Text preview for : Konica Minolta QMS 3260-4032 chap1to10 Service Manual.pdf part of Konica Minolta Konica Minolta QMS 3260-4032 chap1to10 Service Manual Konica Minolta Konica Minolta QMS 3260-4032 chap1to10 Service Manual.pdf
Back to : Konica Minolta QMS 3260-4 | Home
QMS 3260/4032 Laser Printer
Base Engine
Technical Manual
SER002XA
Release Version 11-97
Blank Page
NOTICE
The information in this manual is subject to change without notice.
QMS, Inc. SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMIS-
SIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
This manual contains information protected by copyright. No par t of this manual may be photo-
copied or reproduced in any form without prior written consent from QMS, Inc..
FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the limits set for a Class B digital
device, as stated in Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with the
instructions provided, this equipment may cause disruptive interference to nearby radio and
television communications. Even if the equipment is installed according to the instructions,
there is no guarantee that interference will not occur in a par ticular installation. If this equipment
does cause disruptive interference to nearby radio and television reception, switch the equip-
ment off to determine if it is the true cause of the interference. If the equipment is the cause of
the interference, the user should try to minimize the interference by using one or more of the fol-
lowing actions: