Text preview for : Compliance Test Solution Using the E5071C ENA Option TDR - Brochure Solution 5991-2850EN c20141210 [ part of Agilent Compliance Test Solution Using the E5071C ENA Option TDR - Brochure Solution 5991-2850EN c20141210 [ Agilent Compliance Test Solution Using the E5071C ENA Option TDR - Brochure Solution 5991-2850EN c20141210 [4].pdf
Back to : Compliance Test Solution | Home
Keysight Technologies
Compliance Test Solution
Using E5071C ENA Option TDR
Comprehensive measurement solution
for interconnect analysis
Certiied Solution For High-speed Digital Standards
All high-speed digital standards have technical documents deining the requirement
and measurement parameters to ensure interpretability between devices from different
manufacturers. ENA Option TDR is a certiied solution for cable, connector, transmitter,
or receiver compliance testing of a variety of the standard including USB3.0 or HDMI.
The solution is used worldwide by authorized test centers to perform compliance testing
for the standard.
All method of implementation (MOI) documents, and state iles for the
ENA Option TDR are currently available from the Keysight Technologies, Inc. web site at
www.keysight.com/ind/ena-tdr_compliance. State iles contain pre-conigured setups
in accordance with the standard requirements and allows for quick and easy measure-
ments of your devices.
ENA Option TDR Features
Features Values
one-box solution Frequency domain, time domain, and eye diagram analysis is available in a
single instrument. By observing both the time and frequency domain re-
sponse at the same time, deeper signal integrity insight can be obtained.
Fast and accurate Due to the low noise architecture, oftentimes averaging is not required
measurements as in traditional TDR oscilloscopes. Real-time analysis allows for more
eficient troubleshooting of designs.
ESD Robustness High ESD robustness (up to 3 kV) is achieved through internal protection
circuits, reducing downtime and repair costs dramatically compared to
previous solutions.
Easy and quick setup Certiied MOI documents that guide through necessary compliance tests
are available free of charge. By recalling the state ile, you can easily
setup, measure and perform limit testing for pass/fail judgment.
Hot TDR measurements Hot TDR is the impedance measurement of active devices under actual
operating conditions. The ENA Option TDR provides faster and more ac-
curate impedance measurements of transmitters in operating state.
Certiied High-speed Digital Standards
Cable & Connector assembly