README.txt README_DEE_A.05.00.2012.0630.txt part of Agilent README.txt README DEE A.05.00.2012.0630 README.txt README_DEE_A.05.00.2012.0630.txt, Agilent README.txt README_DEE_A.05.00.2012.0630.txt text manual preview

Text preview for : README.txt README_DEE_A.05.00.2012.0630.txt part of Agilent README.txt README DEE A.05.00.2012.0630 Agilent README.txt README_DEE_A.05.00.2012.0630.txt

Back to : README.txt README_DEE_A.0 | Home

===============================================
README.TXT

Desktop EasyEXPERT Software
===============================================

This document contains the following:
* Introduction
* System Requirements
* Installation Instructions
* Before Starting Desktop EasyEXPERT
* Other Documents
* Known Defects
* Software Revision

Introduction
============
The Desktop EasyEXPERT software provides the following additional
advantages to the B1500A/B1505A, allowing you to minimize the amount of
offline tasks performed on B1500A/B1505A and increase the working ratio for
measurements.
- Allows B1500A/B1505A to be controlled from an external computer via GPIB
while online.
- Allows test setup to be created on an external computer while
offline.
- Allows data analysis to be performed on an external computer while
offline.

Another feature is the unified measurement environment. You can use
the Desktop EasyEXPERT to control the 4155B, 4156B, 4155C, or 4156C
instead of the B1500A/B1505A. Then, there are some differences in the
functions and operations compared with when the B1500A/B1505A is used.

NOTE:
Desktop EasyEXPERT supports most B1500A/B1505A EasyEXPERT functions. However,
some functions are not supported on an external computers due to
differences in hardware and so on.

System Requirements
===================
The following are the minimum requirement for executing Desktop
EasyEXPERT.
- Display: XGA 1024x768 (SXGA 1280x1024 recommended)
- Hard disk drive: 1 GB free space in the C drive, 10 GB (30 GB
recommended) free space in a drive for test setup/result data
storage.
- GPIB interface (for the Online execution mode): Agilent 82350B GPIB
interface
- Operating systems:
- Windows XP Professional English Version or Japanese Version SP3 or later
- Processor: Intel Celeron 2 GHz
- Memory: 512 MByte DDR266
- Windows Vista Business English Version or Japanese Version SP2 or later
- Processor: Vista certified PC
- Memory: 1 GByte memory
- Windows 7 Professional English Version or Japanese Version SP1 or later
- Processor: Windows 7 certified PC
- Memory: 2 GByte memory
- Language:
- English (US) or Japanese
- Software:
- Microsoft Windows Installer 3.1 or later
- Microsoft .NET Framework Version 2.0 Redistributable Package
- Microsoft .NET Framework 2.0 Service Pack 2
- Agilent IO Libraries Suite 16.2 (for the Online execution mode)

NOTE:
If your computer does not install all required software, install them
in the above sequence.

If your computer does not install a software, install it and the
following software. For example, if your computer does not install
Microsoft .NET Framework 2.0 Service Pack 2, install it, and Agilent IO
Libraries (if you use the ONLINE mode) in this sequence.

Prepare the Agilent IO Libraries software CD-ROM furnished with Agilent
GPIB interface to install the IO Libraries.

Note that Desktop EasyEXPERT A.04.21 does not support Agilent IO
Libraries 14.2 or prior versions.

The other required software are stored in the Desktop EasyEXPERT
Prerequisites folder on this CD-ROM.

Installation Instructions
=========================
To install Desktop EasyEXPERT onto your computer, follow the procedure
below.

1. Insert the Desktop EasyEXPERT software CD-ROM into the CD-ROM
drive.
2. If needed, double click the index.html file in the CD-ROM.
3. Click "Install Desktop EasyEXPERT" icon and follow the instructions
of the setup wizard.
4. Wait for installation to complete, and remove the CD-ROM from the
CD-ROM drive.
5. Launch Start EasyEXPERT by selecting from the Start menu or by
double clicking the Start EasyEXPERT icon on the desktop. The Start
EasyEXPERT window and the Execution Mode dialog box are displayed.
6. In the dialog box, set the execution mode to Online or Offline.
7. If you select the online mode, set the GPIB interface on your
computer and the GPIB address of the B1500A/B1505A or 4155/4156 connected
to your computer via GPIB.

NOTE:
To optimize the appearances of the EasyEXPERT window, set the Font size
to "Normal" on the Display Properties window's Appearance tab. To open
the Display Properties, launch "Display" from the Control Panel.

If you use 4155/4156 instead of B1500A/B1505A, check the 4155/4156 firmware.
It must be as follows:

HOSTC: 03.08 or later
SMUC: 04.08 or later

If the firmware revision does not match, open the README file in the
"415x Firmware Image" folder on this CD-ROM, and follow the instruction
to update the firmware.

Before Starting Desktop EasyEXPERT
==================================
Note the following when starting Desktop EasyEXPERT.
- When using the offline mode, use the data import/export function to
transfer your test setup data files and test result records.
- When using the online mode with B1500A/B1505A, exit EasyEXPERT on the
B1500A/B1505A. The Start EasyEXPERT window (button) must be displayed or be
minimized to the Windows task bar on the B1500A/B1505A screen.
- Do not send a control command to B1500A/B1505A or 4155/4156 by using a
programming environment except for Desktop EasyEXPERT.
- Do not send a control command to B1500A/B1505A or 4155/4156 by using the
GPIB IO statement in a test definition of EasyEXPERT.

Other Documents
===============
The following electronic manual is available to use this software. This
is stored in the Agilent B1500A/B1505A Manual CD-ROM.
- Agilent B1500A/B1505A User's Guide
- Agilent B1500A/B1505A Self-paced Training Manual

Known Defects
=============
There are no known defects in this program.

Software Revision
=================
A.02.00 April 2006 Initial release.
A.02.10 June 2006 Update to add some features and to fix some defects.
A.02.11 September 2006 Update to add some features and to fix some defects.
A.03.00 June 2007 Update to support 4155/4156 with some additional
features and to fix some defects.
A.03.10 November 2007 Update to add some features and to fix some defects.
A.03.11 July 2008 Update to support Microsoft .NET Framework
2.0 SP1, some additional features and to fix
some defects.
A.03.20 November 2008 Update to support Windows Vista, new WGFMU
module, some additional features and to fix
some defects.
A.04.00 Jun 2009 Update to support B1505A with some additional features
and to fix some defects.
A.04.02 October 2009 Update to fix some defects.
A.04.03 January 2010 Update to fix some defects.
A.04.10 May 2010 Update to add some features and to fix some defects.
A.04.11 December 2010 Update to fix some defects.
A.04.20 August 2011 Update to support Windows 7 and to fix some defects.
A.04.21 March 2012 Update to fix some defects.
A.05.00 Jun 2012 Update to some features and to fix some defects.

Microsoft and Windows are registered trademarks of Microsoft
Corporation. All other trademarks are the property of their respective
owners.

Copyright Agilent Technologies 2006 - 2012
All rights reserved.