Text preview for : Readme for IntuiLink Data Capture for Keysight Oscilloscopes_252C Version 4.30 AgilentDataCapture043 part of Agilent Readme for IntuiLink Data Capture for Keysight Oscilloscopes 252C Version 4.30 DataCapture0430 read Agilent Readme for IntuiLink Data Capture for Keysight Oscilloscopes_252C Version 4.30 AgilentDataCapture0430_readme.txt
Back to : Readme for IntuiLink Data | Home
*************************************************************
Agilent IntuiLink Data Capture Software for Agilent Instruments
Version 4.3.0 4 March, 2013
README.TXT file
Copyright (c) 2000-2013 Agilent Technologies
*************************************************************
*************************************************************
DISCLAIMER. TO THE EXTENT ALLOWED BY LOCAL LAW, THIS AGILENT
SOFTWARE PRODUCT ("SOFTWARE") IS PROVIDED TO YOU "AS IS"
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, WHETHER ORAL
OR WRITTEN, EXPRESS OR IMPLIED. AGILENT SPECIFICALLY
DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT AND
FITNESS FOR A PARTICULAR PURPOSE. Some countries, states and
provinces do not allow exclusions of implied warranties or
conditions, so the above exclusion may not apply to you. You
may have other rights that vary from country to country,
state to state, or province to province. LIMITATION OF
LIABILITY. EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN
NO EVENT WILL AGILENT OR ITS SUBSIDIARIES, AFFILIATES OR
SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST
DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY
TO USE, OR THE RESULTS OF USE OF THE SOFTWARE, WHETHER BASED
IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND
WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Your use of the Software is entirely at your own risk.
Should the Software prove defective, you assume the entire
cost of all service, repair or correction. Some countries,
states and provinces do not allow the exclusion or
limitation of liability for incidental or consequential
damages, so the above limitation may not apply to you. NOTE.
EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY
TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN
ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO
THE LICENSE OF THE SOFTWARE TO YOU.
************************************************************
Agilent IntuiLink Data Capture for Agilent Instruments
offers the following capabilities depending on the
instrument Add-In:
- Alternative to using a plotter to capture the
screen image of GPIB instruments.
- Download bitmap, Plotter image, or Printer
image from an instrument with a screen
- Download waveform data from a scope
- Save instrument settings to a file and
retrieve instrument settings from a file.
(on select instruments)
- Print the screens and images to a printer
with multiple images per page
- GPIB, LAN and USB connections supported.
(on selected instruments)
Installation requirements
--------------------------
Supported Operating System:
* Windows NT 4.0 (with Service Pack 4 or greater, obtain at www.microsoft.com)
* Windows 2000 (with Service Pack 4 or greater, obtain at www.microsoft.com)
* Windows XP
* Windows 7
Connection Setup
-----------------
Agilent IntuiLink Data Capture requires the Agilent I/O Libraries for connections to the instruments.
Connections to the instruments via GPIB, LAN, USB etc needs to be configured first in the I/O Libraries.
For USB connections, Agilent I/O Libraries version M.01.00 or later is required.
Available Instrument Add-Ins
-----------------------------
Add-In file Instrument(s)
-----------------------------
agtdc3577A.dll 3577A
agtdc3585A.dll 3585A
agtdc4145B.dll 4145A/B
agtdc4194A.dll 4194A, gets plotter image or printer image
agtdc4395A.dll 4395A/96B, NOTE: this requires a separate install.
agtdcE4440A.dll E4440A, supports screen capture
agtdc53310.dll 53310A
agtdc54500.dll 54501A, 54502A.........
agtdc54620.dll 54620/40-Series, 54622A/D 54624A/D, 5464x
agtdc54600.dll 54600-Series, 54601A, 54601B, 54603B, 54600B, 54610B, 54610B,
54616B, 54616C, 54602A, 54602B, 54645A, 54645D
agtdc8510C.dll Network Analyzer, 8510A/B/C, 8753D/E, 8720A/B/C, 8752, 8702/3
agtdc8753E.dll 8753C, 8753D, 8753E, 8720ES
agtdc8714E.dll 8712C/ET/ES, 8713C/ET/ES, 8714C/ET/ES
agtdc6000.dll Agilent 6000 Series: MSO6012A,MSO6014A,MSO6032A,MSO6034A,MSO6052A,MSO6054A,MSO6102A,MSO6104A,
DSO6012A,DSO6014A,DSO6032A,DSO6034A,DSO6052A,DSO6054A,DSO6102A,DSO6104A,DSO6014L,DSO6054L,DSO6104L
agtdcinfi.dll Agilent Infiniium series: 54830B,54830D,54831B,54831D,54833A,
54833D,54832B,54832D,54852A,54853A,54854A,54855A,DSO8064A,MSO8064A,DSO8104A,MSO8104A
DSO81304A,DSO80804A,DSO81004A,DSO81204A,DSO80204B,DSO80304B,DSO80404B,DSO80604B,DSO80804B,
DSO81004B,DSO81204B,DSO81304B,DSO90254A,DSO90404A,DSO90604A,DSO90804A,DSO91204A,DSO91304A,
DSO9404A,DSO9254A,DSO9104A,DSO9064A,MSO9404A,MSO9254A,MSO9104A,MSO9064A,
DSOX93204A,DSOX92804A,DSOX92504A,DSOX92004A,DSOX91604A
agtDC5000.dll DSO5012A,DSO5014A,DSO5032A,DSO5034A,DSO5052A,DSO5054A
agtDC7000.dll DSO7032A,DSO7052A,DSO7102A,DSO7034A,DSO7054A,DSO7104A,MSO7032A,MSO7052A,MSO7102A,MSO7034A,MSO7054A,MSO7104A,
MSO7012A,MSO7014A,DSO7012A,DSO7014A,DSO7104B,MSO7104B,DSO7054B,MSO7054B,DSO7052B,MSO7052B,DSO7034B,MSO7034B,
DSO7032B,MSO7032B,DSO7012B,MSO7012B,DSO7014B,MSO7014B
agtDC1000.dll DSO1002A,DSO1004A,DSO1012A,DSO1014A,DSO1022A,DSO1024A,
DSO1052B,DSO1072B,DSO1102B,DSO1152B
agtDC3000.dll DSO-X2012A,DSO-X2022A,DSO-X2002A,DSO-X2014A,DSO-X2024A,DSO-X2004A,
MSO-X2012A,MSO-X2022A,MSO-X2002A,MSO-X2014A,MSO-X2024A,MSO-X2004A,
DSO-X3012A,DSO-X3022A,DSO-X3032A,DSO-X3052A,DSO-X3014A,DSO-X3024A,DSO-X3034A,DSO-X3054A,
MSO-X3012A,MSO-X3022A,MSO-X3032A,MSO-X3052A,MSO-X3014A,MSO-X3024A,MSO-X3034A,MSO-X3054A,
DSO-X3102A,DSO-X3104A,MSO-X3102A,MSO-X3104A
agtDC4000.dll DSO-X4022A,DSO-X4024A,DSO-X4032A,DSO-X4034A,DSO-X4052A,DSO-X4054A,
MSO-X4022A,MSO-X4024A,MSO-X4032A,MSO-X4034A,MSO-X4052A,MSO-X4054A,
DSO-X4104A,DSO-X4154A
MSO-X4104A,MSO-X4154A
Known bugs
~~~~~~~~~~
- Unable to save waveform image as PNG in Windows Vista.
- These add-ins are not compatible with the Scope Data Capture version 1.
- Does not support the ALB export for 1000 series scope data.
Version information on Data Capture
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4.3.0
- Added support for Win 7 for 9000A and 90000A Series.
4.2.0
- Added support to new 4000 series scope.
- Added support to save txt file in scale format. Note, open txt file is valid for raw format only.
- Added support for Win 7 on the following 1000, 2000, 3000, 4000, 5000, 6000 and 7000 series only.
4.1.0
- Added support to new 1000 series scope.
4.0.0
- Add new models for 3000 series.
3.9.0
- Added support to 9000 and 90000X series scope.
3.8.1
- Fix connection problem with DSO7014A scope.
3.8.0
- Added support to the 2000 & 3000 series scope.
3.7.1
- Added Math function support for 1000 series scope
3.7.0
- Added support to new 7000 series scope.
3.6.0
- Added support to the 1000 series scope.
- Added support for save and recall mask data for 5000,6000 and 7000 series scopes.(Required System Software 5.20 and above)
- Added support for new 100MHz 7000-series scopes.
- Fixed bug where Data Capture unable to load .bin file which has more than 16960 points.
3.5.1
- Fixed bug where ALB export size is limited.
3.5.0
- Added support for 90000 series scope.
3.4.0
- Added capabilities to export ALB file.
3.3.0
- Support 7000 series scope
3.2.1
- Fixed bug where Application lose focus after minimized
3.2.0
- Support 5000 series scope
- Enable image to be saved as png format.
3.1.0
- Bug fixes.
3.0.0
- Support 6000 Series scope version 3.0 software
2.1.2
- Added Measurement feature to 6000 Series add-in.
- Added new models support to Infiniium Series add-in.
2.1.1
- Fixed bug on BMP image capture resolution.
- Support new 6000 Series 100MHz scopes.
2.1.0
- Displays multiple channels for Agilent 6000 Series
- Displays individual channel on digital pods.
2.0.9
- Now displays custom characters/symbols such as mu
- Save user pen colors to registry
- Deleted contact name in About Box
2.0.8
- Fixed bug that disabled SaveAs in Japanese OS when using Japanese characters
for file name.
2.0.7
- Changed contact name in about box
2.0.6
- Added ability to delete/add instruments to Instrument Menu (see View menu)
- Added ability to read this file from help menu
2.0.5
- Disabled printer selection of plotter form popup when there is no printer
- modified the toolbar to fix different background color of some buttons
- It is now possible to update a 'duplicate' window with a new trace
2.0.4
Changed refresh bitmap to same icon as Internet Explorer
deleted 'Print...' on the popup for waveform data.
2.0.3 Print preview now works if windows are maximized.
2.0.2 Added copyright notice to about box. Waveform window now has initial title
(was Form1) when the window is maximized.
2.0 released