Text preview for : HFP0462.PDF part of Sony HFP0462 Sony HiFi Service Bulletin HFP0462.PDF
Back to : HFP0462.PDF | Home
Hi-Fi Products CSA-13
Service Bulletin
Sony Service Company - Technical Services
A Division of Sony Electronics Inc.
Sony Drive, Park Ridge, New Jersey 07656
Model: CDP-CX153 No. 462R1
Subject: Disc Memo Titles Randomly Deleted Date: February 15, 1996
Symptom:
(**) The CDP-CX153 may randomly delete DISC MEMO titles when entered as per the
Operating Instruction manual. The titles may be lost when playing discs or uploading
the data to the CTRL-300 controller.
Solution: Perform the following "Labeling Discs (Disc Memo)" procedure:
1.) With the front cover open, select a Disc to be labeled by turning the JOG
dial until the disc number you wish to assign a Disc Memo appears in the
display.
2.) Press the INPUT Button located on the front panel. to determine the character
type to be entered. Each time you press the the INPUT button the display will
show capital letters (ABC), small letters (abc), and numbers (123) in this order.
See the Operating Instructions for details on correcting spelling mistakes.
3.) Turn the JOG DIAL to access the desired character.
4.) Press the ENTER button to enter the character.
5.) Repeat steps 1-4 until the title is entered (max. 13 characters).
6.) Press the FILE button located on the front panel. "MEMO FILE" will briefly
appear on the front panel display.
THE NEXT TWO STEPS ARE FOR ADDING DISCS TO GROUP FILES. REFER TO THE
OPERATING INSTRUCTIONS MANUAL FOR FURTHER DETAILS ON CREATING OR
LABELING GROUP FILES. IF NEWLY LABELED DISC ARE NOT TO BE ADDED TO
GROUP FILES THEN MOVE ON TO STEP #9.
7.) Press the applicable GROUP 1-8 buttons (if creating a group)
8.) Press GROUP FILE button (if creating a group)
9.) Move the JOG DIAL to the next disc position, repeat steps 1-6.
10.) When you have finished labeling all of the new discs, close the front
cover. The last disc that was labeled will be chucked and TOC read. Rotating
the JOG DIAL, move all of the newly labeled discs, one at a time, into
chucking position and press the ENTER button. This is accomplished by turning
the JOG dial until the disc number which you have assigned a Disc Memo
appears in the display window and the ENTER button is then
Cont.
Reference: FPR- Technical Dept. PRINTED IN USA
PRINTED ON RECYCLED PAPER
Hi-Fi Products Service Bulletin No.462R1
pressed.
Example: If disc locations 40 - 45 have had DISC MEMO labels assigned to
them by using the preceding steps then you must rotate the JOG dial to
bring disc number 40 into the display and then press the ENTER button.
Follow this procedure until all the new discs -41, 42, 43, 44, and 45 have been
entered in this way. This will allow TOC to be read for each new disc.
"MEMO FILE" will appear in the display each time a new disc is loaded and
TOC is read. The new disc titles are now locked into memory.
This unit has enough memory allocation for 200 disc titles of up to 13
characters each to be stored into memory. To view the remaining number of
disc titles that can be stored press the FILE button located on the front panel.