Text preview for : M9393_SoftwareReleaseNotes M9393A Software Release Notes c20141025 [2].pdf part of Agilent M9393 SoftwareReleaseNotes M9393A Software Release Notes c20141025 [2] Agilent M9393_SoftwareReleaseNotes M9393A Software Release Notes c20141025 [2].pdf
Back to : M9393_SoftwareReleaseNote | Home
Software
Release Notes
Keysight
M9393A PXIe Vector Signal
Analyzer
Notice: This document contains references to Agilent. Please note that Agilent's Test and
Measurement business has become Keysight Technologies. For more information, go to
www.keysight.com.
Keysight M9393A Version 1.0.80.1, August 2014
Documentation Defects Fixed
Defect Description
320892 RF Attenuation Change is not proportional to Mixer Level Offset change
338088 Document how to do calibration with 89600 and M9393 hardware
338101 Alert user that no signal should be present on the M9393A during calibration
Software Defects fixed
Defect Description
335782 Alignments fail if conversion mode is not set to Auto
337060 Alignments fail if multiple instances of M9393 in the same process
338698 Corrected trigger qualification of wideband burst trigger for IVI and 89600
332857 89600: Reconnecting to M9393 from 89600 fails in certain sequences
335725 89600: Large span to RBW ratios may generate errors
331064 89600: Certain triggered measurements stall if trigger not received in 1 sec
332469 89600: Incorrect power reading at certain settings when using average detector
336180 89600: Corrected handling of trigger delay limits
339074 89600: Minimum span can be less than 800 Hz
337258 89600: Overlap Percentage error with Gate Trigger and Power Spectrum
339305 Trigger Delay and Holdoff is incorrect or causes errors when used with 89600
Software Release Notes (part number: M9393-90008), page 2 of 2