Text preview for : LMU-TK12ATC.pdf part of Sanyo LMU-TK12ATC LMU-TK12ATC Industrial LCD Monitor Service Manual
Back to : LMU-TK12ATC.rar | Home
SERVICE MANUAL
LMU-TK12ATC (With Touch Panel)
INDUSTRIAL MONITOR (GENERAL)
PRODUCT CODE NO.
LMU-T 12ATC/SS 1 938 102 12
LMU-TK12ATC(K)/SS 1 938 102 37
LMU-TK12ATC(K)/UK 1 938 102 38
REFERENCE NO. SM 920016
INDEX
Page
PRECAUTIONS ---------------------------------------------------------------------------------- 2
1, MAIN SPECIFICATION --------------------------------------------------------------------- 3
2, TROUBLE SHOOTING ---------------------------------------------------------------------- 4,5
3, MAINTENANCE
Disassembling the major components ------------------------------------------------------ 6
4, BLOCK DIAGRAM ---------------------------------------------------------------------------- 7
5, CONNECTION DIAGRAM ------------------------------------------------------------------ 8
6, TABLE OF SIGNAL NAME ----------------------------------------------------------------- 9,10
7, EXPLODED VIEW AND PARTS LIST
7-1Exploded View --------------------------------------------------------------------------- 11
7-2 Parts List ------------------------------------------------------------------------------------- 12-14
8, APPENDIX ------------------------------------------------------------------------------------- 15
Refer to the separate volume user's guide for instruction.
-1-
PRECAUTIONS
Placement precautions
l Avoid placing the unit in humid or dusty places, or where it will be exposed to excessive heat
(direct sunlight, heaters, etc.)
l Do not step on or set anything on the AC cord.
DAMAGE TO THE AC CORD IS A SAFETY RISK AND CAN CAUSE A FIRE.
l Do not connect the unit to the same AC as outlet with appliances that generate large amounts of
interference (such as heaters with thermostats, appliances with motors, etc.). It is best to use a
completely separate electrical outlet.
l Keep the unit away from water. If water accidentally enters the unit, unplug the AC power cord
immediately. DO NOT PLUG IN THE UNIT AGAIN.
Handling precautions
l Avoid bending, kinking or damaging the AC power cord.
l Never insert or remove the power cord with wet hands. Also, be sure to hold cord by the plug when
removing it from the outlet.
l Do not remove any parts that are held in place with screws. (The unit does not contain any user
serviceable items.)
l Maintain standard room temperature (5oC to 40 oC, or 41oF to 104 oF) during use. Do not subject the
unit to shock or vibration. Do not move the unit while it is in use.
l A rapid increase in room temperature in cool weather can cause condensation to from inside the unit.
If this occurs, wait at least 15 minutes after turning the unit on before attempting to operate it.
-2-
1.MAIN SPECIFICATION
Display
Liquid Crystal Panel: TFT
Display Size: 12.1''
Pixel Configuration: 800 x 600
Pixel Pitch: 0.308 x 0.308 mm
Brightness: 200 cd/m2 max.
Response Time: 50 ms
Contrast: 150 : 1 typ.
Angle of Visibility: Left 60 degrees,Right 60 degrees, Up 30 degrees, Down 45 degrees.
Video Control
Vertical signal 55 - 77Hz
Horizontal signal: 24 - 61 kHz
Colors: 16.19 million
Adjustment Functions: BRIGHTNESS, DOT-CLOCK, PHASE, H-POSITION, V-POSITION,
LEVEL, R-LEVEL, G-LEVEL, B-LEVEL
Plug & Play: VESA DDC1, DDC2B
Power Management: VESA DPMS
Touch Panel
Type: Resistive (LMU-TK12AT) Capacitive (LMU-TK12ATC)
Electrical Resolution: 10bit (1024 x 1024)
Communication: Bi-directional asynchronous RS-232C serial communication
Physical
Input: Video 15pin mini D-SUB
Serial 9pin D-SUB
Power DC jack
Dimensions(Exclude Stand): 295 (W) x 233 (D) x 42 (H) mm
Weight: 2 kg (LMU-TK12AT) 2.2kg (LMU-TK12ATC)
Operating Conditions: Operating Temperature Operating: 5°C to 40°C
Storage: 20°C to 60°C
Humidity: 30% to 85% RH (no condensation)
LMU-TK12AT LMU-TK12ATC
Power Supply: Model GI40-US1225 GI40-US1225
/AC Adapter: Input 100-240V 50-60Hz 100-240VAC 1.0A-0.55A, 50-60Hz
Output 12v 2.6A DC 12v 2.5A
Power Consumption: 20 W (5W in Energy Saving mode)
- 3 -
2. TROUBLE SHOOTING
The "TROUBLESHOOTING for LCD Monitor" is described in below. Please refer to the manual "TROUBLE SHOOTING
for Touch-Screen" in CD-ROM.
No. SYMPTOM CHECK POINTS TREATMENTS
1 No Picture with Power 1 Is the Power to a LCD monitor "ON"? Check AC outlet, AC cord, DC Jack and
Indicator OFF Power switch for a LCD monitor
2 Is an AC Adapter defective? Replace an AC Adapter with the new
one
3 Is the wire harness between main PCB Check the connection
and DC-IN PCB secured firmly ?
4 The Power Supply circuit on main PCB Replace the main PCB with the new one
may be defective
2 No Picture with Power 1 Is the Power to a computer "ON"? Check AC outlet, AC cord, DC Jack and
Indicator in Amber Power switch for a computer
2 Is a computer standing by ? Be out of standing by condition, by
operating to a computer
3 The Image Processing circuit on main Replace the main PCB with the new one
PCB may be defective
3 No Picture with Power 1 Is a screen saver programming Press any key or touch the mouse, to
Indicator in Green running ? end the screen saver program
2 Is a signal cable connected securely ? Check the connection of a signal cable
3 Disconnected a signal cable ? or Bent a Replace a signal cable with the new one
terminal pin ?
4 Is the computer's signal timing not Adjust the computer's signal timing, if
agreeable to the LCD's specification ? possible
5 Is the wire harness between Inverter Check the connection of wire harness
PCB and a LCD module secured
firmly ?
6 Is the wire harness between main PCB Check the connection of wire harness
and Inverter PCB secured firmly ?
7 The Brightness control volume may be Replace the Volume PCB with new one,
defective and check the screen
8 The LCD module may be defective Replace a LCD module with the new
one
9 The Inverter unit may be defective Replace an Inverter unit with the new
one
10 The display circuit on main PCB may Replace the main PCB with the new one
be defective ?
4 No Picture with Power 1 Is a computer standing by ? Be out of standing by condition, by
Indicator blinking in operating to a computer
Green
2 Is a signal cable connected securely ? Check the connection of a signal cable
3 Disconnected a signal cable ? or Bent a Replace a signal cable with the new one
terminal pin ?
It is possible to treated by end-user
It must be treated by Professional Technical Staff
It might be possible to treat by end-user in some case.
-4-
No. SYMPTOM CHECK POINTS TREATMENTS
5 White/Grey on whole 1 Is the wire harness between main PCB Check the connection of wire harness
screen and LCD module secured firmly ?
(Nothing on screen) 2 Is the LCD module defective ? Replace a LCD module with the new
one
3 Is the main PCB defective ? Replace the main PCB with the new one
6 Screen's display range 1 Is the adjustment for screen performed Adjust the screen correctly
is incorrect correctly ?
2 Is the output level on image from a Check the specification of a computer
computer not agreeable to LCD's
specification ?
3 Is the size of screen set correctly ? Set the size of screen again(refer to
User's Manual for computer)
7 Screen is distorted 1 Is the adjustment for screen performed Adjust the screen correctly
correctly ?
2 Is a signal cable connected securely ? Check the connection of a signal cable
3 Is a sig nal cable extended ? Don't extend a signal cable
4 Is the output level on image from a Check the specification of a computer
computer not agreeable to LCD's
specification ?
5 The Image Processing circuit on main Replace the main PCB with the new one
PCB may be defective
8 Part of colors(R/G/B) is 1 Is a signal cable connected securely ? Check the connection of a signal cable
not displayed
Black line is appeared 2 Is the connection between main PCB Check the connector
vertically
and a LCD module securely ?
3 The Image Processing circuit on main Replace the main PCB with the new one
PCB may be defective
It is possible to treated by end-user
It must be treated by Professional Technical Staff
It might be possible to treat by end-user in some case
-5-
3 MAINTENANCE
Disassembling the major components
(1) Cabinet
1. Unscrew to secure the cabinet (8-position)
2. Pull the cabinet upward to remove it
(2) LCD Panel and Touch Panel
1. The Touch panel is on the LCD panel. The clearance between the Touch Panel and
the bottom case are filled with 8 rubber pieces. Pull the right side of the Touch panel
upward carefully, then turn it over at the left side of the bottom case.
2. Unscrew to secure the LCD panel (4-position)
3. Pull the LCD panel up carefully. Disconnect the FPC from main PCB, and pull the
connector out to inverter unit.
4. Unscrew to secure the earth terminal (1-position)
5. Disconnect the cable on the main PCB (Orange, Grey)
6. Disconnect the cable on the Touch controller PCB
(3) Inverter Unit
1. Unscrew to secure the Inverter Unit (3-position)
2. Disconnect the cable from the main PCB
(4) Main PCB
1. Pull the RGB signal cable out
2. Unscrew to secure the main PCB (4-position)
3. Disconnect the cables on the main PCB (6-position)
/ Two cables have already been disconnected
/ One connector from the Joint PCB
/ One connector from the VR PCB
/ One connector from the DC-IN PCB
/ One connector from the Inverter PCB
4. Unscrew to secure the bracket for RGB Connector (2-position)
(5) Touch Controller PCB
1. Unscrew to secure the Touch controller PCB (2-position)
2. Disconnect the serial cable
(6) Serial Cable (Connector and Cable with bracket)
1. Unscrew to secure the bracket for serial cable (2-position)
(7) Joint PCB
1. Unscrew to secure the Joint PCB (2-position)
2. Disconnect the cables from the main PCB and the LED PCB
(8) VR PCB
1. Unscrew to secure the VR PCB (2-position)
2. Disconnect the cable to the main PCB
(9) DC-IN PCB
1. Unscrew to secure the DC-IN PCB (2-position)
2. Disconnect one cable from Power Switch, and another cable from the main PCB
(10) Power Switch
1. Remove the Power Switch, while pressing the hook of the Power Switch
(11) LED PCB
1. Unscrew to secure the LED PCB (1-position)
2. One cable has already been disconnected.
4 BLOCK DIAGRAM
OSD Key EEROM
V
Micro LED
Controller
ROM
PLL
H
SVGA
TFT
Video Video
LCD
Amp Controller
Panel
Cheetah 2
R
ADC
G Clock Gen.
Volume Inverter
B
RS232C Control Board Touch Screen
-7-
-8-
N.C. 1 1 N.C.
N.C. 6 6 N.C.
2 2
7 7
3 3 RTS LL
1 12
8 8 RXD UL
JP1
JP2
2 11
N.C. 4 4 N.C. TXD LR
3 10
N.C. 9 9 N.C. CTS UR
TXD
4 9
RXD
RTS
CTS
5 5 GND BACK
5 8
N.C. +12V
6 7
N.C. CHASSIS GND
7 6
POWER GND
NC
5
DCD
N.C.
4
N.C.
1
DSR 6
2
7
3
8
DTR 4
9
GND 5
3
N.C.
2
N.C.
1
Touch Screen
Controller
8 GND
15 SCL
7 GND
14 VSYNC
6 GND
13 HSYNC
5 GND
12 SDA
4 N.C.
11 N.C.
3 BLUE
Personal
10 GND
Computer
2 GREEN
9 N.C.
1 RED
Touch Screen
2
1
P8
GND 8
SCL 15
GND 7
VSYNC 14
GND 6
HSYNC 13
GND 5
SDA 12 VSS
P6
1 1
N.C. 4 DCLK
2 2
N.C. 11 VSS
3 3
BLUE 3 HSYNC
4 4
GND 10 VSYNC
5 5
GREEN 2 VSS
6 6
N.C. 9 VSS
7 7
RED 1 VSS
8 8
R0
9 9
R1
10 10
Switch
R2
11 11
VSS
12 12
R3
13 13
VR1 R4
P5
1 1 14 14
VRC R5
P.C.B
CN6
2 2 15 15
VR2 VSS
3 3 16 16
Volume
VSS
17 17
VSS
18
SANDDUNE 1
18
External OSD
G0
19 19
G1
P4
20 20
G2
21 21
VSS
22 22
G3
23 23
G4
24 24
Display
G5
25 25
VSS
26 26
VSS
27 27
MENU MENU VSS
1 1 1 28 28
SEL SEL B0
2 2 2 29 29
TFT 12-inch
DOWN DOWN B1
P.C.B
3 3 3 30 30
UP UP B2
P2
4 31
Liquid Crystal
4 4 31
CN502
GND GND VSS
P.C.B
5 5 5 32 32
LED-R B3
Interface
6 6 33 33
CN501
VCC B4
Analogue
7 7 34 34
LED-G B5
8 8 35 35
VSS
36 36
DE
Connector
37 37
TEST
38 38
VDD
39 39
CN503
VDD
40 40
N.C.
41 41
3
2
1
RED
GND
GREEN
3
2
1
P7
P1
CN401
2
1
5
4
3
2
1
LED
GND
+12V
P.C.B
H.V
LGND
VR2
VR1
GND
+12V
ON (5V)
P.C.B
DC IN
N.C.
CN202
2
1
5
4
3
2
1
3
2
1
1
2
Power Switch
CN1
CN2
CN201
J201
Unit
Inverter
AC
AC
Plug
Adapter
5. CONNECTION DIAGRAM
6. TABLE OF SIGNAL NAME
Symbol Signal Name Location Notes
DCLK Data Clock P4-2
HSYNC Horizontal Sync. P4-4 This signal is invalid, input H or L.
VSYNC Vertical Sync. P4-5 This signal is invalid, input H or L.
R0 Red Data (LSB) P4-9
R1 Red Data P4-10
R2 Red Data P4-11
R3 Red Data P4-13
R4 Red Data P4-14
R5 Red Data (MSB) P4-15
G0 Green Data (LSB) P4-19
G1 Green Data P4-20
G2 Green Data P4-21
G3 Green Data P4-23
G4 Green Data P4-24
G5 Green Data (MSB) P4-25
B0 Blue Data (LSB) P4-29
B1 Blue Data P4-30
B2 Blue Data P4-31
B3 Blue Data P4-33
B4 Blue Data P4-34
B5 Blue Data (MSB) P4-35
DE Data Enable (positive) P4-37
TEST Display test P4-38 For display test, to be L.
VDD Power Supply P4-39 3.3V
VDD Power Supply P4-40 3.3V
VIN Inverter Power P1-1 12V
VR1,2 Controlled Voltage P13,4
ON Back Light Control P1-5 H : Light ON
VR1,2 Brightness Volume P5-1,3
VRC Brightness Volume P5-2
MENU MENU Key P2-1
SEL SELECT Key P2-2
DOWN DOWN Key P2-3
UP UP Key P2-4
LED-R LED Red P2-6
LED-G LED Green P2-8
RED VIDEO Red Signal P6-1
GREEN VIDEO Green Signal P6-2
BLUE VIDEO Blue Signal P6-3
HSYNC Horizontal Sync. P6-13
VSYNC Vertical Sync. P6-14
SDA DDC Data P6-12
SCL DDC Clock P6-15
VR1,2 Controlled Voltage P1-3,4
ON Back Light Control P1-5 H : Light ON
-9-
6. TABLE OF SIGNAL NAME
Touch Screen Controller
Symbol Signal Name Location Notes
RTS Request To Send JP1-1
RXD Receive Data JP1-2
TXD Transmit Data JP1-3
CTS Clear To Send JP1-4
DCD Data Carrier Detect NC
DTR Data Terminal Ready NC
GND Signal ground NC
DSR Data Set Ready NC
GND Chassis (earth) ground NC
UR Upper right (UR) corner JP2-9
LR Lower right (LR) corner JP2-10
UL Upper left (UL) corner JP2-11
LL Lower left (LL) corner JP2-12
- 10 -
7. EXPLODED VIEW AND PART RLIST
(LMU-TK12ATC/SS)
(LMU-TK12ATC(K)/SS)
(LMU-TK12ATC(K)/UK)
1
41
42
36
6
46
LCD
1
44 40 21
8
31
34 24 PCB
1
4
PCB
47 5 29
43
37
5
25
39
27
PCB
45 2
5 30
2
7 3
35
33
4
PCB
3
28 PCB
26 S1 4
- 11 -
7-2. PARTS LIST
[LMU-TK12ATC/SS]
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol ÅI in the parts list and the schematic
diagram designate components in whitch safety can be of special significance. When replacing a component identified with ÅI use only the replacement
parts designated, or parts with the same ratings of resistance, wattage or voltage that are designated in the parts list in this manual.
Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably insulated from the supply circuit before
returning the product to the customer.
Ref. No. PART No. DESCRIPTION Q'ty Ref. No. PART No. DESCRIPTION Q'ty
OUTER CLAMP-MAIN-CHASSIS
411 001 8702 SCR BIN 3X6 1
632 872 2563 OUTER CARTON,TC(K) 1 CHASSIS - LED PCB
632 758 4209 LABEL, BAR CODE 1 411 001 8702 SCR BIN 3X6 4
LCD - CHASSIS
INDIVIDUAL 632 888 1598 LABEL, TIK 1
4 632 872 9777 PLATE SPRING, EARTH 4
632 872 2570 PAD, BOTTOM 1 LCD - BOTTOM
632 872 2587 PAD, SIDE 1 5 632 250 0655 WIRE FIXTURE 2
632 872 2594 PAD, ACCESSORY 1 411 030 5000 SCR BIN 2X3 1
632 872 2600 PAD, TOP 1 WIRE FIX.-CHASSIS
632 298 2376 POLYETHYLENE BAG 1 6 632 887 8260 CUSHION, FELT, FELT 1
SERIAL CABLE CNT TOUCH PANEL CN
632 822 4425 POLYETHYLENE BAG, 300X450 1
632 607 4824 POLYETHYLENE BAG,L180X270 1
MANUAL
CHARGER
632 567 2588 POLYETHYLENE BAG, 200X300 1 7 661 020 3398 STAND ASSY 1
RGB CABLE 411 041 8700 SCR PAN 3X6 2
632 607 4824 POLYETHYLENE BAG,L180X270 1 632 607 4732 POLYETHYLENE BAG,L 70X100 1
SERIAL CABLE 632 607 4855 POLYETHYLENE BAG,L 260X380 1
ACCESSORY CHASSIS ELC.
41 632 860 9925 FLOPPY DISK 1 21 632 880 1442 FPC BOARD ASS'Y 1
42 632 867 2325 CD-ROM DISK, TOUCHWARE 1 24 632 868 6261 WIRE HARNESS, MAIN-INV. 1
632 869 1968 INSTRUCTION MANUAL,ENGLIS 1 25 632 873 7796 WIRE HARNESS, MAIN-VOLUME 1
632 892 8422 LEAFLET, ADAPTOR 1 26 632 868 6247 WIRE HARNESS, MAIN-DC IN 1
632 869 1975 INSTRUCTION MANUAL,GERMAN 1 27 632 837 2713 CORE 1
661 000 1031 LEAFLET, CE 1 HARNESS MAIN-DC IN
43 632 880 5488 AC ADAPTOR 1 28 632 873 7802 WIRE HARNESS, DC IN-PWR 1
44 632 873 4696 VGA CABLE, 150CM 1 29 632 869 6796 WIRE HARNESS, MAIN-JOINT 1
45 632 866 8397 SERIAL CABLE, 1.8M 1 40 661 002 9882 CORE 1
46 632 876 9834 REMOTE CONTROLLER ASS'Y 1 30 661 037 0113 DC-AC INVERTER ASSY 1
632 875 1815 CONTROLL BOX 1 31 632 861 4868 CABLE, RS232C 1
632 876 9841 LABEL, 1 33 661 001 2570 SPECIAL SCREW,CABLE 2
632 887 7072 CORE, 50 1 34 632 889 5083 BRACKET, SERIAL,CABLE 1
OR 661 001 7278 CORE 1 35 632 773 6011 SPECIAL SCREW,P6(VGA) 2
OR 632 876 0480 CORE, 50 1 LCD1 632 884 7655 LIQUID CRYSTAL DISPLAY, 1
47 ÅI 632 873 0926 AC CORD, 1 36 661 021 0624 TOUCH SENSOR ASSY 1
47 OR ÅI 632 880 1596 AC CORD, 1.8M 1 37 632 886 2443 SERIAL CONTROLLER 1
S1 632 887 8024 SEESAW SWITCH 1
CABINET 39 632 873 4139 GASKET 2
1 632 880 1336 TOP LID ASSY 1 MAIN P.C.B. ASSEMBLY
CHASSIS PCB1 661 019 8946 PW BOARD ASSY, MAIN 1
2 661 037 0427 BOTTOM LID ASSY 1 VR P.C.B. ASSEMBLY
3 632 868 5615 BASE, CUSHION 2
411 001 8702 SCR BIN 3X6 2 PCB2 632 843 3469 PW BOARD ASS'Y, VR 1
CHASSIS - DC-IN
411 030 8803 SCR BIN 2.5X6,CHASSIS-VR 2 DC IN P.C.B. ASSEMBLY
411 030 6403 SCR BIN 2X5 3
CHASSIS - INV. PCB3 632 873 4146 PW BOARD ASS'Y, DC IN 1
411 030 6403 SCR BIN 2X5 2
CHASSIS - JOINT LED P.C.B. ASSEMBLY
411 001 8702 SCR BIN 3X6 2
CHASSIS - CONTROL PCB4 632 869 5256 PW BOARD ASS'Y, LED 1
411 001 8702 SCR BIN 3X6 3
CHASSIS - MAIN JOINT P.C.B. ASSEMBLY
411 008 0402 WASHER OUT TW 3 1 PCB5 632 869 5263 PW BOARD ASS'Y, JOINT 1
8 632 886 5789 CLAMP 1
411 001 8900 SCR BIN 3X8 1
NOTES: 1. Part orders must contain Model Number, Part Number and Description.
2. Ordering quantity of screws and resistors must be multiple of 10 pcs.
3. Regular type resistor and capacitor are omitted. Check the schematic diagram for these values.
- 12 -
[LMU-TK12ATC(K)/SS]
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol ÅI in the parts list and the schematic
diagram designate components in whitch safety can be of special significance. When replacing a component identified with ÅI use only the replacement
parts designated, or parts with the same ratings of resistance, wattage or voltage that are designated in the parts list in this manual.
Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably insulated from the supply circuit before
returning the product to the customer.
Ref. No. PART No. DESCRIPTION Q'ty Ref. No. PART No. DESCRIPTION Q'ty
OUTER 8 632 886 5789 CLAMP 1
411 001 8900 SCR BIN 3X8 1
632 872 2563 OUTER CARTON,TC(K) 1 CLAMP-MAIN-CHASSIS
632 758 4209 LABEL, BAR CODE 1 411 001 8702 SCR BIN 3X6 1
CHASSIS - LED PCB
INDIVIDUAL 411 001 8702 SCR BIN 3X6 4
LCD - CHASSIS
632 872 2570 PAD, BOTTOM 1 4 632 872 9777 PLATE SPRING, EARTH 4
632 872 2587 PAD, SIDE 1 LCD - BOTTOM
632 872 2594 PAD, ACCESSORY 1 5 632 250 0655 WIRE FIXTURE 2
632 872 2600 PAD, TOP 1 411 030 5000 SCR BIN 2X3 1
632 298 2376 POLYETHYLENE BAG 1 WIRE FIX.-CHASSIS
SERIAL CABLE CNT 6 632 887 8260 CUSHION, FELT, FELT 1
632 822 4425 POLYETHYLENE BAG, 300X450 1 TOUCH PANEL CN
632 607 4824 POLYETHYLENE BAG,L180X270 1
MANUAL
632 567 2588 POLYETHYLENE BAG, 200X300 1
CHARGER
RGB CABLE 7 661 020 3398 STAND ASSY 1
632 607 4824 POLYETHYLENE BAG,L180X270 1 411 041 8700 SCR PAN 3X6 2
SERIAL CABLE 632 607 4732 POLYETHYLENE BAG,L 70X100 1
632 607 4855 POLYETHYLENE BAG,L 260X380 1
ACCESSORY
41 632 860 9925 FLOPPY DISK 1
CHASSIS ELC.
42 632 867 2325 CD-ROM DISK, TOUCHWARE 1 21 632 880 1442 FPC BOARD ASS'Y 1
632 869 1968 INSTRUCTION MANUAL,ENGLIS 1 24 632 868 6261 WIRE HARNESS, MAIN-INV. 1
632 892 8422 LEAFLET, ADAPTOR 1 25 632 873 7796 WIRE HARNESS, MAIN-VOLUME 1
632 869 1975 INSTRUCTION MANUAL,GERMAN 1 26 632 868 6247 WIRE HARNESS, MAIN-DC IN 1
661 000 1031 LEAFLET, CE 1 27 632 837 2713 CORE 1
43 632 880 5488 AC ADAPTOR 1 HARNESS MAIN-DC IN
44 632