Text preview for : Panel_QDI_QD17VL01_Rev-01_0_[DS].pdf part of . Various Panel QDI QD17VL01 Rev-01 0 [DS] . Various LCD Panels Panel_QDI_QD17VL01_Rev-01_0_[DS].pdf
Back to : Panel_QDI_QD17VL01_Rev-01 | Home
Global LCD Panel Exchange Center www.panelook.com
Prepared by: Date Doc. No. QD17VL01-01
02/06/2004 Doc. Rev. : 01
Issue Date :02/06/2004
Page: 21 pages
( Include cover page,
Quanta Display Inc. drawing)
Preliminary SPECIFICATION
Specification for
TFT LCD Module
Model No. QD17VL01 REV:01
Customer's Approval
Date
Approved
by By
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
These specification sheets are the proprietary product of Quanta Display Inc. ("QDI") and include materials
protected under copyright of QDI. Do not reproduce or cause any third party to reproduce them in any form
or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of QDI.
The device listed in these technical literature sheets was designed and manufactured for use in OA equipment.
In case of using the device for applications such as control and safety equipment for transportation (aircraft,
trains, automobiles, etc.), rescue and security equipment and various safety related equipment which require
higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and
redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace
applications, telecommunication equipment (trunk lines), nuclear power control equipment and medical or
other equipment for life support.
QDI assumes no responsibility for any damage resulting from the use of the device, which does not comply
with the instructions, and the precautions specified in these technical literature sheets.
Contact and consult with a QDI sales representative for any questions about this device.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
Revision History
REV. Date ECN NO. Change Content
1 05/27/2004 N/A Preliminary specification Initiate
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
Content List
Page
1. Application 5
2. Overview 5
3. General Specifications 5
4. Input Terminals 6
5. Absolute Maximum Ratings 8
6. Electrical Characteristics 9
7. Timing Characteristics 15
8. Input Signals, Basic Display Colors and Gray
Scale of Each Color 16
9. Optical Characterics 17
10. Display Quality 20
11. Handling Precautions 20
12. Reliability Test Items 21
13. Others 21
14. Drawing 22
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
1. Application
This specification applies to a color TFT-LCD module, QD17VL01
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film
Transistor). It is composed of a color TFT-LCD panel; driver ICs, control circuit and power supply circuit
and a backlight unit. Graphics and texts can be displayed on a 640 3 480 dots panel with 16.7 million
colors by using the LVDS (Low Voltage Differential Signaling) interface, 8-bit driving method and supplying
+5V DC supply voltage for TFT-LCD panel driving.
The TFT-LCD panel used for this module has very high aperture ratio. A low-reflection and higher-color-
saturation type color filter is also used for this panel. Therefore, high-brightness and high-contrast image,
which is suitable for the LCD TV,HDTV and multimedia use, can be obtained by using this module.
[Features]
1) High aperture panel; high-brightness or low power consumption.
2) Brilliant and high contrast image.
3) 1 Channel LVDS ( 6-bit + FRC ) interface compatible
3. General Specifications
Parameter Specifications Unit
Display size 430.8 (17") Diagonal mm
Active area 344.64 (H) 258.48 (V) mm
Pixel format 640 (H) 480 (V) Pixel
(1 pixel = R+G+B dots)
Pixel pitch 0.1795x3(H) 0.5385(V) mm
Pixel configuration R,G,B vertical stripe
Display mode Normally White
Unit outline dimensions 393(W) 286 (H)u41.8(T) mm
Thickness Max. mm
Weight TBD g
Surface treatment Anti-glare & Hardness:3H
Lamp Quantity Direct 4 U-lamp pcs
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
4. Input Terminals
4-1. TFT-LCD panel driving
CN1 (LVDS signals and +5V DC power supply)
Using connector: DF14-20P-1.25H (Hirose) or Equivalent
Pin No. Symbol Function Remark
1 VDD +5V Input
2 VDD +5V Input
3 GND Power Ground
4 GND Power Ground
5 RxIN0- Receiver signal (-) LVDS
6 RxIN0+ Receiver signal (+) LVDS
7 GND Ground
8 RxIN1- Receiver signal (-) LVDS
9 RxIN1+ Receiver signal (+) LVDS
10 GND Ground
11 RxIN2- Receiver signal (-) LVDS
12 RxIN2+ Receiver signal (+) LVDS
13 GND Ground
14 CLKIN- Clock signal (-) LVDS
15 CLKIN+ Clock signal (+) LVDS
16 GND Ground
17 RxIN3- Receiver signal (-) LVDS
18 RxIN3+ Receiver signal (+) LVDS
19 GND Ground
20 GND Ground
Note 1 All GND(ground) pins should be connected together.
Note 2 All VDD (power supply) pins should be connected together.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
4-2 Interface block diagram
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
4-3. Backlight driving
Connector Type Manufactured
CN1 V High Power Supply for lamp
(High Voltage Side)
CN2 N/A N/A
CN3 V Low Power Supply for lamp
(Low Voltage Side)
Connector Type Manufactured
CN1 S10B-PH-SM3-TB JST
5.Absolute Maximum Ratings
LCD module
Parameter Symbol Condition Ratings Unit Remark
+5V supply voltage VDD Ta=25 -0.3 ~ 6.0
Storage temperature Tstg -20 ~ 60 Note1
Operating temperature (Ambient) Topa 0 ~ +50
Note1 Humidity 90%RH Max. at Ta 40 .
Maximum wet-bulb temperature at 39 or less at Ta>40 .
No condensation.
6. Electrical Characteristics
6-1.TFT-LCD panel driving Ta 25
Parameter Symbol Min. Typ. Max. Unit Remark
VDD Supply voltage VDD 4.5 5.0 5.5 Note2
Current dissipation IDD - 230 300 Note3
Permissive input ripple voltage VRP - - 100 mV p-p VDD=+5V
Differential input High VTH - - 100 100 VCM=+1.2V
threshold voltage Low VTL -100 - - mV Note1
Rush current IRUSH - - 3.0 A Rise time
1mS
Note1 VCM : Common mode voltage of LVDS driver.
Note2
Power On-off sequence
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
90% 90%
Power Supply For LCD 10% 10%
VLCD 0V
T T T T T
10% Valid 10%
Interface Signal
T T
Lamp ON
Power for LAMP
1ms T1 10ms ; 0 T2 50ms ; 200ms T3 ; 200ms T4 ; 0 T5 50ms ; 0 T6 10ms ; 400ms T7
Note3
Typical current condition; 2-line vertical stripe pattern (0,255GS). VDD=+5V
R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B
Maximum current condition; Change to 1x1 dot checkerboard pattern. VDD=+5V
6-2. Backlight driving
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
The backlight system is a direct-lighting type with Direct 4 U-lamp.
The characteristics of the lamp are shown in the following table.
Parameter Symbol Min. Typ. Max. Unit Remark
Lamp current range IL - - mArms Note1
Lamp voltage VL - 1,380 - Vrms
Lamp power consumption PL - 6.5 - Note2 IL=mA
Lamp frequency FL - 42 - kHz Note3
Established starting voltage Vs - - 2,470 Vrms Ta=25
- - 2,660 Vrms Ta=0 Note4
Lamp life time LL 50,000 - - hour Note5
Note1 Lamp current is measured with current meter for high frequency as shown below.
Note2 Calculated Value for reference ( IL V L)
Note3 Lamp frequency may produce interference with horizontal synchronous frequency, and this may
cause beat on the display. Therefore lamp frequency shall be detached as much as possible from
the horizontal synchronous frequency and from the harmonics of horizontal synchronous to avoid
interference.
Note4 The voltage above this value should be applied to the lamp for more than 1 second to start-up.
Otherwise the lamp may not be turned on.
Note5 Lamp life time is defined as the time when either or occurs in the continuous operation
under the condition of Ta = 25 and IL = mArms.
Brightness becomes 50 % of the original value under standard condition.
Kick-off voltage at Ta = 0 exceeds maximum value.
Note6 The performance of the backlight, for example life time or brightness, is much influenced by the
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
characteristics of the DC-AC inverter for the lamp. When you design or order the inverter, please
make sure that a poor lighting caused by the mismatch of the backlight and the inverter (miss-
lighting, flicker, etc.) never occur. When you confirm it, the module should be operated in the same
condition as it is installed in your instrument.
Note7 The lamp wire length is +/- mm(from AL back cover surface to connector, not including connector
length)
6-3 Backlight inverter
6-3-1 Backlight inverter connector and pin assignments
Inverter connector CN1 : S10B-PH-SM3-TB(JST) r Equivalent
Mating connector :PHR-10(JST) or Equivalent
CN1 : Inverter connector pin assignments
Pin No. Symbol Description Remark
1 VDD Power Input +12V
2 VDD Power Input +12V
3 VDD Power Input +12V
4 GND Ground Connected to metal frame
5 GND Ground
6 GND Ground
7 NC Not connection
8 BRTC Backlight On/OFF signal High : On , Low: Off
9 BRTI Luminance by voltage method 3-5V: 100%, 0V: 20%
10 SGND Signal Ground Connected to metal frame
6-3-2. Inverter Electrical Characteristics
Parameter Symbol Min. Typ. Max. Unit Notes
Power Supply VDDB 10.8 12.0 13.2 Vdc
Input Voltage
Power Supply IDDB - (2,500) - mA
Input Current
Power PB - (30) - W
Consumption
7. Timing characteristics of LCD module input signals
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
7-1. Timing characteristics
(This is specified at digital outputs of LVDS driver.)
Item Symbol Min Typ Max Unit Remark
Data Clock Period tCLK 31.7 39.72 - ns
Frequency FCLK - 25.175 31.5 MHZ
Hsync Period tHA - 800 - tCLK
Frequency fH - 31.469 37.5 KHZ
Width tHC 10 96 - tCLK
Vsync Period tVA - 525 - tHA NTSC: 57~63HZ
Frequency fV 47 60 75 HZ PAL: 47~53HZ
Width tVC 2 2 - tHA
DE Horizontal Valid tHE 640 640 640 tCLK
(Data Horizontal Back Porch tHD 8 48 -
Enable) Horizontal Front Porch tHF 16 16 -
Horizontal Blank tHB 34 160 -
Vertical valid tVE 480 480 480 tHA
Vertical Back Porch tVD 2 33 -
Vertical Front Porch tVF 2 10 -
Vertical Blank tVB 6 45 -
Notes : 1.The performance of electro-optical characteristics may be influenced by variance of the vertical
refresh rate.
2. Hsync period will be a double number of character (8).
7-2 Signal Timing Waveform(The time "B" is tHB on horizontal timing and tVB on vertical timing)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Quanta Display Inc
8. Input Signals, Basic Display Colors and Gray Scale of Each Color
Data Signal
Colors &
Gray scale R R R R R4 R5 R6 R7 G G1 G2 G G G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7
0 1 2 3 0 3 4
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Basic Color
Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Gray Scale of Red