5992-0284EN eDP 1.4 Electrical Performance and Characterization Software - Data Sheet c20141118 [22] part of Agilent 5992-0284EN eDP 1.4 Electrical Performance and Characterization Software - Data Sheet c20141118 [22] 5992-0284EN eDP 1.4 Electrical Performance and Characterization Software - Data Sheet c20141118 [22], Agilent 5992-0284EN eDP 1.4 Electrical Performance and Characterization Software - Data Sheet c20141118 [22].pdf text manual preview

Text preview for : 5992-0284EN eDP 1.4 Electrical Performance and Characterization Software - Data Sheet c20141118 [22] part of Agilent 5992-0284EN eDP 1.4 Electrical Performance and Characterization Software - Data Sheet c20141118 [22] Agilent 5992-0284EN eDP 1.4 Electrical Performance and Characterization Software - Data Sheet c20141118 [22].pdf

Back to : 5992-0284EN eDP 1.4 Elect | Home

Keysight Technologies
eDP 1.4 Electrical Performance
and Characterization Software
For Infiniium Series Oscilloscopes

Data Sheet
02 | Keysight | eDP 1.4 Electrical Performance and Characterization Software - Data Sheet

Verify and debug your eDP designs more easily
Keysight Technologies eDP 1.4 electrical performance and characterization software for
Infiniium Series oscilloscopes (see Table 2) provides you with a fast and easy way to ver-
ify and debug your eDP interface designs for embedded systems. The eDP 1.4 electrical
test software is designed to be uniquely flexible to handle the wide variety of configu-
rations that are possible in embedded systems and pose characterization challenges. It
offers the standard tests that are recommended as well as other informative tests, so
it functions equally well as a validation tool. It displays the measurement data results in
a flexible report format, and the report also provides a margin analysis that shows how
closely your device passed or failed each test.

To make measurements with the eDP 1.4 electrical performance and characterization
(EP&C) software, you will also need an eDP TPA fixture for high-speed signal access as
well as for AUX channel and other lines of the interface. Available fixtures are identified
in Table 5.

The eDP 1.4 EP&C software is based broadly on the widely-industry-accepted Keysight
DisplayPort application, which extends utility to include a wizard graphic user inter-
face that enables test selection, parameter election, test specification entry, and test
template sharing. These features are unique in the industry and are supported to enable
ecosystem sharing of test process specifics for highly variant embedded designs.

There is no official interoperability program for eDP 1.4, though this software goes a long
way to create a defacto program