MOI for SATA RSG Tests_252C SATA Interoperability Program Rev. 1.5 - Application Note Agilent_SATA_R part of Agilent MOI for SATA RSG Tests 252C SATA Interoperability Program Rev. 1.5 - Application Note SATA RSG MOI MOI for SATA RSG Tests_252C SATA Interoperability Program Rev. 1.5 - Application Note Agilent_SATA_R, Agilent MOI for SATA RSG Tests_252C SATA Interoperability Program Rev. 1.5 - Application Note Agilent_SATA_RSG_MOI_r1.5_v0.9RC c20130606 [62].pdf text manual preview

Text preview for : MOI for SATA RSG Tests_252C SATA Interoperability Program Rev. 1.5 - Application Note Agilent_SATA_R part of Agilent MOI for SATA RSG Tests 252C SATA Interoperability Program Rev. 1.5 - Application Note SATA RSG MOI Agilent MOI for SATA RSG Tests_252C SATA Interoperability Program Rev. 1.5 - Application Note Agilent_SATA_RSG_MOI_r1.5_v0.9RC c20130606 [62].pdf

Back to : MOI for SATA RSG Tests_25 | Home

Serial ATA
International Organization
Version 0.9RC
06 June 2013

Serial ATA Interoperability Program Revision 1.5
Agilent MOI for SATA RSG Tests

This document is provided "AS IS" and without any warranty of any kind, including, without limitation, any express
or implied warranty of non-infringement, merchantability or fitness for a particular purpose. In no event shall
SATA-IO or any member of SATA-IO be liable for any direct, indirect, special, exemplary, punitive, or
consequential damages, including, without limitation, lost profits, even if advised of the possibility of such
damages.

This material is provided for reference only. The Serial ATA International Organization does not endorse the vendor
equipment outlined in this document.
Serial ATA Logo Working Group

TABLE OF CONTENTS
TABLE OF CONTENTS .........................................................................................2
GROUP 1: RSG REQUIREMENTS ....................................................................10
TEST RSG-01: GEN1 (1.5GB/S) RECEIVER JITTER TOLERANCE TEST (NORMATIVE) ..................11
TEST RSG-02: GEN2 (3.0GB/S) RECEIVER JITTER TOLERANCE TEST (NORMATIVE) ................. 12
TEST RSG-03: GEN3 (6.0GB/S) RECEIVER JITTER TOLERANCE TEST (NORMATIVE) ................. 13
TEST RSG-04: (RESERVED) ....................................................................................................... 14
TEST RSG-05: RECEIVER STRESS TEST AT +350PPM (NORMATIVE) ........................................... 15
TEST RSG-06: RECEIVER STRESS TEST WITH SSC (INFORMATIVE) .......................................... 16
APPENDICES ........................................................................................................17
APPENDIX A