Text preview for : Panel_NEC_NL128102BC29-01C_0_[DS].pdf part of . Various Panel NEC NL128102BC29-01C 0 [DS] . Various LCD Panels Panel_NEC_NL128102BC29-01C_0_[DS].pdf
Back to : Panel_NEC_NL128102BC29-01 | Home
Global LCD Panel Exchange Center www.panelook.com
TFT COLOR LCD MODULE
NL128102BC29-01B
NL128102BC29-01C
48.0 cm (19.0 Type)
SXGA
LVDS interface (2port)
DATA SHEET
DOD-PD-0744 (1st edition)
All information is subject to change without notice.
Please confirm the sales representative before
starting to design your system.
Document Number: DOD-PD-0744 (1st edition) 1 NEC LCD Technologies, Ltd.
Published date: December 2004 CP(N) 2004 All rights reserved.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
NL128102BC29-01B/01C
INTRODUCTION
No part of this document shall be copied in any form or by any means without the prior written consent
of NEC LCD Technologies, Ltd. (hereinafter called "NEC").
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a product described herein or any other liability arising
from use of such application. No license, express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC or of others.
While NEC has been making continuous effort to enhance the reliability of its products, the possibility
of failures cannot be eliminated entirely. To minimize risks of damage to property or injury to person
arising from a failure in an NEC product, customers must incorporate sufficient safety measures in their
design, such as redundancy, fire-containment and anti-failure features.
NEC products are classified into the following three quality grades:
"Standard", "Special", "Specific"
The "Specific" quality grade applies only to applications developed based on a customer designated
"quality assurance program" for a specific application. The recommended applications of a product
depend on its quality grade, as indicated below. Customers must check the quality grade of each
application before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically
designed for life support)
Specific: Military systems, aircraft, aerospace equipment, submersible repeaters, nuclear reactor control
systems, life support systems (medical equipment, etc.) and any other equipment
The quality grade of this product is "Standard" unless otherwise specified in this document. If
customers intend to use this product for applications other than those specified for "Standard" quality
grade, they should contact NEC sales representative in advance.
DATA SHEET DOD-PD-0744 (1st edition) 2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
NL128102BC29-01B/01C
CONTENTS
INTRODUCTION ..........................................................................................................................................2
1. OUTLINE....................................................................................................................................................4
1.1 STRUCTURE AND PRINCIPLE...........................................................................................................4
1.2 APPLICATION.......................................................................................................................................4
1.3 FEATURES.............................................................................................................................................4
2. GENERAL SPECIFICATIONS ................................................................................................................5
3. BLOCK DIAGRAM ...................................................................................................................................6
4. DETAILED SPECIFICATIONS ...............................................................................................................7
4.1 MECHANICAL SPECIFICATIONS......................................................................................................7
4.2 ABSOLUTE MAXIMUM RATINGS ....................................................................................................7
4.3 ELECTRICAL CHARACTERISTICS...................................................................................................8
4.3.1 LCD panel signal processing board ...............................................................................................8
4.3.2 Backlight lamp ...............................................................................................................................9
4.3.3 Power supply voltage ripple.........................................................................................................10
4.3.4 Fuse..............................................................................................................................................10
4.4 POWER SUPPLY VOLTAGE SEQUENCE ........................................................................................ 11
4.5 CONNECTIONS AND FUNCTIONS FOR INTERFACE PINS.........................................................12
4.5.1 LCD panel signal processing board .............................................................................................12
4.5.2 Backlight lamp .............................................................................................................................13
4.5.3 Positions of plugs and socket.......................................................................................................15
4.6 SELECTION OF LVDS DATA INPUT MAP ......................................................................................16
4.6.1 Mode A ........................................................................................................................................16
4.6.2 Mode B ........................................................................................................................................17
4.7 DISPLAY COLORS AND INPUT DATA SIGNALS ..........................................................................18
4.8 DISPLAY POSITION ...........................................................................................................................19
4.9 INPUT SIGNAL TIMINGS..................................................................................................................19
4.9.1 Timing characteristics ..................................................................................................................19
4.9.2 Input signal timing chart ..............................................................................................................20
4.10 OPTICS...............................................................................................................................................21
4.10.1 Optical characteristics................................................................................................................21
4.10.2 Definition of contrast ratio.........................................................................................................23
4.10.3 Definition of luminance uniformity ...........................................................................................23
4.10.4 Definition of response times ......................................................................................................23
4.10.5 Definition of viewing angles......................................................................................................23
5. RELIABILITY TESTS.............................................................................................................................24
6. PRECAUTIONS .......................................................................................................................................25
6.1 MEANING OF CAUTION SIGNS ......................................................................................................25
6.2 CAUTIONS ..........................................................................................................................................25
6.3 ATTENTIONS ......................................................................................................................................25
6.3.1 Handling of the product ...............................................................................................................25
6.3.2 Environment.................................................................................................................................26
6.3.3 Characteristics..............................................................................................................................26
6.3.4 Other ............................................................................................................................................26
7. OUTLINE DRAWINGS ...........................................................................................................................27
7.1 FRONT VIEW ......................................................................................................................................27
7.2 REAR VIEW ........................................................................................................................................28
DATA SHEET DOD-PD-0744 (1st edition) 3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
NL128102BC29-01B/01C
1. OUTLINE
1.1 STRUCTURE AND PRINCIPLE
Color LCD module NL128102BC29-01B and NL128102BC29-01C are composed of the amorphous
silicon thin film transistor liquid crystal display (a-Si TFT LCD) panel structure with driver LSIs for
driving the TFT (Thin Film Transistor) array and a backlight.
The a-Si TFT LCD panel structure is injected liquid crystal material into a narrow gap between the TFT
array glass substrate and a monochrome-filter glass substrate.
Color (Red, Green, Blue) data signals from a host system (e.g. PC, signal generator, etc.) are modulated
into best form for active matrix system by a signal processing board, and sent to the driver LSIs which
drive the individual TFT arrays.
The TFT array as an electro-optical switch regulates the amount of transmitted light from the backlight
assembly, when it is controlled by data signals. Color images are created by regulating the amount of
transmitted light through the TFT array of red, green and blue dots.
1.2 APPLICATION
Monitor for PC
1.3 FEATURES
Ultra-wide viewing angle (Adoption of Super Advanced-Super Fine TFT (SA-SFT))
Wide color gamut
High contrast
LVDS interface
Selectable LVDS data input map
Edge light type (without inverter)
Acquisition product for UL60950-1 1st edition/CSA-C22.2 No.60950-1-03 (File number: E170632)
Difference between NL128102BC29-01B and NL128102BC29-01C
Item NL128102BC29-01B NL128102BC29-01C
Luminance 280cd/m2 (typ.) 270cd/m2 (typ.)
White chromaticity Wx, Wy = (0.313, 0.329) (typ.) Wx, Wy = (0.300, 0.315) (typ.)
Cable color of backlight lamps See "4.5.2 Backlight lamp".
DATA SHEET DOD-PD-0744 (1st edition) 4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
NL128102BC29-01B/01C
2. GENERAL SPECIFICATIONS
Display area 376.32 (H) 301.056 (V) mm
Diagonal size of display 48.0 cm (19.0 inches)
Drive system a-Si TFT active matrix
Display color 16,777,216 colors
Pixel 1,280 (H) 1,024 (V) pixels
Pixel arrangement RGB (Red dot, Green dot, Blue dot) vertical stripe
Dot pitch 0.098 (H) 0.294 (V) mm
Pixel pitch 0.294 (H) 0.294 (V) mm
Module size 404.2 (W) 330.0 (H) 22.0 (D) mm (typ.)
Weight 2,900 g (typ.)
Contrast ratio 450:1 (typ.)
At the contrast ratio 10:1
Viewing angle Horizontal: Right side 85 (typ.), Left side 85 (typ.)
Vertical: Up side 85 (typ.), Down side 85 (typ.)
Designed viewing direction Viewing angle with optimum grayscale ( =2.2): normal axis
Polarizer surface Antiglare
Polarizer pencil-hardness 2H (min.) [by JIS K5400]
At LCD panel center
Color gamut
72 % (typ.) [against NTSC color space]
Ton+Toff (10% 90%)
Response time
20 ms (typ.)
At IBL=6.0mArms / lamp
NL128102BC29-01B
280cd/m2 (typ.)
Luminance
At IBL=6.0mArms / lamp
NL128102BC29-01C
270cd/m2 (typ.)
NL128102BC29-01B Wx, Wy = (0.313, 0.329) (typ.)
White chromaticity
NL128102BC29-01C Wx, Wy = (0.300, 0.315) (typ.)
LVDS 2 port
Signal system 8bit digital signals for data of RGB colors, Dot clock (CLK),
Data enable (DE)
Power supply voltage LCD panel signal processing board: 5.0V
Backlight Edge light type: 6 cold cathode fluorescent lamps (without inverter)
At IBL=6.0mArms / lamp and checkered flag pattern
Power consumption
26.8 W (typ., Power dissipation of the inverter is not included.)
DATA SHEET DOD-PD-0744 (1st edition) 5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
NL128102BC29-01B/01C
3. BLOCK DIAGRAM
Host LCD module (Product)
DA0+
DA0- 100
DA1+
100
DA1-
LVDS receiver
DA2+
100 H - driver
DA2-
CKA+
100
CKA- 3,840 lines
DA3+
100 LCD panel
Controller
DA3-
V - driver
DB0+ 1,024 lines
100
DB0-
H: 1,280 3 (R, G, B)
DB1+ V: 1,024
100
DB1-
LVDS receiver
DB2+
100
DB2- Lamp
CKB+
100 Lamp
CKB-
DB3+ Lamp
100
DB3-
TxSEL
Backlight
Fuse (Edge light type)
Power
VDD DC/DC supply
Converter for drivers
GND LCD panel signal processing board
FG
Note1
Note2
VBLH
VBLC
Note1
Note1: Connections between GND (Signal ground), FG (Frame ground) and VBLC (Lamp low voltage
terminal) in the LCD module
GND - FG Connected
GND - VBLC Not connected
FG - VBLC Not connected
Note2: GND and FG must be connected to customer equipment's ground, and it is recommended that GND,
FG and customer inverter ground are connected together in customer equipment.
DATA SHEET DOD-PD-0744 (1st edition) 6
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
NL128102BC29-01B/01C
4. DETAILED SPECIFICATIONS
4.1 MECHANICAL SPECIFICATIONS
Parameter Specification Unit
404.2 0.5 (W) 330.0 0.5 (H) 22.0 0.3 (D)
Module size Note2 mm
Note1
Display area 376.32 (H) 301.056 (V) Note2 mm
Weight 2,900 (typ.), 3,100 (max.) g
Note1: Excluding lamp cable, cable clamp and projections.
Note2: See "7. OUTLINE DRAWINGS".
4.2 ABSOLUTE MAXIMUM RATINGS
Parameter Symbol Rating Unit Remarks
LCD panel signal processing board VDD -0.3 to +6.0 V
Power supply
Ta = 25 C
voltage
Lamp voltage VBLH 2,000 Vrms
Display signals
VD V
Input voltage Note1 Ta = 25 C
-0.3 to +2.8
for signals Function signal VDD= 5.0V
VF V
Note2
Storage temperature Tst -20 to +60 C -
Front surface TopF 0 to +55 C Note3
Operating temperature
Rear surface TopR 0 to +60 C Note4
95 % Ta 40 C
Relative humidity
RH 85 % 40 < Ta 50 C
Note5
70 % 50 < Ta 55 C
Absolute humidity 73
AH g/m3 Ta > 55 C
Note5 Note6
Operating altitude - 4,850 m 0 C Ta 55 C
Storage altitude - 13,600 m -20 C Ta 60 C
Note1: DA0+/-, DA1+/-, DA2+/-, DA3+/-, CKA+/-, DB0+/-, DB1+/-, DB2+/-, DB3+/-, CKB+/-
Note2: TxSEL
Note3: Measured at center of LCD panel surface (including self-heat)
Note4: Measured at center of LCD module's rear shield surface (including self-heat)
Note5: No condensation
Note6: Water amount at Ta = 55