Text preview for : Panel_LG-Philips_LCD_LM201U05-SLA1_0_[DS].pdf part of . Various Panel LG-Philips LCD LM201U05-SLA1 0 [DS] . Various LCD Panels Panel_LG-Philips_LCD_LM201U05-SLA1_0_[DS].pdf
Back to : Panel_LG-Philips_LCD_LM20 | Home
Global LCD Panel Exchange Center www.panelook.com
LM201U05
Liquid Crystal Display
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ) Final Specification
Title 20.1" UXGA TFT LCD
BUYER DELL SUPPLIER LG.Philips LCD CO., Ltd.
MODEL *MODEL LM201U05
SUFFIX SLA1
*When you obtain standard approval,
please use the above model name without suffix
SIGNATURE DATE
/
/
/
Please return 1 copy for your confirmation with
your signature and comments.
Ver 1.0 Dec. 30. 2005 1 /27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM201U05
Liquid Crystal Display
Product Specification
CONTENTS
NO. ITEM Page
- COVER 1
- CONTENTS 2
- RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTERISTICS 6
3-2 INTERFACE CONNECTIONS 8
3-3 SIGNAL TIMING SPECIFICATIONS 10
3-4 SIGNAL TIMING WAVE FORMS 11
3-5 COLOR INPUT DATA REFERENCE 12
3-6 POWER SEQUENCE 13
4 OPTICAL SPECIFICATIONS 14
5 MECHANICAL CHARACTERISTICS 19
6 RELIABILITY 22
7 INTERNATIONAL STANDARDS 23
7-1 SAFETY 23
7-2 EMC 23
8 PACKING 24
8-1 DESIGNATION OF LOT MARK 24
8-2 PACKING FORM 24
9 PRECAUTIONS 25
10 OTHERS -
APPENDIX 1. REQUIRED SIGNAL ASSIGNMENT FOR FLATLink Transmitter 27
Ver 1.0 Dec. 30. 2005 2 /27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM201U05
Liquid Crystal Display
Product Specification
RECORD OF REVISIONS
Revision No Date Page Description
0.0 Jun. 23. 2005 First Draft, Preliminary Specifications
0.1 Nov. 08. 2005 24 Change Packing information.
1.0 Dec. 30. 2005 6, 7 Change of the form for notes of Lamp.
Final Draft.
Ver 1.0 Dec. 30. 2005 3 /27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM201U05
Liquid Crystal Display
Product Specification
1. General Description
The LM201U05-SLA1 s a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. This TFT-LCD has a 20.1 inch diagonally
measured active display area with UXGA resolution(1200 vertical by 1600 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus, presenting a palette of more than 16,777,216 colors.
The LM201U05-SLA1 has been designed to apply the interface method that enables low power, high speed,low
EMI. FPD Link must be used as a LVDS(Low Voltage Differential Signaling) chip.
The LM201U05-SLA1 is intended to support applications where thin thickness, wide viewing angle, low power are
critical factors and graphic displays are important. In combination with the vertical arrangement of the sub-pixels,
the LM201U05-SLA1 characteristics provide an excellent flat panel display for office automation products such as
monitors.
G1
Gate Driver Circuit
LVDS
pair #1
CN1 Timing Controller
(30pin)
LVDS
LVDS 1 Chip TFT - LCD Panel
pair #2 (1600 RGB 1200 pixels)
G1200
S1 S1600
+18V RGB
Power Circuit
Vcc Block Source Driver Circuit
CN1(4pin),CN2(2pin))
Back light Assembly (6CCFL)
CN3(2pin),CN4(4pin)
General Features
Active screen size 20.1 inches (510.54mm) diagonal
Outline Dimension 432.0(H) x 331.5(V) x 25.0(D) mm(Typ.)
Pixel Pitch 0.255 mm x 0.255 mm
Pixel Format 1600 horizontal By 1200 vertical Pixels RGB stripe arrangement
Color depth 8-bits, 16,777,216 colors
Luminance, white 300 cd/m2(Typ. Center 1 point)
Power Consumption Total 36.6 Watt(Typ.), ( 7.2 Watt @Vcc, 29.4 Watt @300cd/ [Lamp=7.0mA])
Weight 3200g (Typ.)
Display operating mode Transmissive mode, normally black
Surface treatments Hard coating (3H), Anti-glare treatment of the front polarizer
Ver 1.0 Dec. 30. 2005 4 /27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM201U05
Liquid Crystal Display
Product Specification
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Table 1. ABSOLUTE MAXIMUM RATINGS
Values
Parameter Symbol Units Notes
Min. Max.
Power Input Voltage VCC 0.3 23 V dc at 25
Operating Temperature TOP 0 50 1
Storage Temperature TST 20 60 1
Operating Ambient Humidity HOP 10 90 %RH 1
Storage Humidity HST 10 90 %RH 1
Note : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 C Max, and no condensation of water.
Ver 1.0 Dec. 30. 2005 5 /27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM201U05
Liquid Crystal Display
Product Specification
3. Electrical Specifications
3-1. Electrical Characteristics
The LM201U05-SLA1requires two power inputs. One is employed to power the LCD electronics and to
drive the TFT array and liquid crystal. The second input which powers the CCFL, is typically generated
by an inverter. The inverter is an external unit to the LCD.
Table 2. ELECTRICAL CHARACTERISTICS
Values
Parameter Symbol Units Notes
Min. Typ. Max.
MODULE:
Power Supply Input Voltage VCC 18V 20V 22V Vdc
Power Supply Input Current ICC 0.36 0.54 A 1
Power Consumption Pc 7.2 10.8 W 1
Differential Impedance Zm 100 Ohm 2
Rush Current IRush 3 A 3
LAMP (each CCFL)
Operating voltage VBL - 630 - VRMS 4, 6
Operating Current IBL 3.0 7.0 7.5 mA 5
Established Starting Voltage Vs 5, 7
at 25 - - 1150 VRMS
at 0 - - 1450 VRMS
Operating Frequency FBL 40 50 80 KHz 8
Power Consumption (6 CCFL's) PBL - 29.4 32.3 Watts 5, 10
Discharge Stabilization Time Ts - - 3 Minutes 9
Life time 45000 - - Hours 5, 11
Notes : 1. The specified current and power consumption are under the VCC=18.0V, 25 C, fV=60Hz condition,
Typical supply current is measured at the condition of 8 X 6 chess pattern (white black)
and Max supply Current is measured at the Sub 1dot pattern
2. This impedance value is for impedance matching between LVDS TX and
the mating connector of the LCD.
3. The duration of rush current is about 1ms.
4. It is only reference voltage in LCM.
5. Specified values are for a single lamp.
6. Operating voltage is measured at 25 r 2 C.
7. The voltage above VS should be applied to the lamps for more than 1 second for start-up.
(Inverter open voltage must be more than lamp starting voltage.)
Otherwise, the lamps may not be turned on. The used lamp current is the lamp typical current.
8. Lamp frequency may produce interface with horizontal synchronous frequency and as a result this
may cause beat on the display. Therefore lamp frequency shall be as away possible from the
horizontal synchronous frequency and from its harmonics in order to prevent interference.
9. Let's define the brightness of the lamp after being lighted for 5 minutes as 100%.
TS is the time required for the brightness of the center of the lamp to be not less than 95%.
10. The lamp power consumption shown above does not include loss of external inverter.
The used lamp current is the lamp typical current. (PBL = VBL x IBL x NLamp )
11. The life is determined as the time at which brightness of the lamp is 50% compared to that of initial
value at the typical lamp current on condition of continuous operating at 25 r 2 C.
Ver 1.0 Dec. 30. 2005 6 /27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM201U05
Liquid Crystal Display
Product Specification
Note. The design of the inverter must have specifications for the lamp in LCD Assembly.
The performance of the Lamp in LCM, for example life time or brightness, is extremely influenced by
the characteristics of the DC-AC inverter. So all the parameters of an inverter should be carefully
designed so as not to produce too much leakage current from high-voltage output of the inverter.
When you design or order the inverter, please make sure unwanted lighting caused by the mismatch
of the lamp and the inverter(no lighting, flicker, etc) never occurs. When you confirm it, the LCD