Text preview for : 34405A Firmware Revision History Agilent_34405A_Firmware_Revision_History c20140214 [4].pdf part of Agilent 34405A Firmware Revision History 34405A Firmware Revision History c20140214 [4] Agilent 34405A Firmware Revision History Agilent_34405A_Firmware_Revision_History c20140214 [4].pdf
Back to : 34405A Firmware Revision | Home
Date Description Revision History
6/2/2006 34405A firmware update to 1. Solve the firmware download
1.19-3.05 (Changed from V110- issue for a particular batch of
V303) new ATMEL IC.
2. Error 631 on InGuard is
resolved.
6/28/2006 34405A firmware update to 1. Error 635 will pops up if user
1.20-3.05 download only the MB
firmware. Reason is
the OPC code was not sent after
the reset. Solution ---- sent the
OPC code.
2. Once in a while the CAL
checksum is cleared while
performing calibration
(either manual or remote)
Reason is the one public
variable?