Text preview for : Wendell [snap-in] LS Series.pdf part of Wendell+++ Wendell [snap-in] LS Series . Electronic Components Datasheets Passive components capacitors Wendell+++ Wendell [snap-in] LS Series.pdf



Back to : Wendell [snap-in] LS Seri | Home

LS Series Aluminum Electrolytic Capacitors


85 Large size type with snap-in terminals.
Used in audio, OA equipment, power supply etc.

Specification

ITEM SPECIFICATION
Capacitance Tolerance
+-20% (M)
(120Hz, 20)

Rated Working Voltage 10 ~ 100WV 160 ~ 450WV
Operation Temperature Range -40 ~ +85 -25 ~ +85
W.V. 10 16 25 35 50 63 80 100 160 200 250 350 400 450
Surge Voltage (V)
(20) S.V. 13 20 32 44 63 79 100 125 200 250 300 400 450 500

I0.01CV or 3uA Whichever is greater I0.03CV + 10
Leakage Current After 2 minutes application of rated voltage
(20)

I : Leakage Current (uA) C : Capacitance (uF) V : Rated Voltage (V)
W.V. 10 16 25 35 50 63 80 100 160 200 250 350 400 450
Dissipation Factor (tan)
D.F. 0.40 0.40 0.30 0.30 030 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
(120Hz, 20)
Add 0.02 per 1000uF for more than 1000uF

Impedance ratio at 120Hz
Comparison
Low Temperature Z/WV 10 16 25 35 50 63 80 100 160 200 250 350 400 450
Characteristics -25/20 3 2 2 2 2 2 2 2 3 3 3 4 4 4
-40/20 6 4 4 3 3 3 3 3 - - - - - -



CapacitanceAfter applying rated voltage for 1000 hours at 85then:
Change Within +-20% of initial value
Load Life
Dissipation Factor No more than 200% of initial specified value
Leakage Current No more than initial specified value
After 500 hours to place at 85without rated voltage applied,
Shelf Life



the capacitor shall meet the limits as same as load life.


Dimensions (unit: mm)


Ripple Current Coefficients

Frequency Multipliers

Frequency (Hz) 50 60 120 400 1k 2.4k 5k 10k

coefficient 0.80 0.85 1.00 1.14 1.23 1.30 1.36 1.40
Temperature Multipliers

Temperature () 40 45 50 55 60 65 70 75 80 85
coefficient 2.32 2.21 2.10 1.98 1.85 1.72 1.57 1.40 1.22 1.00
LS Series Aluminum Electrolytic Capacitors



Case Size & Max Permissible Ripple Current

WV 10 16 25 35 50 63 80
Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C.
uF
2200 22x25 1.80 22x30 2.00 22x40 2.45
3300 22x35 2.20 22x40 2.55 25x40 3.10
4700 22x30 2.30 22x40 2.70 25x40 3.15 30x40 3.80
5600 22x25 2.20 22x35 2.60 25x35 3.00 25x45 3.50 30x45 4.20
6800 22x30 2.45 22x40 2.90 25x40 3.35 30x40 3.90 30x50 4.70
8200 22X25 2.45 22x35 2.75 25x35 3.20 30x40 3.70 30x45 4.35 35x50 5.25
10000 22X30 2.60 22x40 3.10 25x40 3.60 30x45 4.20 30x50 4.90
12000 22X35 2.90 25x35 3.40 30x35 4.00 30x50 4.65 35x50 5.45
15000 25X30 3.30 25x40 3.90 30x40 4.60 35x45 5.30
18000 25X25 3.15 25X35 3.70 30x40 4.30 30x45 5.10 35x50 5.90
22000 25X30 3.50 30X30 4.15 30x45 4.85 35x45 5.70
27000 25X35 4.00 30X35 4.65 30x50 5.45 35x50 6.45
33000 25x40 4.45 30x40 5.25 35x45 6.15
39000 25x45 4.90 30x45 5.80
47000 30x40 5.50 35x40 6.45
56000 30x45 6.05




WV 100 160 200 250 350 400 450
Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C.
uF
56 22x25 0.55
68 22x25 0.60 22x30 0.60
82 22x25 0.70 22x25 0.70 22x30 0.70
100 22x30 0.80 22x30 0.80 22x35 0.80
220 22x25 1.00 22x30 1.15 25x35 1.30 25x40 1.30 30x40 1.30
330 22x25 1.35 22x35 1.30 22x35 1.45 30x40 1.65 30x40 1.70 30x50 1.70
390 22x30 1.50 22x35 1.45 25x35 1.60 30x45 1.80 30x45 1.85 35x45 1.85
470 22x35 1.70 22x40 1.65 25x35 1.80 30x50 2.10 35x40 2.10 35x50 2.10
560 22x35 1.90 25x40 1.85 25x40 2.00 35x45 2.30 35x50 2.30
680 22x40 2.15 25x40 2.10 30x40 2.30 35x50 2.60
1000 22x30 1.95 25x40 2.75 30x45 2.60 30x50 2.90
1200 22x35 2.15 30x40 3.05 30x50 2.90 35x45 3.25
1500 22x40 2.75 30x45 3.50 35x50 3.20
2200 25x40 3.05 35x45 4.50
3300 30x40 3.90
4700 35x40 4.30


Remark: 1. Case Size: D x L (mm)


2. R.C. (Max Permissible Ripple Current): A/ 85, 120Hz.