Text preview for : HP E9320 SERIES OPS.pdf part of Agilent HP E9320 SERIES OPS Agilent HP E9320 SERIES OPS.pdf
Back to : HP E9320 SERIES OPS.pdf | Home
E-Series E9320 Peak
and Average Power
Sensors
Operating and
Service Guide
General
Information contained in this document is subject to
change without notice. Agilent Technologies makes
no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Agilent Technologies shall not be liable for errors
contained herein or for incidental or consequential
damages in connection with the furnishings,
performance, or use of this material. No part of this
document may be photocopied, reproduced, or
translated to another language without the prior
written consent of Agilent Technologies.
Copyright 2003 Agilent Technologies
Station Road, South Queensferry, Scotland, EH30 9TG,
UK.
Agilent Part No. E9321-90001
Printed in USA
June 2007
Legal Information
Certification
Agilent Technologies certifies that this product met its
published specifications at the time of shipment from
the factory. Agilent Technologies further certifies that
its calibration measurements are traceable to the
United States National Institute of Standards and
Technology, to the extent allowed by the Institute's
calibration facility, and to the calibration facilities of
other International Standards Organization members.
2 E-Series E9320 Operating and Service Guide
Safety Symbols
Safety Symbols
The following symbols on the instrument and in the
documentation indicate precautions which must be taken to
maintain safe operation of the instrument.
The Instruction Documentation Symbol. The product
is marked with this symbol when it is necessary for
the user to refer to the instructions in the supplied
documentation.
Safety This guide uses warnings and cautions to denote hazards
Notices
WARNING A warning calls attention to a procedure, practice or the like,
which, if not correctly performed or adhered to, could result in
injury or loss of life. Do not proceed beyond a warning until the
indicated conditions are fully understood and met.
CA UT I ON A caution calls attention to a procedure, practice or the like
which, if not correctly performed or adhered to, could result in
damage to or the destruction of part or all of the equipment.
Do not proceed beyond a caution until the indicated
conditions are fully understood and met.
E-Series E9320 Operating and Service Guide 3
General Safety Information
General Safety Information
The following general safety precautions must be observed
during all phases of operation, service, and repair of this
instrument. Failure to comply with these precautions or with
specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the
instrument. Agilent Technologies assumes no liability for the
customer's failure to comply with these requirements.
WARNING BEFORE CONNECTING THE POWER SENSOR TO OTHER
INSTRUMENTS ensure that all instruments are connected to
the protective (earth) ground. Any interruption of the
protective earth grounding will cause a potential shock
hazard that could result in personal injury.
Sound Emission
Herstellerbescheinigung
Diese Information steht im Zusammenhang mit den
Anforderungen der Maschinenlarminformationsverordnung
vom 18 Januar 1991.