Text preview for : Panel_LG_Display_LM290WW1-SSA1_1_[DS].pdf part of . Various Panel LG Display LM290WW1-SSA1 1 [DS] . Various LCD Panels Panel_LG_Display_LM290WW1-SSA1_1_[DS].pdf
Back to : Panel_LG_Display_LM290WW1 | Home
Global LCD Panel Exchange Center www.panelook.com
LM290WW1
Liquid Crystal Display
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ) Final Specification
Title 29" Wide Full HD TFT LCD
BUYER General SUPPLIER LG Display Co., Ltd.
MODEL *MODEL LM290WW1
SUFFIX SSA1
*When you obtain standard approval,
please use the above model name without suffix
SIGNATURE SIGNATURE
APPROVED BY APPROVED BY
DATE DATE
/ B. C. Kim / G. Manager
REVIEWED BY
J. G. Lee / Manager [C]
/ G. N. Jin / Manager [M]
M. S. Kang / Manager [P]
PREPARED BY
/
S. K. Park / Engineer
Please return 1 copy for your confirmation with
MNT Products Engineering Dept.
your signature and comments. LG Display Co., Ltd
Ver. 0.3 JULY. 30. 2012 1 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM290WW1
Liquid Crystal Display
Product Specification
Contents
No ITEM Page
COVER 1
CONTENTS 2
RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTREISTICS 6
3-2 INTERFACE CONNECTIONS 9
3-3 LVDS CHARACTERISTICS 13
3-4 SIGNAL TIMING SPECIFICATIONS 18
3-5 SIGNAL TIMING WAVEFORMS 19
3-6 COLOR DATA REFERNECE 20
3-7 POWER SEQUENCE 21
4 OPTICAL SFECIFICATIONS 23
5 MECHANICAL CHARACTERISTICS 29
6 RELIABLITY 32
7 INTERNATIONAL STANDARDS 33
7-1 SAFETY 33
7-2 EMC 33
7-3 ENVIRONMENT 33
8 PACKING 34
8-1 DESIGNATION OF LOT MARK 34
8-2 PACKING FORM 34
9 PRECAUTIONS 35
Ver. 0.3 JULY. 30. 2012 2 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM290WW1
Liquid Crystal Display
Product Specification
RECORD OF REVISIONS
Revision
Revision Date Page Description
No
0.0 May. 17. 2012 - First Draft, Preliminary Specifications
0.1 Jun. 11. 2012 30, 31 Updated the mechanic drawing of LCM
Updated the outline dimension (H) : 694.4mm 693.6mm
0.2 July. 19. 2012 4, 29 Updated the weight (Typ) : 3,450g 3,395g
(Max) : 3,620g 3,565g
Updated the power consumption (Logic) : 5.53W 6.0W
4, 6 (Total) : 31.23W 31.7W
23 Updated the Color Coordinates
30, 31 Updated the mechanic drawing of LCM
12 Updated the text of LED interface connector : "wire-locking type"
35 Updated the text of 9-2 (3) : "lower" "higher"
Updated the Optical Measurement Equipment : PR880 or RD80S or
23 PR650
0.3 July. 30. 2012 14 Add the SSC Spec
Ver. 0.3 JULY. 30. 2012 3 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM290WW1
Liquid Crystal Display
Product Specification
1. General Description
LM290WW1 is a Color Active Matrix Liquid Crystal Display Light Emitting Diode ( White LED) backlight
system without LED driver. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 29-inch diagonally measured
active display area with Wide Full HD resolution (1080 vertical by 2560 horizontal pixel array). Each pixel is
divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the
brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, presenting a
palette of more than 16,7M(True) colors. It has been designed to apply the 8Bit 4 port LVDS interface. It is
intended to support applications where thin thickness, wide viewing angle, low power are critical factors and
graphic displays are important. It is intended to support displays where high brightness, super wide viewing
angle, high color saturation, and high color are important.
FIG. 1 Block diagram
RGB
LVDS LVDS 3,4
Source Driver Circuit
2Port CN2
(41pin) Timing Control Block
LVDS 1,2 S1 S2560
G1
LVDS CN1
2Port (51pin)
TFT - LCD Panel
(2560 RGB 1080 pixels)
VLCD
Power Circuit Block
(+12V)
G1080
VLED Backlight Assembly (LED)
CN3 (6Pin)
General Features
Active Screen Size 29 inches (73.025cm) diagonal (Aspect ratio 21:9)
Outline Dimension 693.6(H) x 308.9(V) x 17(D, Top : 11.0) mm (Typ.)
Pixel Pitch 0.0876(H) mm x RGB x 0.2628(V) mm
Pixel Format 2560 horizontal x 1080 vertical Pixels, RGB stripe arrangement
Color Depth 8-bit, 16,777,216 colors
Luminance, White 300 cd/m2 (Center, 1 point)
Viewing Angle (CR>10) View Angle Free (R/L 178(Typ.), U/D 178(Typ.))
Power Consumption Total (31.7)W (Typ.) ((6.0 W) @VLCD, 25.7 W @ 300 cd/m2)
Weight 3,395 g (Typ.)
Display Operating Mode Transmissive mode, Normally Black
Surface Treatment Hard coating (3H) & Anti-Glare treatment of the front polarizer
Ver. 0.3 JULY. 30. 2012 4 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM290WW1
Liquid Crystal Display
Product Specification
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Table 1. Absolute maximum ratings
Values
Parameter Symbol Units Notes
Min Max
Power Supply Input Voltage VLCD -0.3 +13.0 Vdc At 25
Operating Temperature TOP 0 50 C
Storage Temperature TST -20 60 C
1,2,3
Operating Ambient Humidity HOP 10 90 %RH
Storage Humidity HST 10 90 %RH
LCM Surface Temperature
Tsurface 0 65 1, 4
(Operation)
Note : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 C Max, and no condensation of water.
2. Maximum Storage Humidity is up to 40 , 70% RH only for 4 corner light leakage Mura.
3. Storage condition is guaranteed under packing condition.
4. LCM Surface Temperature should be Min. 0 and Max. 65 under the VLCD=12.0V,
fV=60Hz, 25 ambient Temp. no humidity control and LED string current is typical value.
FIG. 2 Temperature and relative humidity
90%
60
60%
Humidity [(%)RH]
50 Storage
Wet Bulb
Temperature [ ]
40
40%
Operation
30
20
10
0
10%
-20 0 10 20 30 40 50 60 70 80
Dry Bulb Temperature [ ]
Ver. 0.3 JULY. 30. 2012 5 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM290WW1
Liquid Crystal Display
Product Specification
3. Electrical Specifications
3-1. Electrical Characteristics
It requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array
and liquid crystal. The other input power for the LED/Backlight is typically generated by a LED Driver. The
LED Driver. is an external unit to the LCDs.
Table 2. Electrical Characteristics (Module)
Values
Parameter Symbol Unit Notes
Min Typ Max
MODULE :
Power Supply Input Voltage VLCD 11.4 12 12.6 Vdc
Permissive Power Input Ripple VLCD - - 0.3 V 1
(375) (500) (625) 2
Power Supply Input Current ILCD
- (640) (800) 3
Power Consumption PLCD - (6.0) (7.5) Watt 2
Inrush current IRUSH - - (3) A 4
Note :
1. Permissive power ripple should be measured under VLCD =12.0V, 25 C, fV(frame frequency)=MAX
condition and At that time, we recommend the bandwidth configuration of oscilloscope is to be under
20MHz. See the next page.
2. The specified current and power consumption are under the VLCD=12.0V, 25 2 C, fV=60Hz condition
whereas Typical Power Pattern [Mosaic] shown in the [ Figure 3 ] is displayed.
3. The current is specified at the maximum current pattern of [Figure 3].
4. Maximum Condition of Inrush current :
The duration of rush current is about 5ms and rising time of power Input is 500us r 20%.(min.).
Ver. 0.3 JULY. 30. 2012 6 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM290WW1
Liquid Crystal Display
Product Specification