Text preview for : Panel_AUO_B140XW01_V8_CELL_0_[DS].pdf part of . Various Panel AUO B140XW01 V8 CELL 0 [DS] . Various LCD Panels Panel_AUO_B140XW01_V8_CELL_0_[DS].pdf
Back to : Panel_AUO_B140XW01_V8_CEL | Home
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( V ) Final Specifications
Module 14.0"(13.97") HD 16:9 Color TFT-LCD
Model Name B140XW01 V8 Open cell
Note ( )
Customer Date Approved by Date
Jonken Fan 07/31/2012
Checked &
Date Prepared by Date
Approved by
Johnny Tu 07/31/2012
Note: This Specification is subject to change NBBU Marketing Division
without notice. AU Optronics corporation
Contents
B140XW01 V8 Document Version : 1.0 1 of 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
+DQGOLQJ 3UHFDXWLRQV
*HQHUDO 'HVFULSWLRQ
2.1 General Specification ..........................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................6
)XQFWLRQDO %ORFN 'LDJUDP
$EVROXWH 0D[LPXP 5DWLQJV
4.1 Absolute Ratings of TFT LCD Module.............................................................................................11
4.2 Absolute Ratings of Environment .....................................................................................................11
(OHFWULFDO &KDUDFWHULVWLFV
5.1 TFT LCD Module..............................................................................................................................12
6LJQDO ,QWHUIDFH &KDUDFWHULVWLF
6.1 Pixel Format Image ...........................................................................................................................14
6.2 The Input Data Format ......................................................................................................................15
6.3 Integration Interface Requirement.....................................................................................................16
6.4 Interface Timing ................................................................................................................................18
3DQHO 5HOLDELOLW\ 7HVW
7.1 Vibration Test ....................................................................................................................................20
7.2 Shock Test .........................................................................................................................................20
7.3 Reliability Test...................................................................................................................................20
0HFKDQLFDO &KDUDFWHULVWLFV
8.1 LCM Outline Dimension...................................................................................................................21
6KLSSLQJ
9.1 Shipping Label Format ......................................................................................................................22
$SSHQGL[ (',' 'HVFULSWLRQ
B140XW01 V8 Document Version : 1.0 2 of 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page Old description New Description Remark
1.0 2012/07/31 All First Edition for Customer
B140XW01 V8 Document Version : 1.0 3 of 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
10) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
11)Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electrostic breakdown.
B140XW01 V8 Document Version : 1.0 4 of 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2. General Description
B140XW01 V8 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the 16:9
HD, 1366(H) x768(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight
driving circuit. All input signals are LVDS interface compatible.
B140XW01 V8 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items Unit Specifications
Screen Diagonal [mm] 354.95
Active Area [mm] 309.4 X173.95
Pixels H x V 1366x3(RGB) x 768
Pixel Pitch [mm] 0.2265X0.2265
Pixel Format R.G.B. Vertical Stripe
Display Mode Normally White
Response Time [ms] 8 typ / 16 Max
Nominal Input Voltage VDD [Volt] +3.3 typ.
Power Consumption [Watt] 1.0 W
Weight [Grams] 171 g.
Electrical Interface 1 channel LVDS
Thickness [mm] 1 mm Cell / 1.6mm PCBA
Surface Treatment Glare, Hardness 3H,
Support Color 262K colors ( RGB 6-bit )
B140XW01 V8 Document Version : 1.0 5 of 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature) :
Item Symbol Conditions Min. Typ. Max. Unit Note
R Horizontal (Right) 40 45 -
degree
L CR = 10 (Left) 40 45 -
Viewing Angle 1, 5
H Vertical (Upper) 10 20 -
L CR = 10 (Lower) 30 40 -
Cross talk % 4 1, 3
Tr Rising - - -
Response Time Tf Falling - - -
msec 1, 4
TRT Rising + Falling - 8 16
NTSC % - 45 -
B140XW01 V8 Document Version : 1.0 6 of 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Note 1: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change
during measuring. In order to stabilize the luminance, the measurement should be executed after lighting
Backlight for 30 minutes in a stable, windless and dark room, and it should be measured in the center of screen.
! !
Photo detector
Field=2
50 cm
LCD Panel TFT-LCD Module
Center of the screen
Note 2 Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Brightness on the "White" state
Contrast ratio (CR)=
Brightness on the "Black" state
Note 3 Definition of Cross Talk (CT)
CT = | YB