paper Load paper into Tray 1 Go to RAP 5 Load paper into Tray 2 Go to RAP 5 Load paper into Tray 3 Go to RAP 5 Load paper into MBF Go to RAP 5
Top Tray is declared full when 5 prints are Empty Top Tray delivered to the top tray after the Full Go to RAP 6 Stack sensor is actuated. 5 prints are delivered to the top tray after Empty OCT Tray the OCT Full Stack sensor is actuated. Go to RAP 67 Toner Low is detected after 10 prints while toner sensor is on. Controller memory has failed (32 me on board). Replace Print Cartridge Go to RAP 14 Go to RAP 23 Power Off/On Remove Options Replace System Controller PWB (REP 8.1) Go to RAP 12
C5:OCT Tray Full J5:Toner Low
Memory Failure Power Off/On
ESS-M
N/A
Status Indicator Repair Analysis Procedures
Error Code Table
02/2000 2-8
Initial Issue DocuPrint N2025/N2825
Table 1 Error Code Table Comments On LIne Message NV Memory Fail Power Off/On Disk Error Format Disk Fault History Entry ESS-N Diagnostic Message N/A Error Description Controller NVM Failure Action Power Off/On Replace System Controller PWB (REP 8.1) Power Off/On Format Hard Drive (See Reset Menu GP 3.3) Replace Hard Drive (PL 9.1) Replace System Controller PWB (REP 8.1) Customer Unlock Disk Replace Hard Disk (PL 9.1)
D-1
N/A
Hard Drive error was detected.
Init Failed Disk Locked Format Failed Disk Locked
D-2 D-3
N/A N/A
Cannot format disk, disk locked via PJL or SNMP Command.
Cannot put disk in factory default attempt Customer Unlock Disk to initialize disk after it is locked. Replace Hard Disk (PL 9.1)
Table 2 System Controller Error Code Table LED # blinks Control Panel Message Followed by 1 sec. off 0001 - System Controller 1 0001 - BASE RAM 0001 - BASE ROM 0001 - ASIC 0001 - TIMER 0001 - PWPM 0001 - DMA 0001 - COMM 2 3 4 4 5 5 6 Comment System Controller Board major failure. Go to RAP 12. System Controller Board RAM failure. Go to RAP 12. System Controller Board boot ROM. Go to RAP 12. System Controller Board ASIC failure. Go to RAP 12. System Controller Board Timer failure. Go to RAP 12. System Controller Board PWPM failure. Go to RAP 12. System Controller DMA failure. Go to RAP 12. System controller parallel port failure, USB port failure, ENet Port Failure. Replace System Controller PWB (REP 8.1) Replace the System Controller PWB (REP 8.1) System Controller - IOT handshake failure. Remove and reinstall the System Controller PWB (REP 8.1). Replace the System Controller PWB (REP 8.1). Replace the Print Engine Controller PWB (REP 8.5). Hard disk failure. Format Hard Disk (see Reset Menu GP 3.3). Replace the Hard Disk (PL 9.1). Replace the System Controller PWB (REP 8.1). DIMM board 1 failure. Go to RAP 45. DIMM board 2 failure. Go to RAP 46. DIMM board 3 failure. Go to RAP 47. System Controller Xerox Image Enhanced PWPM failure. Replace the System Controller PWB (REP 8.1). System Controller Xerox Image Enhanced PWPM failure. Replace the System Controller PWB (REP 8.1).
0001 - USB 1000 - IOT
6 8
0010 - DISK
9
0101 - DIMM1 0102 - DIMM2 0103 - DIMM3 2000 - XIE RAM 2010 - XIE PWPM
10 11 12 15 15
Initial Issue DocuPrint N2025/N2825
02/2000 2-9
Status Indicator Repair Analysis Procedures
Error Code Table
Table 2 System Controller Error Code Table LED # blinks Control Panel Message Followed by 1 sec. off 2020 - XIE VDMA 15 Comment System Controller Xerox Image Enhanced VDMA failure. Replace the System Controller PWB (REP 8.1). Replace the appropriate network card (PL 9.1). Replace System Controller PWB (REP 8.1). Memory size not large enough to load the system software Download Data. Replace System Controller PWB (REP 8.1).
3000 - Token Ring 16 3000 - Serial 3000 - E-Net (10 Base 2) 5000 - Memory None
Status Indicator Repair Analysis Procedures
Error Code Table
02/2000 2-10
Initial Issue DocuPrint N2025/N2825
RAP 1 AC Power
Initial Actions
Disconnect the AC power cord from the wall outlet.
XL, UK and AO (220 VAC) Figure 2. Perform the following:Measure the AC voltage between Line and Neutral, between Line and Earth/Ground, and between Neutral and Earth/Ground. The voltage between Line and Neutral and between Line and Earth/Ground is 216 to 264 VAC and between Neutral and Earth/Ground is less than 3 VAC.
WARNING
Improper connection of the grounding conductor can result in the risk of electrical shock. The following must be observed: · · · Never use a ground adapter plug to connect the machine to a power source. Never attempt any maintenance function which is not specifically called out in the service procedures. Never remove any covers which are fastened with screws, unless so instructed in the service procedures. CAUTION Figure 2 XL, UK, and AO (220 VAC) Outlet. XL, Europe (220 VAC) Figure 3. Perform the following: Measure the AC voltage between the supply pins, then between a supply pin and earth, then between the other supply pin and earth. The voltage is 196 to 244 VAC between the supply pins and between one of the supply pins and earth. Between the other supply pin and earth is less than 3 VAC.
If any of the voltage measurements are not as specified in the following steps, the cause must be corrected. Caution the customer NOT to connect the machine to the wall outlet. Advise the customer that a licensed electrician must correct the wiring. Do not attempt to correct the wiring yourself. If you later find the condition has not been corrected, inform your manager in writing of the improper wiring.
Procedure
Perform one of the following line voltage checks: US, XCI, and AO (115 VAC) Figure 1. Perform the following:Measure the AC voltage between AC Line and Neutral, between AC Line and Ground, and between AC Neutral and Ground. The voltage between Line and Neutral and between Line and Ground is 104 to 127 VAC and the voltage between Neutral and Ground less than 3 VAC.
Figure 3 XL, Europe (220 VAC) Outlet. The voltage measured is correct. Y N Inform the customer of insufficient voltage or improper wiring. Check the continuity through all connections of the power cord. The measurement is less than 10 ohms for each connection. Y N Replace the power cord (PL 9.2) as applicable.
Figure 1 US, XCI, and AO (115 VAC) Outlet. Perform RAP 2.
Initial Issue DocuPrint N2025/N2825
02/2000 2-11
Status Indicator Repair Analysis Procedures
RAP 1
RAP 2 DC Power
This procedure is used to troubleshoot the Low Voltage Power Supply.
A Return to Initial Actions or to the procedure that sent you here.
Procedure
Perform RAP 1 before starting this RAP If RAP 1 checks out OK, switch the main power off and . disconnect the printer power. Remove the Lower Rear Cover (REP 1.7). Connect printer power. Switch the printer power on. Measure the voltage on the LVPS between P/J167 pins 1 and 3. The voltage matches the line voltage. Y N Replace the AC Input Assembly (REP 8.8). Measure the voltage between the bottom of Fuse F101 and P/J167 pin 3. The voltage matches the line voltage. Y N Switch the main power off. Replace fuse F101. Switch the main power on. Measure the voltage between the bottom of Fuse F101 and P/J167 pin 3. The voltage matches the line voltage. Y N Replace the LVPS (REP 8.6). Problem Solved. Measure the voltage between LVPS P/J162 pin 3 and frame ground. The voltage is +24VDC. Y N On the LVPS, measure the voltage between P/J162 pin 1 and frame ground. The voltage is +24VDC Y N Replace the LVPS (REP 8.6). Check the Top Cover and the printer Upper Rear Cover. Both covers are closed and actuating the interlock switches. Y N Repair or replace the defective cover/interlock switch as necessary. properly
Check the continuity through the interlock switches. Replace if necessary (REP 7.5/REP 10.13). Check the voltages listed in Table 1. Table 1 LVPS Red Lead P/J161 pin 10 P/J161 pin 11 P/J161 pin 3 Black Lead Frame Ground Frame Ground Frame Ground Voltage +5.0VDC +3.3VDC +24.0VDC
All voltages in Table 1 are correct. Y N Go to RAP 3. A Status Indicator Repair Analysis Procedures
RAP 2
02/2000 2-12
Initial Issue DocuPrint N2025/N2825
A
RAP 3 DC Power Loading
Initial Actions
Perform RAP 2 DC Power before starting this RAP.
·
P/J20 (Tray 1 Size Sensor/MBF Home Sensor)
Switch the printer power on and measure the voltages listed in Table 1. All voltages are correct. Y N Replace the Print Engine Controller PWB (REP 8.5). Switch the printer power off. Reconnect one of the disconnected plugs. Switch the printer power on. Measure the voltages listed in Table 1. All the voltages are correct. Y N Replace the component just connected to the Print Engine Controller PWB. Repeat the step with the next disconnected plug. Switch the printer power off. Reconnect one of the disconnected plugs. Switch the printer power on. Measure the voltages listed in Table 1. All the voltages are correct. Y N Replace the component just connected to the LVPS. Repeat the step with the next disconnected plug.
WARNING
AC input voltages can be lethal. Use extreme care while checking the voltages on the LVPS. Disconnect the power cord while checking the continuity of fuses and while removing or reinstalling the components.
Procedure
Switch the printer power off. Remove the Lower Rear Cover (REP 1.7). Disconnect the following from the LVPS: · P/J161 (Print Engine Controller PWB) · · · · · P/J163 (System Controller PWB) P/J164 (Main Motor) P/J165 (Main Fan) P/J166 (LVPS Fan) P/J168 (5VDC Power Supply)
Switch the printer power on and measure the voltages listed in Table 1 on the LVPS. Table 1 LVPS Red Lead P/J161 pin 10 P/J161 pin 11 P/J161 pin 3 All voltages are correct. Y N Replace the LVPS (REP 8.6). Switch the printer power off. Reconnect P/J161 to the LVPS. Switch the printer power on and measure the voltages listed in Table 1. All the voltages are correct Y N Switch the printer power off. Remove the Left Side Cover and the Print Engine Controller PWB Cover. Reconnect all the P/Js to the LVPS. Disconnect the following from the Print Engine Controller PWB: · P/J11 (Laser) · · · · · · · · P/J21 (Print Cartridge Sensor) P/J14 (Toner Sensor) P/J12 (Tray 1 Feed head components/Tray 1 Low Paper Sensor) P/J22 (Registration Clutch) P/J13 (Feeder 2/3) P/J17 (Fuser Control PWB / Fuser) P/J19 (Duplex Assembly/OCT) P/J18 (HVPS/Registration Sensor) Status Indicator Repair Analysis Procedures Black Lead Frame Ground Frame Ground Frame Ground Voltage +5.0VDC +3.3VDC +24.0VDC
A Initial Issue DocuPrint N2025/N2825
02/2000 2-13
RAP 3
A
RAP 4 C3: Tray Error / Insert Tray 1,2,3
Tray Assembly (Tray 1, Tray 2, or Tray 3) are not in place.
B Replace the Print Engine Controller PWB (REP 8.5). If the problem persists, replace the System Controller (REP 8.1).
Procedure
Enter Diagnostics and select Test Print. Run a test print from every tray (see section 6). The Error Code specifies Tray 2 or Tray 3. Y N Remove and reinstall Tray 1. The C3 error code still appears. Y N Problem solved. Inspect the Paper Stack End Guide position in the tray. The End Guide is snug against the paper stack. Y N Adjust the End Guide to contact the paper stack. Enter Component Test, select Tray 1 Size. Press the Enter Key (key 4). The paper size indicated on the LCD matches the paper size actually in Tray 1. Y N Remove Tray 1. Enter Component Test - Sensor Input test. One at a time, press and release each of the Tray 1 size actuators. The number on the LCD increments each time you press and release one of the actuators. Y N Go to RAP 37 Check the size cam on the left side of the paper tray. The cams are in good condition (not broken) and rotate freely as the paper tray end guide is moved. Y N Replace Tray 1 (PL 2.1/ PL 2.2). Remove the Left Side Cover (REP 1.1). As you insert Tray 1, watch the size actuators (visible under the Print Engine Controller PWB metal cover) move depending on the setting of tray 1. See Table 1. Table 1 Paper Size Actuators Actuator 4 Top 3 2 1 Bottom x x 8.5 LEF x x x x x x x x x A4 LEF B5 LEF A5 LEF x 14" SEF x 8.5" SEF x x A4 SEF x x x B4 SEF
Go to RAP 45 (for 500 Sheet Feeder) or RAP 64 (for 2000 Sheet Feeder).
The Tray 1 Size Cams contact the Paper Size Actuators correctly for each size of paper. Y N Replace Tray 1 (PL 2.1/ PL 2.2)). If the problem persists, replace the Tray 1 Left Guide Assembly (REP 3.6). Replace the Tray 1 Left Guide Assembly (REP 3.6). A B Status Indicator Repair Analysis Procedures Initial Issue DocuPrint N2025/N2825
RAP 4
02/2000 2-14
A
RAP 5 C5: Add Paper To MBF, Tray 1, 2 or 3)
Procedure
The problem appears when using Tray 2 or 3. Y N Check the paper level in Tray 1. There is at least 100 sheets of paper in Tray 1. Y N Load paper into Tray 1. Check the paper level in the MBF. There is paper in the MBF. Y N Load paper into the MBF. Enter Diagnostics and select Test Print. Run a test print from the MBF Tray (see section 6). The C5 error code appears when you feed paper from MBF. Y N Run a test print from the Tray 1. The C5 error code appears when you feed paper from Tray 1. Y N Return to Initial Actions and restart. Remove Tray 1 from the printer. Remove the Tray Cover, if installed, and all paper from the tray. Insert Tray 1 into the printer and inspect the Bottom Plate. The Bottom Plate is raised fully and evenly. Y N Replace the Tray 1 Assembly (PL 2.1/ PL 2.2). Remove Tray 1. Manually actuate the Tray 1 No Paper and Low Paper sensors. The No Paper and Low Paper Actuators move smoothly. Y N Replace the Tray 1 No Paper Actuator (REP 2.6) or Low Paper Actuator (PL 3.1).
Y
N Go to RAP 33.
Replace the Print Engine Controller PWB (REP 8.5). Go to RAP 47.
NOTE: When checking the Low Paper Sensor using the Sensor Test, at least one Paper Size switch and the Low Paper Sensor must be actuated.
Enter Diagnostics and select Component Test. Scroll to Sensor Input Test and press Enter. Manually actuate the Tray 1 No Paper and Low Paper Sensors. The number on the LCD increments each time you press and release one of the actuators. Y N Go to RAP 34. Replace the Print Engine Controller PWB (REP 8.5). Insert then remove a piece of paper into the MBF. The MBF No Paper Actuator moves smoothly when paper is inserted then removed. Y N Repair or replace the actuator, as necessary. Enter Diagnostics and select Component Test. Scroll to Sensor Input Test and press Enter. Manually actuate the MBF No Paper Sensor. The number on the LCD increments each time you press and release the actuator. A Initial Issue DocuPrint N2025/N2825 Status Indicator Repair Analysis Procedures
02/2000 2-15
RAP 5
RAP 6 C5: Top Tray Full
Error code indicates the Top Tray is full.
RAP 7 E1: Paper Jam / Tray To Registration.
There is a paper jam between the Paper Tray / Paper Handler Assembly and the Registration Sensor.
Procedure
There is a paper stack on the Top Cover close to the Stack Full Actuator. Y N The paper is curled. Y N Open the Rear Cover. Press and release the Stack Full Actuator. The flag of the Stack Full Actuator alternately clears and obscures the detecting points of the sensor when the actuator is moved. Y N Replace Stack Full Actuator (REP 5.3) or Sensor (REP 5.2) as necessary. Enter Diagnostics and select Component Test. Scroll to Sensor Input Test and press Enter. Manually actuate the MBF Stack Full Actuator. The number on the