Text preview for : TK [radial] UTCMZ Series.pdf part of TK [Toshin Kogyo] TK [radial] UTCMZ Series . Electronic Components Datasheets Passive components capacitors TK [Toshin Kogyo] TK [radial] UTCMZ Series.pdf
Back to : TK [radial] UTCMZ Series. | Home
ELECTROLYTIC
ELECTROLYTICCAPACITORS
7mm 7mm Height Low Impedance
JIS C5101 JIS C5101
UTCMZ CE-04
TYPE UTCMZ CE-04
FEATURES
7mmL wide temperature range low impedance
article of product height 7mmL.
/DIAGRAM OF DIMENSIONS
D 6.3 8
F 2.5 3.5
d 0.5 0.5
/ PERFORMANCE SPESIFICATIONS
CATEGORY TEMPERATURE RANGE 55 105
STANDARD CAPACITANCE TOLERANCE 20 20
I=0.01CV or 3A ,WHICHEVER C=RATED CAPACITANCE (F
LEALAGE CURRENT MAX.VALUE
IS THE GREATER (after 2 minutes) V=WORKING VOLTAGEV
W.V 10 50
Tan 0.2 0.11
DISSIPATION FACTOR (MAX.VALUE)
tan When the capasitance exceed 1,000F, the value of tan is
increased by 0.02 for each increment of 1,000F or its fraction.
ENDURANCE CAPACITANCE CHANGE : LESS THAN 25% OF THE INITIAL
APRLCATION OF RATED OPERATING MEASURED VALUE.
VOLTAGE,AT105 FOR 2000Hrs DISSIPATION FACTOR : LESS THAN 200% OF THE INITIAL
SPECIFIED VALUE
LEALAGE CURRENT : LESS THAN THE INITIAL SPESIFIED VALUE.
JIS
THE OTHER CHARACTERISTICS THE OTHER CHARACTERISTICS ARE BASED ON JIS C 5101-4
C5101-4
When the ripple frequency differs from the specification shown in the list of standard products, multiply the value
with the coeffcient below, and use the products under the obtained value.
/FREQUENCY CORRECTION FACTOR
Freq.Hz
Cap.F
120 1K 10K 100K
Multiplier 0.55 0.80 0.90 1.00
/ CASE SIZE TABLE ImpedanceMAX.Value at 20 100kHz
Ripple current MAX. Value mAat 105
mm
W.V Cap D