SESD009_EDT_Extended_Version_of_NOS_Edit_Aug80.pdf part of cdc SESD009 EDT Extended Version of NOS Edit Aug80 SESD009_EDT_Extended_Version_of_NOS_Edit_Aug80.pdf, . Rare and Ancient Equipment cdc cyber cyber_180 NOS_VE ses SESD009_EDT_Extended_Version_of_NOS_Edit

Text preview for : SESD009_EDT_Extended_Version_of_NOS_Edit_Aug80.pdf part of cdc SESD009 EDT Extended Version of NOS Edit Aug80 . Rare and Ancient Equipment cdc cyber cyber_180 NOS_VE ses SESD009_EDT_Extended_Version_of_NOS_Edit_Aug80.pdf

Back to : SESD009_EDT_Extended_Vers | Home

1-1
EDT - eXTENDED VERSION OF NOS EDIT
06 AUG 80

1.0 INTRODUCTION TO EDT

EDT is an improved version of the standard NOS 1.3 text
editor developed by R. Upton, with thanks to COO division for
ideas and EDT as a starting point.
EDT uses al' EDIT commands as well as many new commands and
extensions to existing commands such as: column searches,
c~lumn manipulations, multIple entries on command lines and on
the EDT control card.
This manual will describe ai' of the commands of EDT and
all of thefr various options.
Please bring any errors, omissions or misunderstandings
reqarding this manual to the author's attention~
2-1
EDT - EXTENDED VERSION OF NOS EDIT
06 AUG 80

2.0 TeXT EDITING CONCEPTS

This section describes the fundamental concepts and terms
associated with the Text Editor as a preparation for the
discussion of the edit session. Included are such subjects as
initiating Text Editor, general command syntax, string
manipulation and column manipulation procedures.

The user Initiates the Text Editor with the EDT command or
control statement. The format is:

or

T~e first format is order dependent; the second is order
independent. The parameters have the following values:
Ifn1 The name of the file to be edited. Default is the
primary file.
Ifn2 Tbe fi'e from which the edit commands are to be
read. For a time-sharing session, default is Input
from the terminal. For a batch job, default is a
record in the Job deck (INPUT file). If Ifn2 = 0
then the edit commands (cmds) are processed and the
editor will end. If .fn2 = 1 then the edit commands
(cmds) are processed and the editor will obtain the
next command from the ftle INPUT.
Itn3 The file on which the output is to be written. For a
time-sharing session, default is the terminal. For a
batch Job. default is the file OUTPUT.
tabs This is the tabset to be used in EDT. See the TAB
command for the valid mnenomics.
2-2
eor - eXTENOED VERSION OF NOS EDIT
06 AUG 80

2.0 TEXT EDITING CONCEPTS
2.1 INITATI~G TEXT EDITOR
~~~~-~-~--~~~~-------~--~----------------------------~~--------~----
cmds This Is a series of EDT commands which will be
executed whenever lf02 is 0 or 1. Otherwise, this is
a com.ent field.

2.1.1 I~TERACTIVE USAGE OF EDT
The time-sharing user frequently uses default