Text preview for : UCC [radial thru-hole] KMG series.pdf part of Chemi-con UCC [radial thru-hole] KMG series . Electronic Components Datasheets Passive components capacitors Chemi-con UCC [radial thru-hole] KMG series.pdf



Back to : UCC [radial thru-hole] KM | Home

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard, Downsized, 105




KMQ
Endurance with ripple current : 1,000 to 2,000 hours at 105 Downsized
Solvent resistant type except 350 to 450Vdc
(see PRECAUTIONS AND GUIDELINES) KMG
RoHS Compliant

SPECIFICATIONS
Items Characteristics
Category
Temperature Range -55 to +105 (6.3 to 100Vdc) -40 to +105 (160 to 400Vdc) -25 to +105 (450Vdc)

Rated Voltage Range 6.3 to 450Vdc
Capacitance Tolerance 20% (M) (at 20 , 120Hz)
Leakage Current 6.3 to 100Vdc 160 to 450Vdc
I=0.03CV or 4 A, whichever is greater. CV Time After 1minute After 5minutes
CV 1,000 I=0.1CV+40 max. I=0.03CV+15 max.
CV>1,000 I=0.04CV+100 max. I=0.02CV+25 max.
(at 20 after 1 minute) ) (at 20
Where, I : Max. leakage current ( A), C : Nominal capacitance ( F), V : Rated voltage (V)
Dissipation Factor Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V
(tan ) tan (Max.) 0.34 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.24 0.24
When nominal capacitance exceeds 1,000 F, add 0.02 to the value above for each 1,000 F increase. (at 20 , 120Hz)
Low Temperature Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V
Characteristics Z(-25 )/Z(+20 ) 5 4 3 2 2 2 2 2 3 6 6
(Max. Impedance Ratio)
Z(-40 )/Z(+20 ) 12 10 8 5 4 3 3 3 4 6 - (at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours (2,000 hours to meet the following two conditions
1): 160Vdc and larger, 2) : 12.5 and larger) at 105 .
Capacitance change 20% of the initial value
D.F. (tan ) 200% of the initial specified value
Leakage current The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage 6.3 to 100Vcd 160 to 450Vdc
Capacitance change 20% of the initial value 20% of the initial value
D.F. (tan ) 200% of the initial specified value 200% of the initial specified value
Leakage current The initial specified value 500% of the initial specified value

DIMENSIONS [mm]
Terminal Code : E
0.5
0.5




Sleeve (PET : Brown)
d




D 5 6.3 8 10 12.5 16 18
D'




d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
D' D+0.5max
L' 15min. 4min. L' L+1.5max
( 5 to 10) ( 12.5 to 18)
Vent Gas escape end seal
(except 5)


PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

E KMG A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 1.0 F:1R0,10 F:100,100 F:101)
Lead forming