Text preview for : Panel_AUO_T370HW03_V6_CELL_0_[DS].pdf part of . Various Panel AUO T370HW03 V6 CELL 0 [DS] . Various LCD Panels Panel_AUO_T370HW03_V6_CELL_0_[DS].pdf
Back to : Panel_AUO_T370HW03_V6_CEL | Home
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Document Version : 2
Date : 2009/7/3
Product Specifications
37" FHD Color TFT-LCD SKD Panel
Model Name: T370HW03 V6
() Preliminary Specifications
(*) Final Specifications
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Contents
No
COVER
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTE MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATIONS
3-1 ELECTRICAL CHARACTREISTICS
3-2 INTERFACE CONNECTIONS
3-3 SIGNAL TIMING SPECIFICATIONS
3-4 SIGNAL TIMING WAVEFORMS
3-5 COLOR INPUT DATA REFERNECE
3-6 POWER SEQUENCE
4 OPTICAL SPECIFICATIONS
5 RELIABLITY
6 PACKING
7 PRECAUTIONS
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Record of Revision
Version Date No Old Description New Description Remark
0 2009/3 First issue
1 2009/4 Update mechanical drawing
2 2009/7 Modify packing part
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
1. General Description
This specification applies to the 37.0 inch Color TFT-LCD SKD model, T370HW03 V6. This
LCD module has a TFT active matrix type liquid crystal panel 1920*1080 pixels, and
diagonal size of 37.0 inch. This module supports 1920*1080 HDTV mode (Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in
vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit
gray scale signal for each dot.
* General Information
Items Specification Unit Note
Active Screen Size 37.01 inch
Display Area 819.36 (H) x 460.89(V) mm
Outline Dimension 842.6(H) x 485.8(V) x 1.82(D) mm
Driver Element a-Si TFT active matrix
Display Colors 8 bit, 16.7M Colors
Number of Pixels 1920 x 1080 Pixel
Pixel Pitch 0.42675 mm
Pixel Arrangement RGB vertical stripe
Display Operation Mode Normally Black
Contrast Ratio 5000:1 Base on AUO BLU
Brightness 500nits Base on AUO BLU
Surface Treatment SC
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause permanent damage to the
unit.
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1
Input Voltage of Signal Vin -0.3 3.6 [Volt] Note 1
Operating Temperature TOP 0 +50 [oC] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
o
Storage Temperature TST -20 +60 [ C] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
Panel Surface Temperature PST 65 [oC] Note 3
Note 1: Duration:50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures
greater than 40 , the wet bulb temperature must not exceed 39 .
Note 3: Surface temperature is measured at 50 Dry condition
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3. Electrical Specification (open cell)
The T370HW03 V6 requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. The second input power for the BLU, is to power inverter. (INV)
3-1 Electrical Characteristics
Parameter Values Unit Notes
Min Typ Max
LCD:
Power Supply Input Voltage Vcc 10.8 12 13.2 Vdc 1
Power Supply Input Current Icc - 1 1.5 A 2
Power Consumption Pc - 12 18 Watt 2
Inrush Current IRUSH - - 2.5 Apeak 3
LVDS Differential Input High Threshold VTH 100 mV 4
Interface Voltage
Differential Input Low Threshold VTL -100 mV 4
Voltage
Common Input Voltage VCIM 1.1 1.25 1.4 V 4
CMOS Input High Threshold Voltage VIH 2.4 3.3 Vdc
Interface (High)
Input Low Threshold Voltage VIL 0 0.9 Vdc
(Low)
Life Time 50,000 Hours
Note :
1. The ripple voltage should be controlled under 10% of VCC
2. Vcc=12.0V, f v = 60Hz, fCLK=81.5Mhz , 25 , Test Pattern : White Pattern
3. Measurement condition :
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4. VCIM = 1.2V
VTH
VCIM
VIL
0V
3-2 Interface Connections
LCD connector (CN3): JAE FI-RE51S-HF
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note:
1. All GND (ground) pins should be connected together and should also be connected to the LCD's metal
frame. All Vcc (power input) pins should be connected together.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-3 Signal Timing Specifications
This is the signal timing required at the input of the User connector. All of the interface signal timing should be
satisfied with the following specifications for it's proper operation.
* Timing Table
DE only Mode
Notes:
1.) Display position is specific by the rise of DE signal only.
Horizontal display position is specified by the rising edge of 1st DCLK after the rise of 1st DE, is displayed on
the left edge of the screen.
Vertical display position is specified by the rise of DE after a "Low" level period equivalent to eight times of
horizontal period. The 1st data corresponding to one horizontal line after the rise the of 1st DE is displayed at the
top line of screen.
2.) If a period of DEB "High" is less than 1920 DCLK or less than 1080 lines, the rest of the screen displays
black.
3.) The display position does not fit to the screen if a period of DE "High" and the effective data period do not
synchronize with each other.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Tv
Tblk(v) Tdisp(v)
Th
DE
RGB
N Invalid Data 1 2 3 4 N Invalid Data
Data
Line Line Line Line Line Line
www.panelook.com
CLK
Th
Tclk
Tdisp(h) Tblk(h)
3-4 Signal Timing Waveforms
DE
Global LCD Panel Exchange Center
RGB Data Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel
Invalid Data Invalid Data
(odd) M-7 M-5 M-3 M-1 1 3 5 7 9 11 M-5 M-3 M-1 1 3
RGB Data Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel
Invalid Data Invalid Data
(even) M-6 M-4 M-2 M 2 4 6 8 10 12 M-4 M-2 M 2 4
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-6 Power Sequence
Value
Parameter Units
Min. Typ. Max.
T1 0.4 --- 30 ms
T2 0.1 --- 50 ms
T3 300 --- --- ms
T4 10 --- --- ms
T5 0.1 --- 50 ms
T6 --- --- 300 ms
T7 500 --- --- ms
Note:
The timing controller will not be damaged in case of TV set AC input power suddenly shut down.
Once power reset, it should follow power sequence as spec. definition.
(1) Apply the lamp voltage within the LCD operation range. When the back-light turns on before the LCD
operation or the LCD turns off before the back-light turns off, the display may momentarily become
abnormal screen.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4. Optical Specification
Optical characteristics are determined after the unit has been `ON' and stable for approximately 45 minutes in a
dark environment at 25 . The values specified are at an approximate distance 50cm from the LCD surface at a
viewing angle of and equal to 0