5991-2254EN N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet c20140808 [1 part of Agilent 5991-2254EN N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet c20140808 [1 5991-2254EN N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet c20140808 [1, Agilent 5991-2254EN N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet c20140808 [12].pdf text manual preview

Text preview for : 5991-2254EN N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet c20140808 [1 part of Agilent 5991-2254EN N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet c20140808 [1 Agilent 5991-2254EN N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet c20140808 [12].pdf

Back to : 5991-2254EN N5412D Serial | Home

Keysight Technologies
N5412D Serial Attached SCSI-3 (SAS-3)
Compliance Test Software for Infiniium 90000
and Z-Series Oscilloscopes

Data Sheet
Introduction

N5421A SAS IT/IR Test Verify and debug your SAS primary and secondary transmitter and
receiver differential ports to SMA for
Fixtures for SFF-8482 devices faster and more
connection to Keysight Infiniium Series
SAS-2 x2 Internal Plug/ easily ultra-high-performance oscilloscopes.
Receptacle Interfaces Keysight Technologies, Inc. Serial The N5421A kit also includes the
Attached SCSI-3 (SAS-3) compliance necessary TX and RX transient circuit
Wilder Technologies SAS test loads.
test software for Infiniium Series
IT/IR Test Fixtures for oscilloscopes provides you with a
SFF-8482 SAS-3 x2 Internal fast and easy way to validate and Wilder Technologies (www.wilder-
debug your SAS 1.5, 3.0, 6.0 and tech.com) provides compliance test
Plug/Receptacle Interfaces
12.0 Gbps silicon, host bus adapter, fixtures for SFF-8482, SAS x2 internal
Wilder Technologies Mini- initiator, high-density disk drive or drive/backplane connector interfaces
for SAS 1.5, 3.0, 6.0 and 12.0 Gbps.
SAS HD Test Fixtures for enclosure backplane. It also supports
automated SAS out-of-band (OOB) In addition, the Mini-SAS HD test
SAS-3 Plug/Receptacle fixtures for SAS-3 plug and receptacle
and loop back signal tests with
Interfaces the 81134A pattern generator and interfaces are available from Wilder
N4903B BERT with Option 002. Technologies.
The SAS compliance test software
The SAS-3 electrical test allows you to automatically execute The SAS-3 compliance test software
software simplifies the SAS electrical checklist tests at performs a wide range of tests
validation of SAS designs: each of the IT and CT interface required to meet the physical layer
points and displays the results in a requirements per section 5.9, Tables