Text preview for : N5245-90005 Installation Note_252C Add 2nd Source_252C Combiner_252C & Mech Sw Upgr Kit to Upgr N524 part of Agilent N5245-90005 Installation Note 252C Add 2nd Source 252C Combiner 252C & Mech Sw Upgr Kit to Upgr N524 Agilent N5245-90005 Installation Note_252C Add 2nd Source_252C Combiner_252C & Mech Sw Upgr Kit to Upgr N5244A 45A Opt 219 to 224 [14].pdf
Back to : N5245-90005 Installation | Home
Keysight Second Source,
Combiner, and Mechanical
Switches Upgrade Kit
To Upgrade PNA-X N5244A or N5245A Option 219 to
Option 224
For Analyzers with Serial Numbers Prefixed MY/SG/US5150
and Below
Upgrade Kit Order Numbers: N5244AU-922 and
N5245AU-922
Keysight Kit Number: N5245-60102
Installation Note
Installation Note N5245-90005 1
WARRANTY STATEMENT
THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO BEING
CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD
TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KEYSIGHT
SHALL NOT BE LIABLE FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION CONTAINED
HEREIN. SHOULD KEYSIGHT AND THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH WARRANTY
TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE
WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.
DFARS/Restricted Rights Notice
If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is
delivered and licensed as "Commercial computer software" as defined in DFAR 252.227-7014 (June 1995), or as
a "commercial item" as defined in FAR 2.101(a) or as "Restricted computer software" as defined in FAR 52.227-
19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or disclosure of
Software is subject to Keysight Technologies' standard commercial license terms, and non-DOD Departments
and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined in FAR 52.227-
19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as defined in FAR
52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.
Safety Notes
The following safety notes are used throughout this document. Familiarize yourself with each of these notes
and its meaning before performing any of the procedures in this document.
WARNING Warning denotes a hazard. It calls attention to a procedure which, if not correctly performed
or adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until
the indicated conditions are fully understood and met.
CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not correctly performed or
adhered to, could result in damage to or destruction of the instrument. Do not proceed beyond a
caution note until the indicated conditions are fully understood and met.
2 Installation Note N5245-90005
Description of the Upgrade
This upgrade converts your standard 2-port configurable test set analyzer (N5244A Option 219 or N5245A
Option 219) to an N5244A Option 224 or N5245A Option 224 by adding: