Text preview for : Samcon [snap-in] EGS Series.pdf part of Samcon [snap-in] EGS Series . Electronic Components Datasheets Passive components capacitors Samcon Samcon [snap-in] EGS Series.pdf
Back to : Samcon [snap-in] EGS Seri | Home
Samcon LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
EGS SERIES EGH SERIES
EGS Series large size capacitors have "self-standing" terminals and can RoHS
be directly soldered to printed circuit boards without any fixing clamps or compliance
adhesive agents. They are easily fixed to printed circuit boards due to the
specially designed terminals.
SPECIFICATIONS
Series EGS EGH
Category Temperature Range 16V ~ 100V :-40 ~+85 16V ~ 100V :-40 ~+105
160V ~ 450V :-25 ~+85 160V ~ 450V :-25 ~+105
Nominal Cap. Range 82 ~ 33,000F 47 ~ 33,000F
Capacitance Tolerance -20% ~ + 20 % -10 ~ + 30 % 20% ~ + 20 % 20 120Hz
Leakage Current I = 0.02 CV or 3(A) Whichever is smaller. (after 5min)
16 V ~ 100V : Dissipation factor at 20120Hz shall not exceed the values
Dissipation Factor(tan) given in the table of Standard Ratings 160V ~ 450V : 0.15
Low Temp. Impedance W. V . 10 , 16 25 35 50 , 63 80, 100 160 ~ 450
Stability at 120Hz Z( - 25 ) / Z ( + 20 ) 4 3 3 2 2 4
Z( - 40 ) / Z ( + 20 ) 15 10 8 6 5 _
The following specifications shall be satisfied when the capacitors are restored to 20 after the rated
working voltage applied for 2,000 hours at 85 (EGH, at 105)
High Temp. Load Test Capacitance Change ...