Text preview for : RELEASE_NOTE.1.1.1418.2174 Release Note for 1.1.1418.2174.txt part of Agilent RELEASE NOTE.1.1.1418.2174 Release Note for 1.1.1418.2174 Agilent RELEASE_NOTE.1.1.1418.2174 Release Note for 1.1.1418.2174.txt



Back to : RELEASE_NOTE.1.1.1418.217 | Home


B2960A 1.1.1418.2174 RELEASE NOTE

- NEW FEATURES

LED Demonstration Program (Press [More]-[LED Demo])



B2960A 1.0.1339.6715 RELEASE NOTE

- FIXED DEFECTS

#149042 Setting conflict error doesn't happen when running on the front panel.
#149694 Unexpected hang-up after measurement with long wait and time constant.
#158151 Cannot launch the web instrument on IPv6.
#158884 The instrument shows "Fan speed is too fast" in RACK mode.
#162283 Unexpected pop-up window is shown if USB-A (front) is connected to USB-B (rear).
#162299 Window2 text is not shown on Single view when the instrument returns to local.
#177173 Application Error occurs during Sweep Measurements
#179938 Hangs up by front panel operation during SCPI command is in progress.
#179941 Unexpected trace configuration is shown on Trace Buffer Setup dialog.
#182858 Unexpected query result on :SENSe:DATA? command.
#184063 I/O hangs when transferring large amount of data.
#187575 Intermittent hang-up when sweep measurement is aborted by output protection.
#193236 Unable to abort infinite waveform output when both two channels are busy.


B2960A 1.0.1236.9609 RELEASE NOTE

- INITIAL RELEASE