Text preview for : UCC [snap-in] PAG series.pdf part of Chemi-con UCC [snap-in] PAG series . Electronic Components Datasheets Passive components capacitors Chemi-con UCC [snap-in] PAG series.pdf



Back to : UCC [snap-in] PAG series. | Home

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 200 to 450Vdc, Downsized, 105




Downsize, high ripple design ( 10 to 18) PAG
Rated voltage range : 200 to 450Vdc., Capacitance range : 18 to 560 F
Endurance with ripple current : 2,000 hours at 105 Downsized
Higher ripple
Ideal for low profile power supply applications
Non solvent resistant type KMG

RoHS Compliant

SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +105 (200, 400Vdc) -25 to+105 (420, 450Vdc)

Rated Voltage Range 200 to 450Vdc
Capacitance Tolerance 20% (M) (at 20 , 120Hz)
Leakage Current After 1 minute After 5 minutes
CV 1,000 I=0.1CV+40 I=0.03CV+15
CV>1,000 I=0.04CV+100 I=0.02CV+25
Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 )
Dissipation Factor Rated voltage (Vdc) 200V 400V 420V 450V
(tan ) tan (Max.) 0.12 0.15 0.20 0.20 (at 20 , 120Hz)
Low Temperature Rated voltage (Vdc) 200V 400V 420V 450V
Characteristics Z(-25 )/Z(+20 ) 3 5 6 6
(Max. Impedance Ratio)
Z(-40 )/Z(+20 ) 6 6 - - (at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105 .
Capacitance change 20% of the initial value
D.F. (tan ) 200% of the initial specified value
Leakage current The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change 20% of the initial value
D.F. (tan ) 200% of the initial specified value
Leakage current 500% of the initial specified value


DIMENSIONS [mm]
Terminal Code : E
Sleeve (PET : Brown)
F 0.5




F 0.5
d




10 & 12.5 D 10 12.5 14.5 16 18
d 0.6 0.6 0.8 0.8 0.8
D'




F 5.0 5.0 7.5 7.5 7.5
D' D+0.5 max.
Vent L' 15min. 4min. L' L+2.0 max.
( 10) ( 12.5)
Gas escape end seal

Sleeve (PET : Brown)
F 0.5
d




14.5
D'




Vent L' 15min. 4min. ( 14.5 to 18)



PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

E P AG AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 22F:220,100F:101)
Lead forming