Text preview for : Operation Instruction & Installation.pdf part of Samsung Operation Instruction & Installation Samsung LCD TV LE46S86 LE26-32-37-40-46S81-s86bd_bx_ch_gja26-32-37-40-46seu Operation Instruction & Installation.pdf
Back to : Operation Instruction & I | Home
10 Operating Instructions and Installation
10 Operating Instructions and Installation
10-1 Front
- The product colour and shape may vary depending on the model.
1. SOURCE 4. C/P.
Toggles between all the available input sources Press to change channels.
(TV, Ext.1, Ext.2, AV, S-Video, Component, PC, In the on-screen menu, use the C/P. buttons
HDMI1, HDMI2). as you use the and buttons on the remote control.
In the on-screen menu, use this button as you use the (Without the Remote Control, you can turn on the TV
ENTER button on the remote control. by using the Channel buttons.)
2. MENU 5. Speakers
Press to see an on-screen menu of your TV's features.
In case of DTV mode, the DTV menu appears. 6. (Power)
Press to turn the TV on and off.
3. Power Indicator
Press to decrease or increase the volume. and turns off when the power is on and lights up
In the on-screen menu, use the buttons as in stand-by mode. Remote Control Sensor Aim the
you use the and buttons on the remote control. remote control towards this spot on the TV.
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
10-1
10 Operating Instructions and Installation
10-2 Connection Panel
- Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
- When connecting an external device, match the colour of the connection terminal to the cable.
1. Connecting Set-Top Box, VCR or DVD
Connector Input Output
Video Audio (L/R) RGB Video + Audio (L/R)
EXT 1 Only TV or DTV output is available.
EXT 2 Output you can choose.
- Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
10-2
10 Operating Instructions and Installation
2. Connecting AUDIO
Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theater.
3. HDMI IN 1, HDMI IN 2
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players).
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- "High Definition Multimedia interface" allows the transmission of high definition digital video data and
multiple channels of digital audio ( 5.1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the
HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel
digital audio.
DVI IN (HDMI IN 2) / (AUDIO R/L)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure
that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may
result in picture distortion, image breakup or no picture.
- When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 IN terminal.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the "R- AUDIO - L"
terminal on DVI for sound output.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i
HDMI/DVI 50Hz X X X O O O
HDMI/DVI 60Hz X O X X O O
Component O O O O O O
4. Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
6. Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio
out connectors on the A/V device.
- Headphone may be connected to the headphone output ( 5 ) on the rear of your set. While the headphone is
connected, the sound from the built-in speakers will be disabled.
7. Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of
your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio
Out" of the sound card on your computer.
8. SERVICE
- Service connection for qualified service engineer.
9. Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and
the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV
(or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y
or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1 080i mode.
10. Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
10-3
10 Operating Instructions and Installation
10-3 Remote Control
1. Television Standby button
2. Number buttons for direct channel access
3. One/Two-digit channel selection
4. Selects the TV mode directly
5. Used to display Channel Lists on the screen.
6. Volume increase
Volume decrease
7. Temporary sound switch-off
8. Menu display and change confirmation
9. Sound mode selection
10. Returns to the previous menu.
11. Picture effect selection
12. Adjusts screen brightness to save energy.
13. Sound effect selection
14. SRS TSXT selection
15. Available source selection
16. Previous channel
17. Selects the HDMI mode directly.
18. omatic Power-off
19. P : Next channel
P : Previous channel
20. Exit the OSD
21. Control the cursor in the menu
22. Use to see information on the current broadcast
23. Picture freeze
25. Picture size selection
26. PIP:Picture-In-Picture On / Off
SOURCE: Input source selection
POSITION: PIP position selection
P : Next channel
P : Previous channel
Tteletext Functions
4. Exit from the teletext display
8. Teletext index
15. Teletext mode selection (LIST/FLOF)
16. Teletext sub pag
19. P : Teletext next page
P : Teletext previous page
20. Teletext cancel
22. Teletext reveal
24. Alternately select Teletext, Double, or Mix.
9. 11. 23. 25 Fastext topic selection
26. PIP: Teletext Hold
SOURCE: Teletext Store
POSITION: Teletext size selection
The performance of the remote control may be affected by bright light.
This is a special remote contro for the visually impaired, and has Braille points on the Power, Channel
and Volume buttons.
10-4
10 Operating Instructions and Installation
10-4 Installing the Stand
<2> <3>
1. Place the TV fdown on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 40 inch and above.
10-5 Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the Wall Mount
items. Contact a technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you
elect to install the TV on your own.
Remove the stand and cover the bottom hole with a cap and fasten with two screws.
10-5
10 Operating Instructions and Installation
Memo
10-6