Text preview for : 4513.pdf part of ON SEMICONDUCTOR 4513 BCD–to–seven segment latch/decoder/driver



Back to : 4513.pdf | Home

MC14513B BCD-To-Seven Segment Latch/Decoder/Driver
CMOS MSI (Low­Power Complementary MOS)
The MC14513B BCD­to­seven segment latch/decoder/driver is constructed with complementary MOS (CMOS) enhancement mode devices and NPN bipolar output drivers in a single monolithic structure. The circuit provides the functions of a 4­bit storage latch, an 8421 BCD­to­seven segment decoder, and has output drive capability. Lamp test (LT), blanking (BI), and latch enable (LE) inputs are used to test the display, to turn­off or pulse modulate the brightness of the display, and to store a BCD code, respectively. The Ripple Blanking Input (RBI) and Ripple Blanking Output (RBO) can be used to suppress either leading or trailing zeroes. It can be used with seven­segment light emitting diodes (LED), incandescent, fluorescent, gas discharge, or liquid crystal readouts either directly or indirectly. Applications include instrument (e.g., counter, DVM, etc.) display driver, computer/calculator display driver, cockpit display driver, and various clock, watch, and timer uses.
http://onsemi.com

18 PDIP­18 P SUFFIX CASE 707 1 A WL, L YY, Y WW, W

MARKING DIAGRAMS
MC14513BCP AWLYYWW

· · · · · · · · · · ·

Low Logic Circuit Power Dissipation High­current Sourcing Outputs (Up to 25 mA) Latch Storage of Binary Input Blanking Input Lamp Test Provision Readout Blanking on all Illegal Input Combinations Lamp Intensity Modulation Capability Time Share (Multiplexing) Capability Adds Ripple Blanking In, Ripple Blanking Out to MC14511B Supply Voltage Range = 3.0 V to 18 V Capable of Driving Two Low­Power TTL Loads, One Low­power Schottky TTL Load to Two HTL Loads Over the Rated Temperature Range.
Symbol VDD Vin I PD TA Tstg IOHmax POHmax Parameter DC Supply Voltage Range Input Voltage Range, All Inputs DC Current Drain per Input Pin Power Dissipation, per Package (2.) Operating Temperature Range Storage Temperature Range Maximum Continuous Output Drive Current (Source) per Output Maximum Continuous Output Power (Source) per Output (3.) Value ­0.5 to +18.0 ­0.5 to VDD + 0.5 10 500 ­55 to +125 ­65 to +150 25 50 Unit V V mA mW °C °C mA mW

= Assembly Location = Wafer Lot = Year = Work Week

ORDERING INFORMATION
Device MC14513BCP Package PDIP­18 Shipping 20/Rail

MAXIMUM RATINGS (Voltages Referenced to VSS) (1.)

This device contains protection circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high­ impedance circuit. A destructive high current mode may occur if Vin and Vout are not constrained to the range VSS v (Vin or Vout) v VDD. Due to the sourcing capability of this circuit, damage can occur to the device if VDD is applied, and the outputs are shorted to VSS and are at a logical 1 (See Maximum Ratings). Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD).

1. Maximum Ratings are those values beyond which damage to the device may occur. 2. Temperature Derating: Plastic "P and D/DW" Packages: ­ 7.0 mW/_C From 65_C To 125_C 3. POHmax = IOH (VDD ­ VOH)

© Semiconductor Components Industries, LLC, 2000

1

August, 2000 ­ Rev. 4

Publication Order Number: MC14513B/D

MC14513B
PIN ASSIGNMENT
B C LT BI LE D A RBI VSS 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 VDD f g a b c d e RBO e d f a g b c

DISPLAY

0

1

2

3

4

5

6

7

8

9

TRUTH TABLE
Inputs RBI X X 1 0 X X X X X X X X X X X X X X X X LE BI X X 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 X 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 LT 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X X 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 X X X 0 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 X X X 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 X X X 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 X + + 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 1 0 1 1 1 1 1 0 0 0 0 0 0 1 0 0 1 1 1 1 1 0 0 1 1 1 0 0 0 0 0 0 Outputs D C B A RBO a b c d e 1 0 0 1 1 0 1 1 1 1 1 1 1 0 0 0 0 0 0 1 0 0 1 0 1 1 0 1 1 0 1 1 0 0 0 0 0 0 * 1 0 0 1 0 1 0 0 0 1 0 1 0 0 0 0 0 0 0 f 1 0 0 1 0 0 0 1 1 1 0 1 1 0 0 0 0 0 0 g 1 0 0 0 0 1 1 1 1 1 0 1 1 0 0 0 0 0 0 Display 8 Blank Blank 0 1 2 3 4 5 6 7 8 9 Blank Blank Blank Blank Blank Blank *

X = Don't Care RBO = RBI (D C B A), indicated by other rows of table *Depends upon the BCD code previously applied when LE = 0

http://onsemi.com
2

MC14513B

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ELECTRICAL CHARACTERISTICS (Voltages Referenced to VSS)
Characteristic Symbol VOL VDD Vdc 5.0 10 15 VOH 5.0 10 15 5.0 10 15 VOH 5.0 10 15 5.0 10 15 VIH 5.0 10 15 5.0 Min -- -- -- 4.1 9.1 14.1 -- -- -- 4.95 9.95 14.95 -- -- -- 3.5 7.0 11 4.1 -- 3.9 -- 3.4 -- 9.1 -- 9.0 -- 8.6 -- 14.1 -- 14 -- 13.6 -- ­ 55_C 25_C 125_C Max Min -- -- -- 4.1 9.1 14.1 -- -- -- 4.95 9.95 14.95 -- -- -- 3.5 7.0 11 4.1 -- 3.9 -- 3.4 -- 9.1 -- 9.0 -- 8.6 -- 14.1 -- 14 -- 13.6 -- Typ (4.) 0 0 0 5.0 10 15 0 0 0 5.0 10 15 2.25 4.50 6.75 2.75 5.50 8.25 4.57 4.24 4.12 3.94 3.70 3.54 9.58 9.26 9.17 9.04 8.90 8.75 14.59 14.27 14.18 14.07 13.95 13.80 Max Min -- -- -- 4.1 9.1 14.1 -- -- -- 4.95 9.95 14.95 -- -- -- 3.5 7.0 11 4.1 -- 3.5 -- 3.0 -- 9.1 -- 8.6 -- 8.2 -- 14.1 -- 13.6 -- 13.2 -- Max Unit Vdc Output Voltage -- Segment Outputs "0" Level Vin = VDD or 0 "1" Level Vin = 0 or VDD Output Voltage -- RBO Output "0" Level Vin = VDD or 0 "1" Level Vin = 0 or VDD Input Voltage (4.) "0" Level (VO = 3.8 or 0.5 Vdc) (VO = 8.8 or 1.0 Vdc) (VO = 13.8 or 1.5 Vdc) (VO = 0.5 or 3.8 Vdc) "1" Level (VO = 1.0 or 8.8 Vdc) (VO = 1.5 or 13.8 Vdc) Output Drive Voltage -- Segments (IOH = 0 mA) Source (IOH = 5.0 mA) (IOH = 10 mA) (IOH = 15 mA) (IOH = 20 mA) (IOH = 25 mA) (IOH = 0 mA) (IOH = 5.0 mA) (IOH = 10 mA) (IOH = 15 mA) (IOH = 20 mA) (IOH = 25 mA) (IOH = 0 mA) (IOH = 5.0 mA) (IOH = 10 mA) (IOH = 15 mA) (IOH = 20 mA) (IOH = 25 mA) VIL 1.5 3.0 4.0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1.5 3.0 4.0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1.5 3.0 4.0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Vdc Vdc VOL 0.05 0.05 0.05 -- -- -- 0.05 0.05 0.05 -- -- -- 0.05 0.05 0.05 -- -- -- Vdc 0.05 0.05 0.05 -- -- -- 0.05 0.05 0.05 -- -- -- 0.05 0.05 0.05 -- -- -- Vdc Vdc Vdc VOH Vdc 10 15 Vdc (continued)

http://onsemi.com
3

MC14513B

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ELECTRICAL CHARACTERISTICS -- continued (Voltages Referenced to VSS)
Characteristic Symbol IOH VDD Vdc 5.0 10 15 IOL 5.0 10 15 5.0 10 15 Iin Cin IDD 15 -- 5.0 10 15 5.0 10 15 ­ 55_C Min Max -- -- -- -- -- -- -- -- -- ± 0.1 -- 5.0 10 20 Min 25_C 125_C Typ (4.) ­ 0.64 ­ 0.34 ­ 1.30 0.29 0.75 2.90 0.88 2.25 8.8 ±0.00001 5.0 0.005 0.010 0.015 Max -- -- -- -- -- -- -- -- -- ± 0.1 7.5 5.0 10 20 Min Max -- -- -- -- -- -- -- -- -- ± 1.0 -- 150 300 600 µAdc pF µAdc mAdc Unit Output Drive Current -- RBO Output (VOH = 2.5 V) Source (VOH = 9.5 V) (VOH = 13.5 V) (VOL = 0.4 V) (VOL = 0.5 V) (VOL = 1.5 V) Sink mAdc ­ 0.40 ­ 0.21 ­ 0.81 0.18 0.47 1.80 0.64 1.6 4.2 -- -- -- -- -- ­ 0.32 ­ 0.17 ­ 0.66 0.15 0.38 1.50 0.51 1.3 3.4 -- -- -- -- -- ­ 0.22 ­ 0.12 ­ 0.46 0.10 0.26 1.0 0.36 0.9 2.4 -- -- -- -- -- Output Drive Current -- Segments (VOL = 0.4 V) Sink (VOL = 0.5 V) (VOL = 1.5 V) Input Current Input Capacitance Quiescent Current (Per Package) Vin = 0 or VDD, Iout = 0 µA Total Supply Current (5.) (6.) (Dynamic plus Quiescent, Per Package) (CL = 50 pF on all outputs, all buffers switching) IOL mAdc IT IT = (1.9 µA/kHz) f + IDD IT = (3.8 µA/kHz) f + IDD IT = (5.7 µA/kHz) f + IDD µAdc 4. Noise immunity specified for worst­case input combination. Noise Margin for both "1" and "0" level = 1.0 Vdc min @ VDD = 5.0 Vdc 2.0 Vdc min @ VDD = 10 Vdc 2.5 Vdc min @ VDD = 15 Vdc 5. The formulas given are for the typical characteristics only at 25_C. 6. To calculate total supply current at loads other than 50 pF: IT(CL) = IT(50 pF) + 3.5 x 10­3 (CL ­ 50) VDDf where: IT is in µA (per package), CL in pF, VDD in Vdc, and f in kHz is input frequency. Input LE and RBI low, and Inputs D, BI and LT high. f in respect to a system clock. All outputs connected to respective CL loads. 20 ns A, B, AND C 90% 50% 1 2f 20 ns 10% VDD VSS VOH VOL 50% DUTY CYCLE ANY OUTPUT 50%

Figure 1. Dynamic Power Dissipation Signal Waveforms

http://onsemi.com
4

MC14513B

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
SWITCHING CHARACTERISTICS (7.) (CL = 50 pF, TA = 25_C)
Characteristic Symbol tTLH VDD Vdc 5.0 10 15 Output Rise Time -- RBO Output tTLH 5.0 10 15 Output Fall Time -- Segment Outputs (7.) tTHL = (1.5 ns/pF) CL + 50 ns tTHL = (0.75 ns/pF) CL + 37.5 ns tTHL = (0.55 ns/pF) CL + 37.5 ns Output Fall Time -- RBO Outputs tTHL = (3.25 ns/pF) CL + 107.5 ns tTHL = (1.35 ns/pF) CL + 67.5 ns tTHL = (0.95 ns/pF) CL + 62.5 ns Propagation Delay Time -- A, B, C, D Inputs (7.) tPLH = (0.40 ns/pF) CL + 620 ns tPLH = (0.25 ns/pF) CL + 237.5 ns tPLH = (0.20 ns/pF) CL + 165 ns tPHL = (1.3 ns/pF) CL + 655 ns tPHL = (0.60 ns/pF) CL + 260 ns tPHL = (0.35 ns/pF) CL + 182.5 ns Propagation Delay Time -- RBI and BI Inputs (7.) tPLH = (1.05 ns/pF) CL + 547.5 ns tPLH = (0.45 ns/pF) CL + 177.5 ns tPLH = (0.30 ns/pF) CL + 135 ns tPHL = (0.85 ns/pF) CL + 442.5 ns tPHL = (0.45 ns/pF) CL + 177.5 ns tPHL = (0.35 ns/pF) CL + 142.5 ns Propagation Delay Time -- LT Input (7.) tPLH = (0.45 ns/pF) CL + 290.5 ns tPLH = (0.25 ns/pF) CL + 112.5 ns tPLH = (0.20 ns/pF) CL + 80 ns tPHL = (1.3 ns/pF) CL + 248 ns tPHL = (0.45 ns/pF) CL + 102.5 ns tPHL = (0.35 ns/pF) CL + 72.5 ns Setup Time tTHL 5.0 10 15 tTHL 5.0 10 15 tPLH 5.0 10 15 tPHL 5.0 10 15 5.0 10 15 5.0 10 15 5.0 10 15 5.0 10 15 5.0 10 15 5.0 10 15 5.0 10 15 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 100 40 30 60 40 30 520 220 130 640 250 175 720 290 200 600 200 150 485 200 160 313 125 90 313 125 90 -- -- -- -- -- -- 260 110 65 1280 500 350 1440 580 400 750 300 220 970 400 320 625 250 180 625 250 180 -- -- -- -- -- -- -- -- -- ns ns ns -- -- -- 270 135 110 540 270 220 ns -- -- -- 125 75 65 250 150 130 ns -- -- -- 480 240 190 960 480 380 ns All Types Typ 40 30 25 Min -- -- -- Max 80 60 50 ns Unit ns Output Rise Time -- Segment Outputs tPLH ns tPHL tPLH ns tPHL tsu ns Hold Time th ns Latch Enable Pulse Width tWL(LE) ns 7. The formulas given are for the typical characteristics only.

http://onsemi.com
5

MC14513B
20 ns INPUT C tPLH OUTPUT g tTLH tTHL VOL 90% 50% 10% tPHL 20 ns VDD VSS VOH

a. Data Propagation Delay: Inputs RBI, D and LE low, and Inputs A, B, BI and LT high.

20 ns INPUT C tPLH OUTPUT RBO tTLH 50% 90% 50% 10% tPHL 90% 10% tTHL

20 ns VDD VSS VOH VOL

b. Inputs A, B, D and LE low, and Inputs RBI, BI and LT high.

20 ns LE 10% tsu INPUT C 50% 90% 50% th

VDD VSS VDD VSS VOH

OUTPUT g VOL

c. Setup and Hold Times: Input RBI and D low, Inputs A, B, BI and LT high.

20 ns 90% 50% tWL(LE) 10%

20 ns

VDD VSS

LE

d. Pulse Width: Data DCBA strobed into latches. Figure 2. Dynamic Signal Waveforms

http://onsemi.com
6

MC14513B
CONNECTIONS TO VARIOUS DISPLAY READOUTS
LIGHT EMITTING DIODE (LED) READOUT
VDD VDD

COMMON CATHODE LED

COMMON ANODE LED 1.7 V

1.7 V

VSS

VSS

INCANDESCENT READOUT
VDD VDD

FLUORESCENT READOUT
VDD

**

DIRECT (LOW BRIGHTNESS)

FILAMENT (SUPPLY) VSS VSS VSS OR APPROPRIATE VOLTAGE BELOW VSS.

GAS DISCHARGE READOUT
VDD APPROPRIATE VOLTAGE

LIQUID CRYSTAL (LC) READOUT
VDD EXCITATION (SQUARE WAVE, VSS TO VDD)

1/4 OF MC14070B

VSS ** A filament pre­warm resistor is recommended to reduce filament thermal shock and increase the effective cold resistance of the filament.

VSS Direct dc drive of LC's not recommended for life of LC readouts.

http://onsemi.com
7

MC14513B
LOGIC DIAGRAM
BI 4 15 a A 7 14 b 13 c B 1 12 d 11 e 17 f C 2 16 g LT 30 D 6 RBI 8 10 RBO

LE 5

http://onsemi.com
8

MC14513B
TYPICAL APPLICATIONS FOR RIPPLE BLANKING
LEADING EDGE ZERO SUPPRESSION
DISPLAYS

CONNECT TO

a-- - -- g RBO B A 1

a-- - -- g RBI D C RBO B A 1

a-- - -- g RBI D C RBO B A 0

a-- - -- g RBI D C B RBO A 0

a-- - -- g RBI D C B RBO A 0

a-- - - -g RBI D C B RBO A 0

RBI VDD (1) D C

MC14513B INPUT CODE 0 0 (0) 0 0 0

MC14513B 0 (0) 0 0 0

MC14513B 1 (5) 0 1 0

MC14513B 0 (0) 0 0 0

MC14513B 0 (1) 0 1 0

MC14513B 0 (3) 1 1

TRAILING EDGE ZERO SUPPRESSION
DISPLAYS

0

a-- - -- g RBO D C RBI B A 0

a -- - -- g RBO D C RBI B A 0

a -- - --g RBO D C RBI B A 0

a-- - -- g RBO D C RBI B A 1

a -- - --g RBO D C B RBI A 1

a -- - --g RBO D C B RBI A

CONNECT TO VDD (1)

MC14513B 0 1 (5) 0 1 0

MC14513B 0 (0) 0 0 0

MC14513B 0 (1) 0 1 0

MC14513B 0 (3) 1 1 0

MC14513B 0 (0) 0 0 0

MC14513B 0 (0) 0 0 INPUT CODE

http://onsemi.com
9

MC14513B
PACKAGE DIMENSIONS

PDIP­18 P SUFFIX PLASTIC DIP PACKAGE CASE 707­02 ISSUE C
NOTES: 1. POSITIONAL TOLERANCE OF LEADS (D), SHALL BE WITHIN 0.25 (0.010) AT MAXIMUM MATERIAL CONDITION, IN RELATION TO SEATING PLANE AND EACH OTHER. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 4. CONTROLLING DIMENSION: INCH. DIM A B C D F G H J K L M N INCHES MIN MAX 0.875 0.915 0.240 0.260 0.140 0.180 0.014 0.022 0.050 0.070 0.100 BSC 0.040 0.060 0.008 0.012 0.115 0.135 0.300 BSC 0_ 15_ 0.020 0.040 MILLIMETERS MIN MAX 22.22 23.24 6.10 6.60 3.56 4.57 0.36 0.56 1.27 1.78 2.54 BSC 1.02 1.52 0.20 0.30 2.92 3.43 7.62 BSC 0_ 15 _ 0.51 1.02

J
18 1 10

B
9

L

A C

M

N F H G D
SEATING PLANE

K

http://onsemi.com
10

MC14513B

Notes

http://onsemi.com
11

MC14513B

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303­675­2175 or 800­344­3860 Toll Free USA/Canada Fax: 303­675­2176 or 800­344­3867 Toll Free USA/Canada Email: [email protected] Fax Response Line: 303­675­2167 or 800­344­3810 Toll Free USA/Canada N. American Technical Support: 800­282­9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor ­ European Support German Phone: (+1) 303­308­7140 (Mon­Fri 2:30pm to 7:00pm CET) Email: ONlit­[email protected] French Phone: (+1) 303­308­7141 (Mon­Fri 2:00pm to 7:00pm CET) Email: ONlit­[email protected] English Phone: (+1) 303­308­7142 (Mon­Fri 12:00pm to 5:00pm GMT) Email: [email protected] EUROPEAN TOLL­FREE ACCESS*: 00­800­4422­3781 *Available from Germany, France, Italy, UK CENTRAL/SOUTH AMERICA: Spanish Phone: 303­308­7143 (Mon­Fri 8:00am to 5:00pm MST) Email: ONlit­[email protected] ASIA/PACIFIC: LDC for ON Semiconductor ­ Asia Support Phone: 303­675­2121 (Tue­Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001­800­4422­3781 Email: ONlit­[email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4­32­1 Nishi­Gotanda, Shinagawa­ku, Tokyo, Japan 141­0031 Phone: 81­3­5740­2745 Email: [email protected] ON Semiconductor Website: http://onsemi.com

For additional information, please contact your local Sales Representative.

http://onsemi.com
12

MC14513B/D