Text preview for : README_MDM_A.01.03 Readme file.TXT part of Agilent README MDM A.01.03 Readme file Agilent README_MDM_A.01.03 Readme file.TXT
Back to : README_MDM_A.01.03 Readme | Home
======================================================
README.TXT rev.A.01.03.2014.0108
File Converter for IC-CAP MDM File
Agilent B1500A Semiconductor Device Analyzer
Agilent B1505A Power Device Analyzer / Curve Tracer
======================================================
This document contains the following:
* Introduction
* Execution Environment
* Installation Instructions
* Graphical User Interface
* Command Line Interface
* Known Defects
* Revision History
Introduction
============
IC-CAP MDM File Converter provides both Graphical User Interface
(GUI) and Command Line Interface (CLI) to convert the Agilent EasyEXPERT
test result file (.XTR or .ZTR file) to the Agilent IC-CAP MDM file (.MDM file).
Execution Environment
=====================
Microsoft Windows 7, Windows Vista, Windows XP
Note: For Windows XP, .NET Framework 3.5 SP1 is required.
Installation Instructions
=========================
To install MDM File Converter onto your computer, follow the
procedure below:
1. Insert the Desktop EasyEXPERT software CD-ROM into the CD-ROM drive.
2. If needed, double click the index.html file in the CD-ROM.
3. Click "Install MDM File Converter" icon and follow the
instructions of the setup wizard.
4. Wait for installation to complete, and remove the CD-ROM from the
CD-ROM drive.
Graphical User Interface
========================
Graphical User Interface for the MDM file converter is available from the
Windows "Start" menu as:
Start -> All Programs --> Agilent B1500A EasyEXPERT
--> IC-CAP MDM File Converter
Refer to the EasyEXPERT User's Guide to learn how to use the MDM file
converter GUI.
Command Line Interface
======================
You can use the execution file as shown below. The .MDM file will be
created in the current folder by default. If you do not specify the
parameter, this program displays the GUI.
Syntax
------
MdmFileConverter.exe [options] [test result files]
Parameter
---------
(no option) Perform normal operation.
/o <.MDM file> Specify the output .MDM file. Valid only for single input .XTR/.ZTR file.
/d Specify the output folder name where the .MDM files will be created.
/l Specify the conversion log file name.
/s Suppress the output of conversion log.
/t Append the test setup name to the output .MDM file name.
/U Switch Output Force Value conversion option for units of UHC500/UHC1500/HVMC/UHV.
/D Switch Output Force Value conversion option for units of HC/DHC/HV/MC.
/O Switch Output Force Value conversion option for units of other than UHC500/UHC1500/HVMC/UHV/HC/DHC/HV/MC.
test result files: Specify EasyEXPERT test result file (.XTR or .ZTR file) names.
You can specify multiple files by using a space as the separator.
The file names can include wild-card characters.
Execution Examples
------------------
MdmFileConverter.exe E:\Id-Vds.xtr
MdmFileConverter.exe E:\Id-Vds.xtr E:\Id-Vgs.ztr
MdmFileConverter.exe E:\*.xtr E:\*.ztr
MdmFileConverter.exe /o E:\Id-Vds E:\Id-Vds.xtr
MdmFileConverter.exe /d E:\MDM E:\*.xtr E:\*.ztr
MdmFileConverter.exe /d E:\MDM /l E:\conversion.log E:\*.xtr
MdmFileConverter.exe /d E:\MDM /s E:\*.xtr
MdmFileConverter.exe /d E:\MDM /t E:\*.xtr
Known Defects
=============
There are no known defects in this program.
Revision History
================
A.01.00 May 2013 Initial release.
A.01.01 Aug. 2013 Output Force Value conversion option is supported.
A.01.02 Oct. 2013 Setting value calculation is supported for Output Force Value conversion.
A.01.03 Jan. 2014 Parsing of radix character is fixed.
Microsoft, Windows are registered trademarks of Microsoft Corporation. All
other trademarks are the property of their respective owners.
Copyright Agilent Technologies 2013
All rights reserved.