Text preview for : HP 87130A Operation and Service Manual.pdf part of Agilent HP 87130A Operation and Service Manual Agilent HP 87130A Operation and Service Manual.pdf
Back to : HP 87130A Operation and S | Home
87130A
Attenuator/Switch Driver
Operating and Service
Guide
Manual part number: 87130-90007
Printed in USA
August 2001
Supersedes: May 2000
Notice
The information contained in this document is subject to change without
notice.
Agilent Technologies makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Agilent Technologies
shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or
use of this material.
Agilent Technologies assumes no responsibility for the use or reliability of
its software on equipment that is not furnished by Agilent Technologies.
This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, published electronically, or translated to another
language without prior written consent of Agilent Technologies.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the U.S. Government is subject to
restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical
Data and Computer Software clause at DFARS 252.227-7013 for DOD
agencies, and subparagraphs (c)(1) and (c)(2) of the Commercial Computer
Software Restricted Rights clause at FAR 52.227-19 for other agencies.
Agilent Technologies, Inc.
1400 Fountaingrove Parkway
Santa Rosa, CA 95403-1799, U.S.A.
NOTE A serial number label is attached to the rear panel of each instrument. The
first six entries are the same for all identical modules; they only change
when a change in the electrical or physical functionality is made. The
remaining digits are assigned sequentially and are different for each
instrument.
This manual applies directly to instruments with the following prefix and
above:
US4018