Text preview for : 04SSI.PDF part of Nokia 8260 Service Manual NSW-4 Series Cellullar Phones
Back to : Nokia 8260 Service Manual | Home
PAMS Technical Documentation NSW-4 Series Transceivers
Service Software Instructions
Issue 1 08/00
E Nokia Mobile Phones Ltd.
NSW-4 Service Software Instructions
PAMS Technical Documentation
AMENDMENT RECORD SHEET
Amendment Date Number Inserted By OJuntune Comments Issue1
08/00
Page 2
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
CONTENTS Page No
Service Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hardware requirements for Windows 3.1x . . . . . . . . . . . Hardware requirements for Windows 95 . . . . . . . . . . . . Software Environment of the Support Modules . . . . . . . . . Required Servicing Equipment . . . . . . . . . . . . . . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the Software on PC Hard Disk . . . . . . . . . . . . Common Properties of the User Interface . . . . . . . . . . . . . . . . . . Login Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Menu Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mouse Cursors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reserved Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Short Cut Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alt Hot Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ctrl Hot Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shift Hot Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Key Strokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Help Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dialog boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Common Dialog boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Note Message Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Query Message Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Error Message Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Custom Dialog boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reporting Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NSW-4 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Menu bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . New command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E Nokia Mobile Phones Ltd. 5 5 5 5 5 6 7 7 8 9 9 10 12 12 13 13 13 14 14 14 15 16 16 16 16 16 16 17 19 19 19 19 19 20 21 21 22 23 23 23 23
Issue 1 08/00
Page 3
NSW-4 Service Software Instructions
PAMS Technical Documentation
Open... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Initialise... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Normal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Local Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Faultlog command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Activate Faultlog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edit Faultlog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FastNAM command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exit command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AFC... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCTCXO... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . Modulator Output... command . . . . . . . . . . . . . . . . . . . . . Tx Power... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tx I/Q... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RSSI Digital (AGC)... command . . . . . . . . . . . . . . . . . . . . RSSI Analog... command . . . . . . . . . . . . . . . . . . . . . . . . . Rx Audio... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tx Audio... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Charging... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RF Controls... command . . . . . . . . . . . . . . . . . . . . . . . . . . Self Tests... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . ADC Readings... command . . . . . . . . . . . . . . . . . . . . . . . Audio... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Interface... command . . . . . . . . . . . . . . . . . . . . . . . . Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Profile... command . . . . . . . . . . . . . . . . . . . . . . . Set Default Values... command . . . . . . . . . . . . . . . . . . . . Authority ID... command . . . . . . . . . . . . . . . . . . . . . . . . . . Akey... command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flash Phone... command . . . . . . . . . . . . . . . . . . . . . . . . . Dealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Settings... command . . . . . . . . . . . . . . . . . . . . . . . . . Short Code Memory... command . . . . . . . . . . . . . . . . . . . Calling cards... command . . . . . . . . . . . . . . . . . . . . . . . . . Subscriber data programming... command . . . . . . . . . . P/RSID programming... command . . . . . . . . . . . . . . . . . . Intelligent Roaming Database... command . . . . . . . . . . User Data Transfer... command . . . . . . . . . . . . . . . . . . . . View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick/RF Info... command . . . . . . . . . . . . . . . . . . . . . . . . Phone Identity... command . . . . . . . . . . . . . . . . . . . . . . . . Appendix 1, Vocabulary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23 23 24 24 24 25 25 25 25 26 26 27 29 30 33 34 36 38 39 40 41 42 42 44 46 47 49 50 50 52 53 54 55 56 56 58 60 62 64 66 69 70 70 71 72
Page 4
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Service Software
General
To run the After Sales SW, a parallel port software protection device (PKD1) has to be connected. TDF4 box must connected to PC for flashing purposes. The user can use PClocals functions in modules for testing NSW-6 mobile stations (MS). The test functions send test messages from PC to MS and receive results and show them in the PC display. The messages can be sent via M2BUS or FBUS. Note: if this software is to be run on laptops, the power saving feature MUST be switched off. Hardware requirements for Windows 3.1x The recommended minimum hardware standard to run Service Software is any computer which is 386 33 MHz or greater with at least 4 MB of memory and VGA type display (640 x 480). This assumes that only the WinTesla with After Sales Support Modules is active, i.e. other Windows packages are not running in the background. Hardware requirements for Windows 95 The recommended minimum hardware standard to run Service Software is any computer which has Pentium processor, memory 8 MB and meets HW requirements recommended by Microsoft.
Software Environment of the Support Modules
The Service Software user interface is intended for the following environments: Microsoft Windows 3.1x (enhanced mode) and Windows 95environment running in enhanced mode. Support for Microsoft NT may be added, if required. Detailed information about Windows and application usage can be found from the Microsoft Windows Version 3.1 Users Guide chapter one (Windows Basics) and chapter two (Application Basics). As an ordinary Windows application, the main idea in the user interface is that selections are made with menus, push buttons and shortcut keys. Selections can be done by using keyboard and/or mouse. There is always a status bar displayed at the bottom of the main window which contains information about current actions.
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 5
NSW-4 Service Software Instructions
PAMS Technical Documentation
Required Servicing Equipment
Computer: At least IBM 80386 or compatible with one unused serial port (COM1 or COM2) *), one parallel port (LPT1), hard disk recommended Operating System: DOS Version 3.2 or later If PCLStart in use: DOS 6.22 and IBM 80486 or compatible Display: Any 80character text display Service software version for 3.5" disk (product code: 0774099) Software protection key PKD1 (product code: 0750018) Service MBUS Cable DAU9S (product code: 0730108) Service Audio Box JBA6 (product code: 0770184) External Antenna Cable XRC2 (product code 0730180) Flash Adapter FLA12 (product code: 0770211)
*) Note:
A number of PC's of an older generation use the Intel, National Semiconductor, or United Microelectronics IC 8250 as the serial port UART. This is a comparatively inefficient circuit for current purposes and does not necessarily support the M2BUS adapter at 9600 baud. The newer UART's NS16450 and NS16550AF of National Semiconductor offer solutions for these problems.
Installation
Mechanical Connections
Caution: Make sure that you have switched off the PC and the printer before making connections. Caution: Do not connect the PKD1 key to the serial port. You may damage your PKD1 !
The software controls the phone via a separate adapter connected to the serial port of the PC, and to the telephone's M2BUS (DAU9S). Attach the dongle PKD1 to the parallel port 1 (25pin female Dconnector) of the PC. When connecting PKD1 to the parallel port, be sure that you insert the computer side of the PKD1 to the PC (male side). If you use a printer on parallel port 1, install the PKD1 between the PC and your printer cable. The PKD1 should not affect devices working with it. If some errors occur (errors in printing are possible) please try printing without the PKD1. If printing is OK without the PKD1 please contact your dealer. We will offer you a new PKD1 in exchange for your old one.
Page 6
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Installing the Software on PC Hard Disk The program is delivered on a diskette and is copy protected with a dongle PKD1. It must be present in parallel port when using Service software. The program can also be installed on the hard disk, which is recommended to obtain a maximal data access rate. Keep the original diskette safe to enable upgrading of the program ! If you plan to use PCL Start service software, you must install it before installing Service software, see the PCL Start installation instructions. To install the new Service software program, follow the steps below: 1. 2. 3. insert the new Service software diskette into drive A: of your computer start Windows, and open File Manager log into drive a: start INSTALL.EXE and
type A: and press type C: and press
install Service software to drive C:
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 7
NSW-4 Service Software Instructions
PAMS Technical Documentation
Common Properties of the User Interface
This chapter describes how the User Interface CLF must appear to the user. The User Interface MUST be capable of being driven without the use of a mouse, as the service engineer rarely has space on the bench to use a mouse.
Login Dialog
When the Service Software application is invoked, by clicking on the Service Software icon, the Login dialog box will be displayed on the screen.
Nokia logo and application name bitmap () Displays Nokia logo and name of the application. Application version static text () Contains the name and version of the application. Copyright notice static text () Copyright is informed as: "Nokia Mobile Phones (c) 19951999. All Rights Reserved". Login Box edit box () The user Login ID edit box, where the user enters his faultlog user name. (See Faultlog User Guide) OK button (default key) The user name is stored in memory and the dialog box is closed. When the dialog box is closed, the application starts.
Page 8
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Cancel button (ESC) The Dialog box is closed and application is started, but the Faultlog feature is disabled. Help button (F1) Activates the Windows Help application and displays context sensitive Help.
Main Window
Title bar The title bar is located at the top of the window. A title bar contains the following elements: · Application Controlmenu button · Maximise button · Minimise button · Name of the application · Restore button The properties of these elements and their usage is described in Ref 3 Microsoft Windows Version 3.1 Users Guide chapter one (Windows Basics) and chapter two (Application Basics). Menu bar The menu bar is below the title bar and contains all available menu selections. The menu bar is a dynamic element and is dependent on the dongle type fitted, and whether a phone is connected. Underlined characters in menu names and options indicates that the menu selection can be done by pressing Alt+ underlined character. Options can also be selected by activating menu bar with Alt key ( or F10 key ) and using arrowkeys to highlight the desired menu. In that case, selection is done by pressing Enter. E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 9
NSW-4 Service Software Instructions
PAMS Technical Documentation
Menus can also be selected by using the mouse as described in Ref 3Microsoft Windows Version 3.1 Users Guide Status bar The status bar is displayed at the bottom of the Service Software main window. The status bar contains information about the menu selections and events. The left area of the status bar describes the actions of menu items as the user uses the arrow keys to navigate through menus. The status bar texts are explained in detailed in each of command's description. The right areas of the status bar indicate which of the following keys are latched down: Indicator USER CAP NUM SCRL Tool bar The tool bar is NOT defined and will not be implemented until specified by this document. Description Entered Login ID. The Caps Lock key is latched down. The Num Lock key is latched down. The Scroll Lock key is latched down.
Page 10
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Menu Bar
The Service Software package will have two menu bar configurations. The first, is an abbreviated version that contains the minimum number of menus that allows package configurations when a phone is NOT connected. The second is described below: The menu bar MUST only contain the follow menus for the Service Software package when a phone is connected: · Product* · Configure* · Tuning · Testing · Software · Dealer · View · Help* * always displayed, even if no phone is connected. A menu is broken down into sections that are indicated with menu separators. Each sections identifies a logical difference from itself and other sections, i.e. between transmitter and receiver. Any items that are required to be added to a menu lists will be added on the bottom of the appropriate menu section list. If a new item is to be added which is common to two or more phone types, then that menu item will become a common menu item. The menu lists will use the Microsoft [...] symbol after an item name to indicate that selecting that item will NOT initiate an operation immediately, i.e. a dialog box will be displayed for the user to select options or type in data and press the OK button before the operation is performed.
Product
The Product menu contains the following menu items: · New · Open... · Close · Initialize ·Faultlog · Normal Mode · Local Mode F5 Shift+F5 Ctrl+R
· Activate Faultlog... F9 · Edit Faultlog...
·Fast NAM (available only if fastNAM installed) E Nokia Mobile Phones Ltd. Page 11
Issue 1 08/00
NSW-4 Service Software Instructions
PAMS Technical Documentation
· Exit
Alt+F4
Configure
The Configure menu contains the following items: · Options... · Buses... · Directories... · Faultlog... · Phone Type Specific configuration items (where applicable) ·Fast NAM (active if installed)
Tuning
The Tuning menu contains the following menu sections: · AFC..(Analog) · VCTCXO... · Modulator Output · Tx Power... · Tx I/Q... · Rssi Digital (AGC) · Rssi Analog · Rx Audio · Tx Audio · Charging... · LCD...
Testing
The Testing menu contains the following sections: · RF Controls... · Self Tests · ADC Readings · Audio · User Interface E Nokia Mobile Phones Ltd.
Page 12
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Software
The Software menu contains the following menu sections: · Product Profile... · Set Default Values... · Authority ID... · Flash Phone... · A key...
Dealer
The Dealer menu contains the following menu sections: · User Settings... · Short Code Memory... · Calling cards... · Subscriber data programming.. · P/RSID programming... · Intelligent Roaming Database... · User Data Transfer...
View
The View menu contains the following sections: · Quick/RF Info... · Phone Identity...
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 13
NSW-4 Service Software Instructions
PAMS Technical Documentation
Help
The Help menu contains the following menu items: · Index · General Help · Using Help · About WinTesla
Page 14
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Mouse Cursors
The standards Windows pointer will be used as the mouse cursor. During time consuming tasks e.g. communication to phone, an hour glass will be shown informing the user that a task is in progress. The application uses the hour glass cursor to inform user that the application has taken the control and any actions from user will be ignored. When a function is initiated, the hour glass will be displayed and when the function has finished the mouse pointer will return to normal.
Reserved Keys
The following Hot keys and Short Cut keys are reserved either as Microsoft standard keys or as part of the Common Look and Feel specified by this document.
Short Cut Function Keys
Key F1 F5 Shift+F5 F9 F10 Ctrl+F4 Description Context Sensitive Help Normal Mode Local Mode Activate Faultlog Goto Menu Bar Close Active Window Defined by Microsoft NMP NMP NMP Microsoft Microsoft
Alt Hot Keys
Key Alt+F4 Alt+H Description Exit Active Application Help Defined by Microsoft Microsoft
Ctrl Hot Keys
Key Ctrl+N Ctrl+O Ctrl+P Ctrl+R Description File New File Open File Print Product New Defined by Microsoft Microsoft Microsoft NMP
Shift Hot Keys
Shift+F5 Local Mode E Nokia Mobile Phones Ltd. NMP
Issue 1 08/00
Page 15
NSW-4 Service Software Instructions
PAMS Technical Documentation
Key Strokes
Key Alt+P Alt+P,N Alt+P,O Alt+P,C Alt+P,I Alt+P,I,N Alt+P,I,L Alt+P,F Alt+P,F,A Alt+P,F,E Alt+P,N Alt+P,X Alt+C Alt+C,O Alt+C,D Alt+C,F Alt+C,N Alt+C,G Alt+T Alt+T,A Alt+T,V Alt+T,M Alt+T,X Alt+T,Q Alt+T,D Alt+T,N Alt+T,R Alt+T,T Alt+T,C Alt+E Alt+E,R Alt+E,S Description Product Menu New Open Close Initialize Popup Normal Mode Local Mode Faultlog Popup Activate Faultlog Edit Faultlog Fast NAM Exit Application Configure Option Directories Faultlog Fast NAM GPIB instruments (disabled) Tuning Menu AFC (Analog) VCTCXO Modulator Output Tx Power Tx I/Q Rssi Digital (AGC) Rssi Analog Rx Audio Tx Audio Charging Testing Menu RF Controls Self Tests Defined by NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP
Page 16
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Alt+E,A Alt+E,D Alt+E,U Alt+S Alt+S,I Alt+S,P Alt+S,S Alt+S,V Alt+S,W Alt+S,A Alt+S,F Alt+D Alt+D,D Alt+D,U Alt+D,C Alt+D,V Alt+D,E Alt+D,F Alt+D,S Alt+D,R Alt+D,I Alt+V Alt+V,Q Alt+V,P Alt+H Alt+H,I Alt+H,G Alt+H,U Alt+H,A
ADC Readings Audio User Interface Software Menu P Product Profile P Set Default Values Va Authority ID Flash Phone Dealer Menu P User Settings Short Code Memory Set UI/DEV Default Values International access code System Service Feature codes Subscriber data programming P/RSID programming Intelligent Roaming Database View Menu Quick/RF Info Phone Identity Help Menu Index General Help Using Help About WinTesla NMP NMP NMP NMP
NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP NMP Microsoft Microsoft Microsoft Microsoft NMP
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 17
NSW-4 Service Software Instructions
PAMS Technical Documentation
Help Functions
The Help User Interface will be the standard Windows help tool called WinHelp. The context sensitive help is activated with F1key. Help contains also Using Help which describes how to use help facility. Refer to the Windows manual for detailed description on the Windows Help.
Dialog boxes
The Service Software application uses many different dialog boxes. Dialog boxes are used to display data and prompt the user for input. Dialog boxes are opened from menus or with shortcut keys. Dialog boxes have different properties but some features are common. All service dialog boxes must be modal, that is, the user will not be able to start another operation without first closing the present dialog box. All dialog boxes will contain the following entities: Help button Title bar At least one button other than Help Application Controlmenu Button
Common Dialog boxes
This sections describes the common dialog boxes used in the Service Software package, and the context in which they will be used. Note Message Box When the user has made an illegal selection, a note message box dialog will be opened and message text is displayed. The message box is also opened when the program has some information for the user. The size of the dialog box may vary. An information dialog box is recognized by the !icon.
The dialog box will also contain an OK button and a Help button. OK button (default key): Acknowledge displayed information and continue. The dialog box is closed after selection. Help button (Alt+H): Opens context sensitive help as F1key does. Query Message Box Confirmations and questions are asked in a query message box. A query dialog box is recognized by the ?icon.
Page 18
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
The dialog box will also contain a Yes button, a No button, and a Help button. Yes button (Alt+Y or Y) (default key): Accepts confirmation or question. No button (Alt+N or N): Denies confirmation or question. Help button (Alt+H): Opens context sensitive help as F1key does. The buttons may also be OK and Cancel. The operation of these buttons are the same as in the Note dialog box. Error Message Box Error message dialog boxes use the Stopicon. When a "Stop"dialog box is shown, the current operation is terminated. The dialog box has a description about the failed operation and reason. Pressing F1 (Help) application opens the appropriate help topic that gives information about recommended actions.
The dialog box will also contain an OK button and a Help button. OK button (default key): Acknowledges displayed information and terminate current operation. The dialog box is closed after selection. Help button (Alt+H): Open context sensitive help as F1key does.
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 19
NSW-4 Service Software Instructions
PAMS Technical Documentation
Custom Dialog boxes
All custom dialog boxes will contain the predefined buttons as defined below in the section Buttons. However, it is recognised that features may require additional button types, but the addition of these nonstandard buttons should be carefully considered to minimise any inconsistencies between implementations. The buttons will be positioned down the righthand side of the dialog boxes. The default action will be OK, except where that default action could result in an irretrievable failure. All tuning dialogs that contain tuning results, will display the old tuned data read from the phone before the tuning was performed, as well as the newly tuned data. List boxes will be used to display lists of data, such as tuning data, test results etc. The use of Radio buttons should be limited and carefully considered. The use of radio buttons defines the number of possible choices available to the user, which may be acceptable for one project, but not for another.
Buttons
All buttons must be the Microsoft style of buttons. In general, the default button will be the action button, the Close button or the Yes button, but this will depend on the context of the dialog box that the button is associated with. (action) button: Accepts and validates entered settings and values and closes the dialog. If the values have not been changed, then no action will be taken. The status bar will reflect the status. The user should only be queried, if the settings or values accepted will overwrite data that CAN NOT be reproduced. A greyed OK button indicates that settings selected by the user are not acceptable. Close button: Closes the current dialog box. Does not send or store anything and closes the dialog. The Close button is only used for dialogs that do not set or change any data. Cancel button (Esc): Cancel operation. Does not send or store anything and closes the dialog box. A greyed Cancel button indicates that it is not possible to quit from this dialog box. Yes button (ALT+Y or Y): Replies Yes to a question asked of the user.
Page 20
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
No button (ALT+N or N): Replies No to a question asked of the user. Help button (ALT+H): Opens context sensitive help as F1key does.
Reporting Status
The status bar will be used to report the present status to the user. When a feature is initiated, the status bar will be updated with a brief description of the function. The status bar will also be updated at key points in a time consuming function. If an error is to be reported to the user, it will be displayed in the status bar as well as displayed in a common error dialog box. This will mean the user is not delayed from progressing on to the next operation unless an error occurs, in which case, the user will have to acknowledge the error by pressing the OK button.
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 21
NSW-4 Service Software Instructions
PAMS Technical Documentation
NSW-4 FEATURES Menu bar
After Sales SW's menus follows the menu structure specified in WinTesla User Interface Specification. This specification will describe functionality that differs from WinTesla specification.
Product
New command Activation Alt, P, N Ctrl+R If phone is changed (with same phone type only serial number is changed) phone will be initialised to local mode. If phone is changed to different phone type the current DLLs are unloaded and new ones are loaded for that phone. If the Quick/RF Info view is open, window will be automatically updated. If Phone Information view is open, it will be automatically updated. Open... command Activation Alt, P, O Status Bar Text Force load phone specific functionality Status Bar Text Rescan a new phone
Phone is set to local mode. Initialise... command Activation Alt, P, I Opens a submenu for Normal Mode and Local Mode Status Bar Text
Page 22
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Normal Mode Activation Alt, P, N F5 When normal mode has been activated or program has been started, selftest results will be asked from MCU. If any fault was found in the tests, an error message is shown. If normal mode has been set successfully (no self test error has been found), and paging listening has been started, the used AFC value is requested from MS. Initialisation routine checks phone's cellular type and if unsupported phone is detected, application unloads the DLLs. The After Sales SW sets automatically the MS state to normal mode when needed. If phone identification view is open, window will be automatically updated. Also if RF Information Window is open it will be updated to quick info view. Local Mode Activation Alt, P, L Shift+F5 Selection will change the MS state to local. When user selects item from Testing or Tuning menus, the After Sales SW software will change automatically the MS state to local. The After Sales SW sets automatically the MS state to normal mode when needed. Also if quick info view is open it will be updated to RF Information view. Faultlog command Activation Alt, P, F Opens a submenu. Only enabled when user has logged in. Status Bar Text Status Bar Text Initialises phone to local mode Status Bar Text Initialises phone to normal (cellular) mode
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 23
NSW-4 Service Software Instructions
PAMS Technical Documentation
Activate Faultlog Activation Alt, P, F, A F9 Activates the faultlog. Only enabled when user has logged in. Edit Faultlog Activation Alt, P, F, E Allows user to edit faultlog entries. Only enabled when a user has logged in. FastNAM command Activation Alt, P, N F8 This menu is only enabled when FastNAM functionality is included in WinTesla. Exit command Activation Alt, P, X Exits the WinTesla application. Status Bar Text Status Bar Text Status Bar Text Status Bar Text
Page 24
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Tuning
The tuning menu offers functions for ME adjustments. AFC... command Activation Alt, T, A Status Bar Text Open AFC Tuning dialog box
The next automatic selections are made when this tuning function is activated: Active Unit = TX Operation mode = Analog Channel 250 (low) Power level 4 low band The AFC Tuning dialog is opened.
AFC tuning dialog box includes the following items: Afc scroll bar Set calibration value to phone RF Info button (ALT+I): The current rf state is shown OK button (ALT+O): Dialog box is closed and tuning is saved to phone. Cancel button (ESC): Dialog box is closed and tuning is not saved to phone. Help button (Alt+H): Opens context sensitive help.
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 25
NSW-4 Service Software Instructions
PAMS Technical Documentation
VCTCXO... command Starts Voltage Controlled Temperature compensated oscillator tuning Activation Alt, T, V Status Bar Text Open Tuning VCTCXO dialog box
The next automatic selections are made when this tuning function is activated: Active Unit = RX Operation Mode = Continuous digital low band Channel 301 Power level OFF Eeprom DAC value is shown. The measurement is started when "meas" button is pressed and it is executed in two steps: 1. User is requested to put signal generator input level 95 dB and frequency 879.030 Mhz
Page 26
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
2. Measurement with input level is executed and the value is shown in the list box
VCTCXO tuning dialog includes the following items: VCTCXO List box (ALT+A): VCTCXO value is shown Meas button (ALT+M): The measurement can be started by pressing this button. RF Info button (ALT+I): The current rf state is shown OK button (ALT+O): Dialog is closed and tuning is saved to phone. Cancel button (ESC): Dialog is closed and tuning is not saved to phone. Help button (Alt+H): Opens context sensitive help.
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 27
NSW-4 Service Software Instructions
PAMS Technical Documentation
Modulator Output... command Activation Alt, T, H or L Status Bar Text Open Modulator Output Tuning dialog box
Starts modulator output tuning The next automatic selections are made when this tuning function is activated: Active Unit = TX Operation mode = Continuous Digital Channel 730 (low) of 1400 (high) Power level 2 Selected band
Modulator Output Diagram dialog box includes the following items: Relative Gain Scroll bar Set calibration value to phone Old value static Value from Eeprom RF Info button (ALT+I): The current rf state is shown OK button (ALT+O): Dialog box is closed and tuning is saved to phone. Cancel button (ESC): Dialog box is closed and tuning is not saved to phone. Help button (Alt+H): Opens context sensitive help.
Page 28
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Tx Power... command Activation Alt, T, X, H or L Status Bar Text Open TX Power Tuning dialog box
Starts TX power tuning. User is first requested to select with which values the tuning is started in Start Tuning dialog.
Start Tuning dialog includes the following items: Current Values in PC memory Tuning values are load from program's internal memory. Phone EEPROM Values Tuning values are load from ME's EEPROM. The next automatic selections are made when this tuning function is activated: Active Unit = TX Operation Mode = Continuous digital Selected band Channel 190 (low ) or 500 (high) Power level 6
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 29
NSW-4 Service Software Instructions
PAMS Technical Documentation
The TX Power Tuning dialog will be activated automatically after value selection.
TX Power Tuning dialog includes the following items: Level DAC list box (ALT+L): The power is presented in DAMPS level values (2..10) .DACs can have values from 511 to 512.The tuning position is highlighted and can be tuned with +/ keys or left/right cursor keys or scroll bar. Ch A radio button: Tuning channel A. Frequency is shown. Ch B radio button: Tuning channel B. Frequency is shown. Ch C radio button: Tuning channel C. Frequency is shown. Ch D radio button: Tuning channel D. Frequency is shown. +/ buttons: + and buttons will cause power DAC changing by 1steps . ++/ buttons: + and buttons will cause power DAC changing by 10 steps . OK button (ENTER): Dialog is closed and tuning is saved to phone. Cancel button (ESC): Dialog is closed and tuning is not saved to phone. E Nokia Mobile Phones Ltd.
Page 30
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Calculate button (ALT+C): Activate calculation When selections are used, the power value checking is made and if it is not succeeded, error message is shown. Help button (Alt+H): Opens context sensitive help. RF Info button (ALT+I): The current rf state is shown
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 31
NSW-4 Service Software Instructions
PAMS Technical Documentation
Tx I/Q... command Activation Status Bar Text
Alt, T,Q Open TX I/Q Tuning dialog box This function is used for tuning TX I and Q branch DC offset and phase offset. The function opens same Start Tuning dialog as with TX Power Tuning. Start Tuning With list box (ALT+S): Current in PC memory Tuning values are load from program's internal memory. Phone EEPROM Tuning values are load from ME's EEPROM. The next automatic selections are made when this function is activated: Active Unit = TX Operation Mode = analog Low band Channel 190 Power level 4 The TX I/Q Tuning dialog is opened.
TX I/Q Tuning includes the following items: Tune TX I DC Offset scroll bar (ALT+I): The DC Offset is shown as DAC value. With this selection the I branch DC Offset is tuned. The value range is 32...31. Tune TX Q DC Offset scroll bar (ALT+Q): The operation of this function is the same as one above, except with this selection the Q branch DC Offset is tuned. The value range is 32...31.
Page 32
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Tune Phase Difference scroll bar (ALT+P): The operation of this function is the same as one above, except with this selection the Phase Offset is tuned. The value range is 32...31. OK button (ALT+O): Dialog box is closed and tuning is saved to phone. Cancel button (ESC): Dialog box is closed and tuning is not saved to phone. RF Info button (ALT+I): The current rf state is shown Help button (Alt+H): Opens context sensitive help. RSSI Digital (AGC)... command Activation Alt, T, D, H or L Status Bar Text Open the Tuning AGC dialog box
Starts Automatic Gain Control calibration. This means Received Signal Strenght indicators in digital mode. The next automatic selections are made when this tuning function is activated: Active Unit = RX Operation Mode = Continuous digital Selected band Channel 301 (low) or 500 (high ) Power level 2 Eeprom DAC values is shown and the measurement is started by pressing Meas button. Measurement is done in eleven steps: 1. User is requested to put signal generator input level 95 dB and frequency 879.030 MHz 2. Measurement with input level is executed 3. User is requested to put signal generator input level 85 dB and frequency 879.030 MHz 4. Measurement with input level is executed 5. User is requested to put signal generator input level 75 dB and frequency 879.030 MHz 6. Measurement with input level is executed 7. User is requested to put signal generator input level 65 dB and frequency 879.030 MHz 8. Measurement with input level is executed 9. User is requested to put signal generator input level 55 dB and frequency 879.030 MHz E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 33
NSW-4 Service Software Instructions
PAMS Technical Documentation
10. Measurement with input level is executed 11. The AGC tuning dialog will be updated when previous steps are done
AGC tuning dialog includes the following items: RF level AGC List box (ALT+R): DAC values is shown Meas button (ALT+M): The measurement can be started by pressing this button. OK button (ALT+O): Dialog is closed and tuning is saved to phone. Cancel button (ESC): Dialog is closed and tuning is not saved to phone. RF Info button (ALT+I): The current rf state is shown Help button (Alt+H): Opens context sensitive help.
Page 34
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
RSSI Analog... command Activation Alt, T, N Status Bar Text Open the Tuning RSSI dialog box
This function is used for tuning analog RSSI. The next automatic selections are made when this tuning function is activated: Active Unit = RX Operation Mode = analog Power Level OFF Channel 300 Low band Values from Eeprom is shown and the measurement is started when the "meas" button is pressed and it is executed in five steps: 1. User is requested to put signal generator input level 113 dB and frequency 879.300 MHz
2. Measurement with input level is executed 3. User is requested to put signal generator input level 51 dB and frequency 879.300 MHz 4. Measurement with input level is executed 5. The RSSI tuning dialog will be updated when previous steps are done
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 35
NSW-4 Service Software Instructions
PAMS Technical Documentation
RSSI analog tuning dialog has following items:
RSSI value list box DAC values is shown Meas button (ALT+M): The measurement can be started by pressing this button. OK button (ENTER): Dialog is closed and tuning is saved to phone. Cancel button (ESC): Dialog is closed and tuning is not saved to phone. Help button (Alt+H): Opens context sensitive help.
Page 36
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Rx Audio... command Activation Alt, T, R Status Bar Text Starts Rx audio tuning Active Unit = RX Operation Mode = analog Channel 990 Power level OFF low band
The next automatic selections are made when this function is activated:
RX audio tuning dialog includes the following items: Value scroll bar (ALTV) Set Calibration value to phone OK button (ENTER): Dialog is closed and tuning is saved to phone. Cancel button (ESC): Dialog is closed and tuning is not saved to phone. RF Info button (ALT+I): The current rf state is shown Help button (Alt+H): Opens context sensitive help.
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 37
NSW-4 Service Software Instructions
PAMS Technical Documentation
Tx Audio... command Activation Alt, T, T Status Bar Text Starts Tx audio tuning Active Unit = TX Operation Mode = analog Channel 990 Power level 3 low band
The next automatic selections are made when this function is activated:
RX audio tuning dialog includes the following items: Value scroll bar (ALTV) Set Calibration value to phone OK button (ENTER): Dialog is closed and tuning is saved to phone. Cancel button (ESC): Dialog is closed and tuning is not saved to phone. RF Info button (ALT+I): The current rf state is shown Help button (Alt+H): Opens context sensitive help.
Page 38
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Charging... command Activation Alt, T, C Status Bar Text Starts charging tuning Active Unit = RX Operation Mode = analog Power Level = OFF Channel 300 Low band Before charging tuning is started, the battery setting request is shown.
The next automatic selections are made when this function is activated:
Eeprom DAC values is shown and the measurement is started when the "meas" button is pressed.
Charging tuning dialog includes the following items: Values list box: DAC values are shown. Meas button (ALT+M): The measurement can be started by pressing this button. OK button (ENTER): Dialog is closed and tuning is saved to phone. Cancel button (ESC): Dialog is closed and tuning is not saved to phone. Help button (Alt+H): Opens context sensitive help. E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 39
NSW-4 Service Software Instructions
PAMS Technical Documentation
LCD... command Activation Alt, Status Bar Text Opens LCD Display contrast tuning box
Command opens LCD Display Tuning dialog box which contains scrollbar to make display adjustments.
LCD Display Tuning dialog box includes the following items: LCD Contrast scrollbar (ALT+L): Enables user to tune display contrast between 12 and 12. OK button (ENTER): Dialog box is closed and tuning is saved to phone. Cancel button (ESC): Dialog is closed and tuning is not saved to phone. Help button (Alt+H): Opens context sensitive help.
Page 40
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Testing
The Testing sub menu offers functions for ME testing. RF Controls... command Activation Status Bar Text
Alt, E,R Open RF Controls dialog box This function is used for quick RF testing. Command opens RF Controls dialog, which contains data for testing and adjustments.
RF Controls dialog includes the following items: Band group: 800 radio button Select low band 1900 radio button Select high band Operation mode group Analog radio button Select analog mode Digital radio button Select digital mode TX group On radio button Activate tx power Off radio button Deactivate tx power E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 41
NSW-4 Service Software Instructions
PAMS Technical Documentation
Comp/exp group On radio button Set compander on Off radio button Set expander on Audio mode group HF radio button Set audio handsfree mode HP radio button Set audio hand portable mode ST group On radio button Set signalling tone on in analog mode only Off radio button Set signalling tone off in analog mode only SAT group On radio button Set Supervisory Audio Tone on in analog mode only Off radio button Set Supervisory Audio Tone off in analog mode only Audio path group On radio button Set external audio path on Off radio button Set external audio path off Data Flow Type drop list (gray text = feature not active) This list changes the transmission data type. List consists following transmissions: * TDMA mode zero data transmission * TDMA mode random * Continuous digital 11 TX Power Level drop list With this value is possible to change the transmission power. The user can give the needed DAMPS power value (2..10). Channel edit box User can enter here channel number that is used for both transmission and receiving. The frequency of the selected channel is shown after selection. Slot edit box (gray text = feature not active) Value of used time slot in digital mode only DVCC edit box (gray text = feature not active) Value of Digital verification color code in digital mode only Volume drop list Value of audio volume can be selected Apply init button (ALT+A): Accepts INIT group values and validates them. After validation application sends corresponding messages to ME. Close button (ESC) Close dialog
Page 42
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Change phone button (ALT+H) Read production serial number Production SN static Show production serial number Help button (Alt+H): Opens context sensitive help. Self Tests... command Activation Alt, E,S Status Bar Text Open MCU Selftests dialog box
Command is used for reading self test results and running self tests. When the selection is made, the test result is read from ME. The test result will be shown to the user within MCU Selftest dialog.
MCU Selftest dialog box includes following items: Tests list box (ALT+T): Test states are updated according to results received from the phone. Possible test states will be one of the next: Passed Failed No response Not executed RUNNING.... E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 43
NSW-4 Service Software Instructions
PAMS Technical Documentation
Run button (ALT+R): User can select desired test from list and hit Run button. When user selects test to be run the text RUNNING... is shown in test state field. When results are received the test state field is updated according to the result. If no response was received in the defined time, an error message box will be shown and the test state is changed to No response. Run All button (ALT+A): User can run all listed tests. The text RUNNING... is shown in test state field and test is run. When results are received the test state field is updated according to the results. When state field is updated application moves to next test and repeats previous cycle. Only last test is not executed (Power off Test) because it will turn phone power off. Close (ENTER) button: Dialog box is closed. Help button ( Alt+H) Context sensitive help Supported Self Tests The following tests are available: 1 MCU RAM Interface................ 2 MCU RAM Component............... 3 MCU EEPROM Interface............... 4 MCU ROM Checksum............ 5 MCU EEPROM Component............ 6 MCU CCONT Interface..................... 7 Power Off................. 8 MCU CCONT Interrupt................... 9 TXF line........................ A DSP....................... B MCU EEPROM Checksum...................
Page 44
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
ADC Readings... command Activation Alt, E, A Status Bar Text Open ADC Readings dialog box.
Command is used to read and show A/D values from phone. Command opens ADC Readings dialog.
ADC Readings dialog has static text field where measurements are updated to every second. ADC Readings dialog has following items: Close (ENTER) button: Dialog box is closed and tuning is not saved to phone. Help button ( Alt+H) Context sensitive help Following A/D readings are measured: Battery Voltage.........: Charge Voltage..........: Battery Temperature.....: Battery Size............: Vibrator..................: Acessory Detection......: RF Temperature....................: HOOK Info....................: Charge Current........:
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 45
NSW-4 Service Software Instructions
PAMS Technical Documentation
Audio... command Activation Alt, E,U Status Bar Text Open Audio Tests dialog box
Command is used for making Audio Tests.
Audio Tests dialog includes the following items: Buzzer Volume group: Volume On radio button (ALT+V): Turns buzzer on. Volume Off radio button (ALT+O): Turns buzzer off. Internal Audio Loop group: Input group: Internal radio button (ALT+I): Turns on internal input. External radio button (ALT+E): Turns on external input. Output group: Internal radio button (ALT+T): Turns on internal output. External radio button (ALT+X): Turns on external output.
Page 46
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Loop group: Off radio button (ALT+F): Turns audio loop off. On radio button (ALT+N): Turns audio loop on. JBA6 group (Alt+4): On radio button Activate audio box Deactivate loop controlling Off radio button Activate loop controlling Microphone test: Connect a headset in the phone Select Testing > Audio Loop: Internal > External Loop ON Now everything spoken in the mic is heard in the headset. Close button (ESC) Close dialog Help button ( Alt+H) Context sensitive help
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 47
NSW-4 Service Software Instructions
PAMS Technical Documentation
User Interface... command Activation Alt, E,U Status Bar Text Open User Interface Tests dialog box
Allows user to test all display pixels and back lights of attached phone.
Display Tests dialog includes the following items: 1. Test Pattern radio button (ALT+1): In test display 1 half of the indicators are displayed and the display is filled with chessboard letters. 2. Test Pattern radio button (ALT+2): In test display 2 rest of the (compared to test pattern 1) indicators are displayed and the display is filled with inverse chessboard letters. When dialog is closed the phone LCD display is cleared. Close button (ESC) Close dialog Help button ( Alt+H) Context sensitive help
Page 48
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Software
Product Profile... command Activation Status Bar Text
Alt, S,P,L,H Open Product Profile settings dialog box. Function is used for making product profile settings. When command is activated the product profile information is read from EEPROM and Product Profile dialog is opened.
Product Profile dialog includes the following items: Settings list box (ALT+E): A list where user can select desired setting. User can toggle setting with following Options drop list or by double clicking desired setting in list box. Options drop list (ALT+O): List allows user to set options to each settings which are listed in Settings list box. Possible options per setting are: Save File button (ALT+S): Saves all product profile setting to a file. Filename will be asked from the user in a common file save dialog box. Load File button (ALT+L): Loads all product profile setting from a file. Filename will be asked from the user in a common file open dialog box. OK button (ENTER) Selections are accepted and saved to EEPROM. Cancel button (ESC) Selections are ignored and control is returned back to main menu. E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 49
NSW-4 Service Software Instructions
PAMS Technical Documentation
Help button ( Alt+H) Context sensitive help NSW4 Product Profile Settings Field test display........: Dualmode select...........: Calling card..............: Encrypt voice.............: Call forward.............. : Call forward all..........: Call forward on busy......: Call forward not answered.: Call forward not reachable: Call forward cancel all...: Send own caller id........: Call waiting..............: Read text messages........: Write text messages.......: Emergency 9 key...........: Call VMBX key 1...........: Feature code set..........: SMS Privacy...............: SMS disp time temporary...: Keypad cover..............: On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off
Page 50
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Set Default Values... command Activation Alt, S,V Status Bar Text Set default values
Command is used for resetting default values to phone's EEPROM. After selection application asks confirmation:
If Yes is confirmed, the default settings are made to the phone: Warranty info Phone identity Production data edit
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 51
NSW-4 Service Software Instructions
PAMS Technical Documentation
Authority ID... command Activation Status Bar Text
Alt, S,A Open Authority ID dialog box This command is used for programming software authorization data remotely and locally.
The Authority ID dialog box includes the following items: MS ID edit box (ALT+M) Mobile station security id number for remote authority id programming SW ID edit box (ALT+S) Software id number may be needed later with with authority id Not yet supported AUTHORITY ID edit box (ALT+E) Software authority id for remote authority id programming READ MS ID button (ALT+E) Pressing this button updates MS ID edit box from phone Shall be used only for remote programming REQ AUTH ID button (ALT+E) Only for R&D use PROG AUTH ID button (ALT+E) Pressing this button updates value from AUTHORITY ID edit box to phone. Shall be used only for remote programming DO ALL button (ALT+E) Pressing this button updates authority id to phone. This button shall be used when TDF4 (or TDD4) is connected to PC
Page 52
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
OK button (ENTER) Selections are accepted and saved to EEPROM. Cancel button (ESC) Selections are ignored and control is returned back to main menu. Help button ( Alt+H) Context sensitive help Akey... command Activation Status Bar Text Opens Akey code dialog box This command avoids programming Akey to the phone. Not possible to calculate Akey. If programming is successful there is text 'code ok' otherwise 'wrong response'.
The Akey Code dialog box contains the following items: NAM list box Number Module for programming Akey edit field Value of key Set button (ALT +L) Write value to the phone Cancel button (ESC) Closes the dialog box Help button ( Alt+H) Context sensitive help
Issue 1 08/00
E Nokia Mobile Phones Ltd.
Page 53
NSW-4 Service Software Instructions
PAMS Technical Documentation
Flash Phone... command Activation Alt, S,A Status Bar Text Open Authority ID dialog box
This command is used for flashing new software into the phone. While flashing the phone, user is shown approximately flashing time.
The Flash Phone dialog box contains the following items: File Name... edit filed: Diplays file path to be flashed. Flash button (ALT+L) Starts flashing of selected file to the phone. Select File... button (ALT+S) Starts flashing of selected file to the phone. Close button (ESC) Closes the dialog button and does not start flashing. A key Select prod.data Send prod. data __ Help button ( Alt+H) Context sensitive help During flashing status dialog is shown. After phone is flashed Authority ID is set to the phone.
Page 54
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Dealer
The dealer sub menu offers functions for ME settings for dealers. User Settings... command Activation Status Bar Text
Alt, D,U Open User Setting dialog box This command is used for reading, storing, and modifying the user settings and values. After menu selection, the program opens a query dialog box: "Read user settings from phone?". If you answer Yes, all user settings are read from the ME including menu settings. If reading fails, an error dialog box is shown. If reading is OK, the User Settings and Values dialog box is opened.
The User Settings and Values dialog box contains the following items: Security ID edit box (ALT+E): Edit the security code which is saved to the ME memory together with other user settings and values. Only digits are accepted for Security code. Length must be 5 digits. Wake up Message String edit box (ALT+M): Edit Wake up message. The message can contain up to 16 characters. E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 55
NSW-4 Service Software Instructions
PAMS Technical Documentation
Wake up Message Graphics group Save File... button (ALT+S): Opens a common File Save As dialog box and asks for the name of the file to contain user settings and values. Load File... button (ALT+L): Opens a common File Open dialog box, and asks for the name of the file containing the user settings and values. Edit button (ALT+D) Starts Windows Paintbrush to edit the graphical Wake up message bitmap. OK button (ENTER) Selections are accepted and saved to EEPROM. Cancel button (ESC) Selections are ignored and control is returned back to main menu. Help button ( Alt+H) Context sensitive help
Page 56
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Short Code Memory... command Activation Alt, S,C Status Bar Text Open Edit SCM dialog box.
This command is used for reading, storing and modifying the SCM values.
Edit SCM dialog box includes the following items: Loc statix text: Display current location Name edit box (ALT+A): Edit the Name. Number edit box (ALT+N): Edit the number. SCM list box (ALT+C): List for available names and numbers. Write Phone... button (ALT+W): Write SCM values to phone and checks the validity of names and numbers. Read Phone... button (ALT+R): Read SCM values from phone. Save File... button (ALT+S): E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 57
NSW-4 Service Software Instructions
PAMS Technical Documentation
Opens a default Windows File Save As dialog box and asks filename where to save SCM values. Load File... button (ALT+L): Opens a default Windows File Open dialog box and asks filename where from to load SCM values. Checks the validity of names and numbers. OK button (ENTER) Selections are accepted and saved to EEPROM. Cancel button (ESC) Selections are ignored and control is returned back to main menu. Help button ( Alt+H) Context sensitive help
Language Edit SCM y/n
Page 58
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Calling cards... command Activation Status Bar Text Open Calling card dialog box. This dialog enables to program the calling card numbers and operator telephone numbers used in credit card calls.
Calling card numbers dialog includes the following items: Calling Card drop list Card can be selected up to four Card name edit box (ALT+C) Card name can be edited. Prefix edit box (ALT+P) Card prefix can be edited. Access number edit box (ALT+B) Card access number can be edited Card number edit box (ALT+A) Card number can be edited Sending order drop list (ALT+S) Sending order can be selected E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 59
NSW-4 Service Software Instructions
PAMS Technical Documentation
Read Phone... button (ALT+R): Read calling card data from phone and update dialog items Write Phone... button (ALT+W): Write data to calling card data to phone Close... button (ESC) Closes the dialog button. Save File... button (ALT+S) Opens a Windows default File Save As dialog box and asks filename where to save settings. Load File... button (ALT+L) Opens a Windows default File Open dialog box and asks filename where to load settings. Help button ( Alt+H) Context sensitive help
Page 60
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
Subscriber data programming... command Activation Alt, D,S Status Bar Text Open Subscriber data programming dialog box.
On the upper right corner there is a drop down box, where you can select the NAM you want to edit. The per NAM data below is updated according to the highlighted NAM. Note that emergency numbers and lock code are common to all NAMs.
Subcriber data programming dialog includes the following items: Select NAM drop list (ALT+S): The selected position is highlighted Number edit box (ALT+B) The alphanumeric MIN value can be edited Operator edit box (ALT+O): The alphanumeric value can be edited Home SOC edit box (ALT+O: Numeric value can be edited if not locked Home System ID edit box (ALT+H): Numeric value can be edited E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 61
NSW-4 Service Software Instructions
PAMS Technical Documentation
Primary paging ch edit box (ALT+P): Numeric value can be edited Secondary paging ch edit box (ALT+E): Numeric value can be edited Group ID Mark edit box (ALT+G): Numeric value can be edited Access method edit box (ALT+M): Numeric value can be edited Local Option edit box (ALT+L): Numeric value can be edited Overl. Class edit box (ALT+V): Numeric value can be edited Nam status edit box (ALT+N): NAM to enable or disable can be edited Dedic. A CCH start edit box (ALT+A): Numeric value can be edited Dedic. B CCH start edit box (ALT+B): Numeric value can be edited End Numeric value can be edited Emergency numbers edit boxes (ALT+G): The alphanumeric values can be edited Lock code edit box (ALT+D): The alphanumeric value can be edited File Save... button (ALT+S): Opens a default Windows File Save As dialog and asks filename where to save user settings and values. File Load... button (ALT+L): Opens a default Windows File Open dialog and asks filename where from load user settings and values. Read Phone... button (ALT+R): Read selected NAM's values from phone and update dialog items Write phone... button (ALT+W): Write selected NAM's values to phone Close... button (ALT+S): Close dialog Cancel button (ESC): Exit without any changes Help button ( Alt+H) Context sensitive help
Page 62
E Nokia Mobile Phones Ltd.
Issue 1 08/00
PAMS Technical Documentation
NSW-4 Service Software Instructions
P/RSID programming... command Activation Alt, D,R Status Bar Text Open P/RSID programming dialog box.
This command is used to modify the Private and Residential System IDentity values. The list contains up to 5 P/RSIDs.
P/RSID programming dialog includes the following items: P/RSID list box (ALT+P): Index to P/RSID list up to 5 Value edit box (ALT+V) The numeric value of P/RSID SID edit box (ALT+I) E Nokia Mobile Phones Ltd.
Issue 1 08/00
Page 63
NSW-4 Service Software Instructions
PAMS Technical Documentation
The Numeric value of Home system ID stored in the mobile and uniquely associated with a MIN SOC edit box (ALT+O) Spesifies the System operator accociated with a P/RSID Country code edit box (ALT+Y) Numeric values of symbolic value which indicates if this is a Private or Residential Name edit box (ALT+N) The alphanumeric designator accociated with a P/RSID Type list box (ALT+T) Symbolic value which indicates if this is a Private or Residential POF List box (ALT+F) Index to private operating frequencies list up to 4 Band list box Symbolic Value selected POF`s band Channel edit box Numeric value of selected POF's channel DVCC edit box Numeric value of selected POF's module control channel PSP List box (ALT+P) Index to public service profiles list up to 4 Band list box Symbolic Value selected PSP `s band Channel edit box Numeric value of selected PSP's channel DVCC/DCC edit box Numeric value of selected PSP's module control channel Save file button Saves file Load file button Loads file Write phone button Writes values to phone Read phone button Reads phone values Cancel button (ESC): Exit without any changes Help button (ESC) Context sen