Text preview for : PANASONIC CT-2733H_simpl.pdf part of Panasonic CT-2733HF_NA8MS PANASONIC_CT-2733HF_NA8MS_chassis
Back to : PANASONIC_CT-2733HF_NA8MS | Home
file:///C|/Documents%20and%20Settings/Administrator/Plocha/S...TA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-cover.htm
Service Manual
TOP NEXT
MTNC030312A1
B05
Color Television
q CT-2733HF
NA8MS
This simplified service manual is issued to add listed models to the simplified service manual order MTNC020203A1 (CT-
27SX12F). Unique settings and parts list are included in this simplified manual.Please file and use this simplified service
manualtogether with the simplified service manual order MTNC020203A1 (CT-27SX12F) and the main service manual order
No. MTNC010527C1 (CT-27SX11E).
© 2003 Matsushita Electric Corporation of America. All rights reserved. Unauthorized copying and distribution is a violation of
law.
file:///C|/Documents%20and%20Settings/Adminis...NIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-cover.htm (1 of 2) [30.5.2003 23:54:16]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/S...TA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-cover.htm
TOP NEXT
file:///C|/Documents%20and%20Settings/Adminis...NIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-cover.htm (2 of 2) [30.5.2003 23:54:16]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...IDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-FEATURES.htm
4 Receiver feature table
TOP PREVIOUS NEXT
FEATURE/MODEL CT-2733HF
CHASSIS GP368
TUNNING SYSTEM GEN III
CLOSE CAPTION X
V-CHIP X
CHANNEL COUNT 181
75 OHM INPUT X
REMOTE NOT INCLUDED
CRT SUPPLIER SAMSUNG (FLAT)
CHASSIS NA8MS
COMB FILTER 3 DIG
HEC/VEC (X=BOTH) VEC
VM X
V/A NORM (X=BOTH) V
COLOR TEMP X
AUTO ON X
MTS/SAP/DBX X
BUILT-IN AUDIO POWER 7WX2
No. OF SPEAKERS 2
SPEAKER TYPE DOME
BASS/BALANCE/TREBLE CONTROL X
AI SOUND X (ALWAYS ON)
SURROUND/BBE BBE
A/V (REAR/FRONT) 3(2/1)
S-VHS INPUT (REAR/FRONT) 1/1
COMPONENT INPUT (REAR/FRONT) 1/0
SMART PLUG INTERFACE SMART PLUG (RJ-11)
AUDIO LINE OUT STEREO
MISC GEN 3 MICRO FOR SPECTRADYNE
EPJ/HPJ/MISC HPJ
file:///C|/Documents%20and%20Settings/Admini...20SCHÉMATA/COLOR%20TV/CT-2733HF-FEATURES.htm (1 of 2) [30.5.2003 23:55:01]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...IDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-FEATURES.htm
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Admini...20SCHÉMATA/COLOR%20TV/CT-2733HF-FEATURES.htm (2 of 2) [30.5.2003 23:55:01]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...A/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-CLONE.htm
6 Clone Box Use
TOP PREVIOUS NEXT
The clone box uploads (LEARN) the settings of one television and downloads (TEACH) them to other
televisions. This places the television into Hotel Mode.
NOTE:
The Clone Box is not supplied with the set. It can be purchased separately.
6.1 Setting the"Master" Television
6.2 Uploading Television Settings into the Clone Box (LEARN)
6.3 Downloading Settings into Other Televisions (TEACH)
6.4 Setting Individual Volume Limits
6.4.1 For lower volume
6.4.2 For higher volume
6.5 Testing the Settings in the Clone Box
6.6 Testing the Clone Box Battery
6.7 Resetting the Television to Normal TV Mode
6.8 Setting the Television without a Clone Box
6.8.1 Switching to Hotel Mode (All Models)
6.8.2 Switching to Normal TV Mode
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...SONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-CLONE.htm [30.5.2003 23:53:51]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...ATA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-SET.htm
6.1 Setting the"Master" Television
TOP PREVIOUS NEXT
The features listed in the HOTEL Mode table must be adjusted before cloning can begin.
1. Turn the television ON.
2. Access the Main Menu by pressing the ACTION button.
3. Access the Set Up menu.
r Use the CH and VOL buttons to highlight the Set Up icon, then press the ACTION button
r Use the CH buttons to highlight AUTO PROG (Auto Channel Programming), then press
the VOL button to begin programming.
NOTE:
This step is mandatory.
r If necessary, use MANUAL PROG (Manual Channel Programming) to delete any
undesired channels.
r Press the ACTION button to return to the Main Menu.
4. If necessary, access the Picture menu.
r Use the CH and VOL buttons to highlight the Picture icon, then press the ACTION button.
r Use the CH buttons to highlight a feature, then press the VOL buttons to adjust them.
r Press the ACTION button to return to the Main Menu.
5. If desired, access the CHANNELS menu
r Use the CH and VOL buttons to highlight CHANNELS icon, then press the ACTION
button.
file:///C|/Documents%20and%20Settings/Admini...ONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-SET.htm (1 of 2) [30.5.2003 23:56:53]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...ATA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-SET.htm
r Highlight MANUAL CAPTION and press VOL ¡.
r Use numeric keypad or Vol buttons to select desired channels. Use the CH buttons to
highlight the character position, then press the VOL buttons to select characters for the
channel caption.
r Press the ACTION button to return to the Main Menu.
6. If desired, access the SET UP menu to set the Energy Management feature. This feature lets you
program the television to turn OFF after a pre-determined period of time from the last keyed-in
instruction (pressing any buttons on the TV or onthe remote control) received by the television.
r Use the CH and VOL buttons to highlight the Setup icon, then press the ACTION button.
r Use the CH buttons to highlight the Energy Management feature.
r Press VOL or ¡ button to select OFF or 1 through 15 Hours.
7. Exit the Main Menu by pressing the ACTION button.
8. If necessary, set the maximum volume level.
9. If the hotel has hotel "barker" channel, tune the set to the "barker" channel.
NOTE:
Auto Power On feature setting, Audio settings and Channels menu settings can also be cloned.
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Admini...ONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-SET.htm (2 of 2) [30.5.2003 23:56:53]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...ATA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-UPL.htm
6.2 Uploading Television Settings into
the Clone Box (LEARN)
TOP PREVIOUS NEXT
1. Press the POWER ON button on the clone box.
r The LEDs will flash red and green to confirm power is ON.
2. Connect the clone box to the Digital Interface port on the back of the television.
r The television must be plugged into an AC outlet but can be either OFF or ON.
3. Hold the ALT button while pressing the LEARN button.
r The red LED will flash while the data is uploaded to the box. The green LED will light for
about two (2) seconds when the procedure is complete.
NOTE:
The television is now in HOTEL Mode.
4. Disconnect the clone box from the television and turn it OFF.
NOTE:
Data is not lost even if the battery is removed.
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...NASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-UPL.htm [30.5.2003 23:59:06]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...A/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-DOWNL.htm
6.3 Downloading Settings into Other
Televisions (TEACH)
TOP PREVIOUS NEXT
1. Press the POWER ON button on the clone box.
r The LEDs will flash red and green to confirm power is ON.
2. Connect the clone box to the Digital Interface port on the back of the television.
r The television must be plugged into an AC outlet but can be either OFF or ON.
3. Press the TEACH button.
r The green LED will flash while data is downloaded to the television. The green LED will
light for about two (2) seconds when the procedure is complete.
NOTE:
The television is now in HOTEL Mode.
4. Disconnect the clone box from the television and turn it OFF.
5. Repeat steps 1 through 4 to set up other televisions.
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...SONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-DOWNL.htm [30.5.2003 23:54:46]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/S...A/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-SETIND.htm
6.4 Setting Individual Volume Limits
TOP PREVIOUS NEXT
This procedure allows the maximum volume level to be changed on individual televisions.
6.4.1 For lower volume
6.4.2 For higher volume
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...ONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-SETIND.htm [30.5.2003 23:57:37]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...ATA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-FOR.htm
6.4.1 For lower volume
TOP PREVIOUS NEXT
The television must be in HOTEL mode.
1. Turn television ON.
2. Adjust the television volume to desired level.
NOTE:
This will become the new maximum volume level
3. Press the POWER ON button on the clone box.
r The LEDs will flash red and green to confirm power is ON.
4. Connect the clone box to the Digital Interface port on the back of the television.
5. Hold the ALT button while pressing the LEARN button on the clone box.
r The red LED will flash while the data is uploaded into the box. The green LED will light
for about two (2) seconds when the procedure is complete.
6. Disconnect the clone box from the television and turn it OFF.
7. Reset the volume on the television.
8. Refer to the section entitled Downloading Settings into Other Televisions (TEACH).
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...NASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-FOR.htm [30.5.2003 23:55:23]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/S.../VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-FORHIGH.htm
6.4.2 For higher volume
TOP PREVIOUS NEXT
The television must be in Normal TV mode. Refer to the section entitled Resetting the Television to
Normal TV mode.
1. Turn television ON.
2. Adjust the television volume to the minimum setting.
3. Press the POWER ON button on the clone box.
r The LEDs will flash red and green to confirm power is ON.
4. Connect the clone box to the Digital Interface port on the back of the television.
5. Adjust the television volume to maximum desired level.
6. Hold the ALT button while pressing the LEARN button on the clone box
r The red LED will flash while the data is uploaded into the box. The green LED will light
for about two (2) seconds when the procedure is complete.
r If the green LED does not light for about two (2) seconds, retry by holding the ALT button
while pressing the LEARN button.
7. Disconnect the clone box from the television and turn it OFF.
8. Reset the volume on the television.
9. Refer to the section entitled Downloading Settings into Other Televisions (TEACH).
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...NIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-FORHIGH.htm [30.5.2003 23:55:40]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/S...ATA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-TEST.htm
6.5 Testing the Settings in the Clone Box
TOP PREVIOUS NEXT
This test compares the clone box settings with the television settings. The television must be in HOTEL
mode
1. Press the POWER ON button on the clone box.
r The LEDs will flash red and green to confirm power is ON.
2. Connect the clone box to the Digital Interface port on the back of the television.
r The television must be plugged into an AC outlet but can be either OFF or ON.
3. Press the TEST button.
r The LEDs will flash red and green while the data is compared. The green LED will light
for about two (2) seconds if the settings in the box match the television.
4. Disconnect the clone box from the television and turn it OFF.
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...ASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-TEST.htm [30.5.2003 23:57:55]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/S.../VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-TESTBOX.htm
6.6 Testing the Clone Box Battery
TOP PREVIOUS NEXT
1. Press the POWER ON button on the clone box.
r The LEDs will flash red and green to confirm power is ON.
2. Hold the ALT button while pressing the TEST button.
r The LEDs will alternately flash red and green while the box is tested.
NOTE:
Replace the 9 volt battery if the LEDs do not flash red and green.
r The green LED will light for about two (2) seconds, if battery is charged.
NOTE:
If the green LED does not light for about two (2) seconds at the end of the test, new data
must be downloaded into the box.
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...NIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-TESTBOX.htm [30.5.2003 23:58:12]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/S...TA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-RESET.htm
6.7 Resetting the Television to Normal TV
Mode
TOP PREVIOUS NEXT
1. Press the POWER ON button on the clone box
r The LEDs will flash red and green to confirm power is ON
2. Connect the clone box to the Digital Interface port on the back of the television.
r The television must be plugged into an AC outlet but can be either OFF or ON
3. Press the AMS button.
NOTE:
Insert a slender tool about 3/4 inch (paper clip) into the opening.
r The green LED will flash while the television is reset to TV mode. The green LED will
light for about two (2) seconds when the procedure is complete.
4. Disconnect the clone box from the television and turn it OFF.
5. Press the ACTION + POWER buttons on the front of the set for 5 seconds to reset the TV to
factory default mode. Any programed channel, channel caption and other user defined settings
will be lost.
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...SONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-RESET.htm [30.5.2003 23:56:35]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/...IDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-SETCLONE.htm
6.8 Setting the Television without a Clone
Box
TOP PREVIOUS NEXT
6.8.1 Switching to Hotel Mode (All Models)
6.8.2 Switching to Normal TV Mode
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...IC%20SCHÉMATA/COLOR%20TV/CT-2733HF-SETCLONE.htm [30.5.2003 23:57:08]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/S...TA/VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-HOTEL.htm
6.8.1 Switching to Hotel Mode (All
Models)
TOP PREVIOUS NEXT
Adjust the features listed in the HOTEL Mode Feature Chart before switching modes.
1. Press the ACTION and the VOL ¡ buttons on the front control panel simultaneously.
2. Within a second, press the ACTION and the CH buttons on the front control panel
simultaneously.
3. ON will flash in red in the lower corner of the screen, indicating HOTEL Mode.
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...SONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-HOTEL.htm [30.5.2003 23:55:55]
file:///C|/Documents%20and%20Settings/Administrator/Plocha/.../VIDEA/PANASONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-NORMAL.htm
6.8.2 Switching to Normal TV Mode
TOP PREVIOUS NEXT
1. Repeat steps 1 and 2 from the previous section.
2. OFF will flash in red in the lower corner of the screen, indicating Normal TV Mode.
TOP PREVIOUS NEXT
file:///C|/Documents%20and%20Settings/Administr...ONIC%20SCHÉMATA/COLOR%20TV/CT-2733HF-NORMAL.htm [30.5.2003 23:56:11]