Text preview for : E8364-90038 Service Guide_252C E8362C_252C E8363C_252C & E8364C PNA Series Microwave Network Analyze part of Agilent E8364-90038 Service Guide 252C E8362C 252C E8363C 252C & E8364C PNA Series Microwave Network Analyze Agilent E8364-90038 Service Guide_252C E8362C_252C E8363C_252C & E8364C PNA Series Microwave Network Analyzer c20140115 [200].pdf
Back to : E8364-90038 Service Guide | Home
Service Guide
E8362C, E8363C, E8364C
Agilent Technologies
PNA Series
Microwave Network Analyzers
Part Number E8364-90038
Printed in USA
January 15, 2014
Supersedes: August 20, 2013
Agilent Technologies, Inc. 2008-2009, 2011-2014
WARRANTY STATEMENT
THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO BEING
CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, AGILENT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH
REGARD TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
AGILENT SHALL NOT BE LIABLE FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY
INFORMATION CONTAINED HEREIN. SHOULD AGILENT AND THE USER HAVE A SEPARATE WRITTEN
AGREEMENT WITH WARRANTY TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT
WITH THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.
DFARS/Restricted Rights Notice
If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is
delivered and licensed as "Commercial computer software" as defined in DFAR 252.227-7014 (June 1995),
or as a "commercial item" as defined in FAR 2.101(a) or as "Restricted computer software" as defined in
FAR 52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or
disclosure of Software is subject to Agilent Technologies' standard commercial license terms, and non-DOD
Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined
in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as
defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any
technical data.
Certification
Agilent Technologies, Inc. certifies that this product met its published specifications at the time of shipment
from the factory. Agilent Technologies, Inc. further certifies that its calibration measurements are traceable
to the United States National Institute of Standards and Technology, to the extent allowed by the Institute's
calibration facility, and to the calibration facilities of other International Standards Organization members.
ii Service Guide E8364-90038
Assistance
Product maintenance agreements and other customer assistance agreements are available for Agilent
Technologies, Inc. products. For information about these agreements and for other assistance, contact
Agilent. Refer to "Contacting Agilent" on page 2-12.
Safety and Regulatory Information
The safety and regulatory information pertaining to this product is located in Chapter 1, "Safety and
Regulatory Information."
Safety Notes
The following safety notes are used throughout this manual. Familiarize yourself with each of the notes and
its meaning before operating this instrument. All pertinent safety notes for using this product are located in
Chapter 1, "Safety and Regulatory Information."
WARNING Warning denotes a hazard. It calls attention to a procedure which, if not correctly
performed or adhered to, could result in injury or loss of life. Do not proceed beyond a
warning note until the indicated conditions are fully understood and met.
CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not correctly performed or
adhered to, could result in damage to or destruction of the instrument. Do not proceed
beyond a caution sign until the indicated conditions are fully understood and met.
Service Guide E8364-90038 iii
Documentation Map
The online Help files are embedded in the analyzer, offering quick reference to
programming and user documentation. From the Help drop-down menu, you can
access the Help system in five different languages. Also, you can view the Analyzer
Product Overview multimedia presentation and access the analyzer's Web page.
The Installation and Quick Start Guide helps you to quickly familiarize yourself with
the analyzer. Procedures are provided for installing, configuring, and verifying the
operation of the analyzer.
Printing Copies of Documentation from the Web
To print copies of documentation from the Web, download the PDF file from the Agilent web site: