Text preview for : 03458-90017.pdf part of Agilent 03458-90017 Agilent 3458A 03458-90017.pdf
Back to : 03458-90017.pdf | Home
Keysight 3458A
Multimeter
Calibration
Manual
KEYSIGHT TECHNOLOGIES WARRANTY STATEMENT
KEYSIGHT PRODUCT: 3458A Multimeter DURATION OF WARRANTY: 1 year
1.Keysight Technologies warrants Keysight hardware, accessories and supplies against defects in materials and workmanship for the period
specified above. If Keysight receives notice of such defects during the warranty period, Keysight will, at its option, either repair or
replace products which prove to be defective. Replacement products may be either new or like-new.
2. Keysight warrants that Keysight software will not fail to execute its programming instructions, for the period specified above, due to
defects in material and workmanship when properly installed and used. If Keysight receives notice of such defects during the
warranty period, Keysight will replace software media which does not execute its programming instructions due to such defects.
3.Keysight does not warrant that the operation of Keysight products will be interrupted or error free. If Keysight is unable, within a reasonable
time, to repair or replace any product to a condition as warranted, customer will be entitled to a refund of the purchase price upon prompt
return of the product.
4. Keysight products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use.
5.The warranty period begins on the date of delivery or on the date of installation if installed by Keysight. If customer schedules or delays
Keysight installation more than 30 days after delivery, warranty begins on the 31st day from delivery.
6. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration, (b) software, interfacing, parts
or supplies not supplied by Keysight, (c) unauthorized modification or misuse, (d) operation outside of the published
environmental specifications for the product, or (e) improper site preparation or maintenance.
7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER
WARRANTY OR CONDITION, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED AND KEYSIGHT
SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY
QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE.
8.Keysight will be liable for damage to tangible property per incident up to the greater of $300,000 or the actual amount paid for the product
that is the subject of the claim, and for damages for bodily injury or death, to the extent that all such damages are determined by a
court of competent jurisdiction to have been directly caused by a defective Keysight product.
9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER'S
SOLE AND EXLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL KEYSIGHT OR ITS SUPPLIERS
BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST
PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE WARRANTY TERMS CONTAINED IN THIS
STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE
IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.
U.S. Government Restricted Rights
The Software and Documentation have been developed entirely at private expense. They are delivered and licensed as "commercial
computer software" as defined in DFARS 252.227- 7013 (Oct 1988), DFARS 252.211-7015 (May 1991) or DFARS 252.227-7014 (Jun
1995), as a "commercial item" as defined in FAR 2.101(a), or as "Restricted computer software" as defined in FAR 52.227-19 (Jun
1987)(or any equivalent agency regulation or contract clause), whichever is applicable. You have only those rights provided for such
Software and Documentation by the applicable FAR or DFARS clause or the Keysight standard software agreement for the product
involved.
3458A Multimeter Calibration Manual
Edition 7
Copyright