Text preview for : Panel_AUO_A201SN02_V0_0_[DS].pdf part of . Various Panel AUO A201SN02 V0 0 [DS] . Various LCD Panels Panel_AUO_A201SN02_V0_0_[DS].pdf
Back to : Panel_AUO_A201SN02_V0_0_[ | Home
Global LCD Panel Exchange Center www.panelook.com
Specifications Approval Sheet
Product Description: 20.1" COLOR TFT-LCD TV MODULE
AU Model Name: A201SN02 V0
Customer Part No:
Customer Signature Date AU 2005/02/15
Approved By:
Reviewed By:
Prepared By:
Please return one copy with your signature and comments for our
confirmation.
AU Optronics Corporation
Tel: +886-3-563-2899
Fax: +886-3-563-1590
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V 0.01
* No Reproduction and Redistribution Allowed
Spec. No. TVPM
A201SN02 V0
Version : 0.01
Date : 06/25/2004
Product Specification
20.1 COLOR TFT-LCD MODULE
MODEL NAME: A201SN02 V.0
< > Preliminary Specification
< > Final Specification
2/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V 0.01
Record of Revision
Version Revise Date Old Description(A201SN01 V5) New Description(A201SN02 V0) Remark
1 25/Jun/2004 1. Produced in G4 Fab. 1. Produced in G5 Fab.
2. LC Process: Injection 2. LC Process: ODF Process
3/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
Contents:
A. Physical specifications
B. Electrical specifications
1. Pin assignment .
2.Absolute maximum ratings
3. Electrical characteristics
a. Typical operating conditions.
b. Display color v. s. input data signals
c. Input signal timing
d. Display position
e. Backlight unit
C. Optical specifications
D. Reliability test items
E. Display quality
F. Handling precaution
G. Packing
Appendix:
Fig.1 LCM outline dimensions
Fig.2 Timing chart
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
4/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
A. Physical specifications
NO. Item Specification Remark
1 Display resolution(pixel) 800x3(H) 600(V)
2 Display Mode TN Type, Normally White + SWV Film
3 Active area (mm) 408(H) 306(V)
4 Screen size (inch) 20.1(Diagonal)
5 Pixel pitch (mm) 0.51(H) 0.51(V)
6 Color configuration R. G. B. Vertical stripe
7 Display Color 16.7M (8 bit)
8 Typical white Luminance 500 nit (typ.)
9 Color Gamut 75% typ. of NTSC coverage
10 Response Time 16ms typ. (Tr+Tf)
11 Electrical Interface TTL 1 port
12 Overall dimension (mm) 448(W) 347(H) 23(D)(max.) Note 1
13 Weight (g) 3500
14 Surface Treatment Hard Coating + AR
Note 1: Refer to Fig. 1.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
5/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
B. Electrical specifications
1.Pin assignment
P/N Symbol Function P/N Symbol Function
1 NC 26 R0 Red Data
2 NC 27 GND Ground
3 NC 28 G7
4 GND Ground 29 G6
Green Data
5 GND Ground 30 G5
6 VCC 31 G4
7 VCC 32 GND Ground
Power Input (+5.0V)
8 VCC 33 G3
9 VCC 34 G2
Green Data
10 GND 35 G1
11 HSYNC Horizontal Sync. Active 36 G0
12 VSYNC Vertical Sync. Low 37 GND Ground
13 GND 38 B7
14 DE Data Enable 39 B6
Blue Data
15 GND 40 B5
16 DCLK Dot Clock 41 B4
17 GND Ground 42 GND Ground
18 R7 43 B3
19 R6 44 B2
Red Data (R7 :MSB) Blue Data
20 R5 45 B1
21 R4 46 B0
22 GND Ground 47 GND Ground
23 R3 48 GND Ground
24 R2 Red Data 49 NC
25 R1 50 NC
CN1 (50P) connector: Compatible with P-Two AF7501-N2G1Z
2. Absolute maximum ratings (GND = 0 V)
Values Unit
Parameter Symbol Remark
Min. Max.
Power voltage V CC -0.3 5.5 V DC At 25
Input signal voltage V LH -0.3 VCC+0.3 VDC At 25
Operating temperature Top 0 +50 Note 1
Storage temperature T ST -20 +70 Note 1
Note 1: The relative humidity must not exceed 90% non-condensing at temperatures of 40 or
less. At temperatures greater than 40 , the wet bulb temperature must not exceed
39 . When operate at low temperatures, the brightness of CCFL will drop and the
lifetime of CCFL will be reduced.
Note 2: The unit should not be exposed to corrosive chemicals.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
6/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
3. Electrical characteristics
a. Typical operating conditions
Item Symbol Min. Typ. Max. Unit Remark
Input voltage V CC 4.75 5.0 5.25 V
Power
supply Current
IA - 0.8 1.0 Arms Note 1
voltage consumption
Inrush current I RUSH - - 1.5 Apeak Note 2
Internal Low voltage VIL 0 - 1.0 V
logic
High voltage VIH 2.3 - 3.3 V
Power ripple voltage VRP - - 100 mVp-p
Note 1:Effective value (mArms) at VCC = 5 V/25 .
Note 2: Refer to the following power-on condition.
90%
Vcc
10%
Ton=470 s 10%
Sequence of Power-on/off and signal-on/off
T3 T4 0ms T1 70msec
Power 0ms T2 70msec
T1 T2
300msec T3
T5
300msec T4
Input signal T5 10msec
Apply the lamp voltage within the LCD operating range. When the backlight turns on before
the LCD operation or the LCD turns off before the backlight turns off, the display may
momentarily become abnormal.
Caution
The above on/off sequence should be applied to avoid abnormal function in the display.
In case of handling:
Make sure to turn off the power when you plug the cable into the input connector or pull the
cable out of the connector.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
7/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
b. Display color v.s. input data signals
Data signal (0 : Low level, 1: High level)
Display colors
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Basic
Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
colors
Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Dark 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red
grayscale
bright
1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
Green
grayscale
bright
0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Blue
grayscale
bright
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Note: Each basic color can be displayed in256 gray scales using the 8 bit data signals. By
combining the 24-bit data signals(R, G, B), the 16777216 colors can be achieved on the display.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
8/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
c. Input signal timing
Timing diagrams of input signal are shown in Fig 2.
(1). Timing characteristics of input signals
DE mode
Item Symbol Min. Typ. Max. Unit Remark
Clock frequency Fck 38 40 50 MHz
Horizontal blanking Thb1 235 256 500 Clk
Horizontal display period Thd - 800 - Clk
Horizontal sync. period Th 1035 1056 1300 Clk
Vertical frequency - 46 60 76 Hz
Vertical blanking Tvb1 10 28 150 Th
Vertical display width Tvd - 600 - Th
Vertical sync. period Tv 610 628 750 Th
H/V mode
Item Symbol Min. Typ. Max. Unit Remark
Clock frequency Fck 38 40 50 MHz
Horizontal display period Thd 1030 1056 1300 Clk
Hsync pulse width Thw 5 128 - Clk
Hsync front porch Thf 10 40 - Clk
Hsync back porch Thb 8 88 - Clk
Hsync width+back porch Thw+Thb 80 - Thd-810 Clk
Hsync blanking Thb1 230 256 500- Clk
Vsync period Tv 610 628 650 Th
Vsync width Tvw 2 4 - Th
Vsync front porch Tvf 0 1 - Th
Vsync blanking Tvb1 10 28 50 Th
Hsync/Vsync phase shift Tvpd 2 320 - Clk
Item Symbol Value Unit Description
After falling edge of Hsync, counting 218
Horizontal display start The 218 Clk clk, then getting valid data from 219th clk 's
data.
After falling edge of Vsync, counting 25 Th,
Vertical display start Tve 25 Th
then getting 26th Th's data.
Note 1:Clock falling edge latch the data.
Note 2:H/V is negative polarity.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
9/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
d. Display position
D( 1,1 ) D( 2,1 ) ...... D( X,1 ) ...... D( 799,1 ) D( 800,1 )
D( 1,2 ) D( 2,2 ) ...... D( X,2 ) ...... D( 799,2 ) D( 800,2 )
. . . .
.
. ...... .
. ...... .
. .
.
D( 1,Y ) D( 2,Y ) ...... D( X,Y ) ...... D( 799,Y ) D( 800,Y )
. . . .
.
. ...... .
. ...... .
. .
.
D( 1,599 ) D( 2,599 ) ...... D( X,599 ) ...... D( 799,599) D( 800,599 )
D( 1,600 ) D( 2,600 ) ...... D( X,600 ) ...... D( 799,600) D( 800,600)
e.Backlight unit
The backlight system is an edge-lighting type with a CCFT(Cold Cathode Fluorescent Tube).
The characteristics of a single lamp are shown in the following tables.
Parameter Symbol Min. Typ. Max. Unit Remark
Lamp voltage VL 720 800 880 Vrms Note 1
Lamp current IL 4 5.5 7 mArms Note 1
Power consumption PL - 4.4x6 - W Note 2
- - 1500(T=0 )
Lamp starting voltage VS Vrms Note 3
- - 1150(T=25 )
Frequency FL 40 52 60 KH Z Note 4
Lamp life time LL 50000 - - Hr Note 1, 5
Note 1: T= 25
Note 2: Inverter should be designed with the characteristic of lamp. When you are designing
the inverter, the output voltage of the inverter should comply with the following
conditions.
(1). The area under the positive and negative cycles of the waveform of the lamp
current and lamp voltage should be area symmetric (the symmetric ratio should
be larger than 90%).
(2). There should not be any spikes in the waveform.
(3). The waveform should be sine wave as possible.
(4). Lamp current should not exceed the maximum value within the operating
temperature (It is prohibited to over the maximum lamp current even if operated
in the non-guaranteed temperature). When lamp current over the maximum
value for a long time, it may cause fire. Therefore, it is recommend that the
inverter should have the current limited circuit.
Note 3: The inverter open voltage should be designed larger than the lamp starting voltage at
T=0oC, otherwise backlight may be blinking for a moment after turning on or not be
able to turn on. The open voltage should be measured after ballast capacitor. If an
inverter has shutdown function it should keep its open voltage for longer than 1
second even if lamp connector is open.
Note 4: Lamp frequency may produce interference with horizontal synchronous frequency
and this may cause line flow on the display. Therefore lamp frequency shall be
detached from the horizontal synchronous frequency and its harmonics as far as
possible in order to avoid interference.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
10/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
Note 5: Brightness (IL= 6mA) to be decrease to the 50% of the initial value.
Note 6: CN2 connector (backlight): BHSR-02VS-1 (JST)
Mating connector: SM02B-BHS-1-TB (JST)
Pin no. Symbol Function Remark
1 H CCFL power supply (H.V.) Cable color: Pink (central); Dark Gray others)
2 L CCFL power supply (GND) Cable color: White
C. Optical specifications ( Note 1, Note 2 )
Specification
Item Symbol Condition Unit Remark
Min. Typ. Max.
Response time
Rising time Tr =0 - 5 10 ms Note 4
Falling time Tf - 11 15
Contrast ratio(center of screen) CR =0 400 500 - Note 3,5
Viewing angle
Top 50 60 -
Bottom CR 10 55 60 - Deg. Note 3,5,7
Left 55 80 -
Right 65 80 -
Brightness (center of screen) YL =0 400 500 - nit Note 3,6
Wx 0.254 0.284 0.314 Note 3
Color chromaticity (CIE) =0
Wy 0.263 0.293 0.323
Rx 0.619 0.649 0.679
Ry 0.304 0.334 0.364
Gx 0.257 0.287 0.317
Gy 0.574 0.604 0.634
Bx 0.105 0.135 0.165
By 0.037 0.067 0.097
Color Saturation (NTSC) 75 %
White uniformity W 70 - - % Note 3,8
Note 1: Ambient temperature = 25 .
Note 2: To be measured in dark room after backlight warm up 30 minutes.
Note 3: To be measured with a viewing cone of 1 by Topcon luminance meter ELDIM EZContrast
160D.
Note 4: Definition of response time:
The output signals of BM-7 are measured when the input signals are changed from
"Black" to "White" (falling time) and from "White" to "Black" (rising time), respectively.
The response time interval between the 10% and 90% of amplitudes. Refer to figure as
below.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
11/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
"Black"
"White" "White"
100%
Signal(Relative value)
90%
10%
0%
Tr Tf
Note 5. Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Brightness on the "white" state
Contrast ratio (CR)=
Brightness on the "black" state
Note 6: Driving conditions for CCFL: IL= 5.5 mA, 52KHz Frequency.
Note 7: Definition of viewing angle:
Note 8: Definition of white uniformity:
White uniformity is calculated with the following formula.
Luminance are measured at the following thirteen points (1~13).
Minimum Brightness of 13 points
W=
Maximum Brightness of 13 points
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
12/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
D. Reliability test items (Note 1)
Test tem Test Condition Remark
High temperature storage 60 , 240Hrs Note 1, 2, 3
Low temperature storage -20 , 240Hrs Note 1, 2, 3
High temperature & high 40 , 90%RH, 240Hrs
Note 1, 2, 3
humidity operation (No condensation)
High temperature operation 50 , 240Hrs Note 1, 2, 3
Low temperature operation 0 , 240Hrs Note 1, 2, 3
Temperature cycling -20 ~60
Note 1, 2, 3
(non-operation) 1H, 10mins, 1H, 5cycles
Electrostatic discharge 150 pF,150
,10kV,1 second, 9 position on the
Note 3
(non-operation) panel, 10 times each place
Vibration Sweep:1G, 10H Z ~ 500H Z ~ 10HZ /2.5min
Note 1, 2, 3
(non-operation) 2 hours for each direction X, Y, Z (6 Hrs in total)
Mechanical shock 50G/11ms, 200G/2ms, X, Y, Z
Note 1, 2, 3
(non-operation) once for each direction
Note 1: Evaluation should be tested after storage at room temperature for one hour.
Note 2: There should be no change which might affect the practical display function when the
display quality test is conducted under normal operating condition.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
13/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
Note 3: Judgment: 1.Function OK.
2.No serious image quality degradation.
E. Display quality
The display quality of the color TFT-LCD module should be in compliance with the
AUO's OQC inspection standard.
F. Handling precaution
The Handling of the TFT-LCD should be in compliance with the AUO's handling principle
standard.
G. Packing:
1pcs Module/ESD 1pcs Module
Bag
4pcs Modules
Cushion top
Cushion down Cushion set
H Tape
4pcs / 1 carton
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
14/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
Fig.1 LCM outline dimension
AF750L-N2G1Z
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
15/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
A201SN02 V.0.01 Spec. No. TVPM-A201SN02 V0
(1 pixel / clock)
invalid
Invalid
799,Y 800,Y
X,599 X,600
Tvd
Thd
Fig.2 Timing chart
X,3
X,2
X,1
3,Y
Tv
Tv
Th
2,Y
1,Y
Tvbl
Invalid
Thbl
invalid
Fck
X,599 X,600
800,Y
RGB
RGB
CLK
DE
DE
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
16/16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com